From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 2 Jul 2007 23:56:49 +0200
Subject: [U-Boot-Users] U-Boot-NG ?
In-Reply-To: <1183408646.3393.23.camel@loki>
References: <20070630020850.22A711B2CB9@mercury.denx.de>
	<20070702164755.GC3361@leda.ptxnet.pengutronix.de>
	<1183402971.3393.2.camel@loki>
	<20070702192657.GC2533@pengutronix.de>
	<1183408646.3393.23.camel@loki>
Message-ID: <20070702215649.GD2533@pengutronix.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Mon, Jul 02, 2007 at 10:37:26PM +0200, Carsten Schlote wrote:
> Hi Sascha,
> 
> Am Montag, den 02.07.2007, 21:26 +0200 schrieb Sascha Hauer:
> 
> > I'm too using ld-2.17:
> > GNU ld (GNU Binutils for Debian) 2.17.50.20070426
> Here (debian/etch):
> GNU ld version 2.17 Debian GNU/Linux
> 
> Maybe one of your patch levels introduced CONSTANT as glue to support
> different pagesizes with the same linker script?
> 
> > gcc version is 4.1.2.
> Here:
> gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
> 
> > with 'ld --verbose'. Maybe a diff between yours and the one used in
> > U-Boot can give some light?
> 
> > ld --verbose 
>  ...
>   . = ALIGN (0x1000) - ((0x1000 - .) & (0x1000 - 1)); . =
> DATA_SEGMENT_ALIGN (0x1000, 0x1000);
>  ...
> 
> This is the line causing the problem. As you can see, my ld uses
> hardwired constants, not CONSTANT(...). 
> 
> As CONSTANT() is not documented on the sourceware.org/binutils pages I
> presume it's a non-mainstream extension. 
> 
> Maybe we can distinguish between ia64 and i386 targets and set defines
> appropriately in u-boot.lds.h? Or use only mainstream LD builtins for
> our links scripts.

I first used a linker script from um-linux, but there were some linux
specific things in it, so I switched to the one from ld. On x86-64 the
image size is around 2MB, so maybe the one from the kernel was the
better choice

Regards
  Sascha

-- 
Pengutronix - Linux Solutions for Science and Industry
Entwicklungszentrum Nord     http://www.pengutronix.de