From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Thu, 14 Jun 2007 10:51:28 +0200 Subject: [U-Boot-Users] Are there any instructions how to compile U-bootfor ixp425 target? In-Reply-To: <46597312D56D2A47A3A6E9C1D0D9B7AEB0C2BD@kpladc0001.konzeptpark.intra> References: <330EC2471BF24E48B513AF1A6975EB690C82F4@MAIL-UA.ccs.local> <200706131405.51197.sr@denx.de> <46597312D56D2A47A3A6E9C1D0D9B7AEB0C2BD@kpladc0001.konzeptpark.intra> Message-ID: <200706141051.28648.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Carsten, On Thursday 14 June 2007, Carsten Schlote wrote: > I'm working on a Moxa UC7420 and started porting of U-Boot about 2 weeks > ago. > That is what I've done: > > YOU HAVE TO USE MICROCODE VERSION 2.0!!! > > ?? I used the latest 2.4 micro code. Both NIC interfaces seem to work, > but there seems to be a 'stall' and checksum problem with tftp > transfers. > > Are there stalls/hangs with 2.0 microcode? Is this problem known? > Somebody working on this issue? It's not known. At least not to me. Please give version 2.0 a try and let us know if the behavior changed. Thanks. > Otherwise I think, that we should collect all our experiences with the > IXP4xx CPUs and how-to compile U-Boot. It took most of my time to find > the shattered pieces of information :-) Please add a dedicated ReadMe > file to the master branch somewhere, and I will add a 'walk through > guide'. When others do so as well, this document could help with most of > the probs. README would be good. Please add it yourself and send a patch to include it. I'll comment on it. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================