[U-Boot-Users] New architecture -- TI DaVinci

[U-Boot-Users] New architecture -- TI DaVinci

[Peter Pearse]

Sergey

	Apologies - you fooled me with the "New Architecture". 
I did a quick google & found the TMS320DM6443 was a DSP, so assumed it
would be a new DSP architecture, 
rather than being part of arm. 

I don't always know where ARM cores have been used - it helps if the
email subject mentions ARM.

I'll add your patch to my list.

Peter

-- 
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium.  Thank you.

[U-Boot-Users] New architecture -- TI DaVinci

[ksi at koi8.net]

On Tue, 8 May 2007, Peter Pearse wrote:

OK, thanks.

> Sergey
>
> 	Apologies - you fooled me with the "New Architecture".
> I did a quick google & found the TMS320DM6443 was a DSP, so assumed it
> would be a new DSP architecture,
> rather than being part of arm.
>
> I don't always know where ARM cores have been used - it helps if the
> email subject mentions ARM.
>
> I'll add your patch to my list.
>
> Peter
>
> -- 
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient, please notify the sender immediately and do not disclose the
> contents to any other person, use it for any purpose, or store or copy
> the information in any medium.  Thank you.
>
>
>

---
******************************************************************
*  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
*  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
******************************************************************

[U-Boot-Users] New architecture -- TI DaVinci

[ksi at koi8.net]

On Tue, 8 May 2007, Peter Pearse wrote:

Sorry for bothering, is there any news on that DaVinci support? I'm working
on it and I have some new boards added and other changes so I would like to
do smaller patches against the git tree rather than regenerating the big
patch every time...

> Sergey
>
> 	Apologies - you fooled me with the "New Architecture".
> I did a quick google & found the TMS320DM6443 was a DSP, so assumed it
> would be a new DSP architecture,
> rather than being part of arm.
>
> I don't always know where ARM cores have been used - it helps if the
> email subject mentions ARM.
>
> I'll add your patch to my list.
>
> Peter
>
> -- 
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient, please notify the sender immediately and do not disclose the
> contents to any other person, use it for any purpose, or store or copy
> the information in any medium.  Thank you.
>
>
>

---
******************************************************************
*  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
*  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
******************************************************************

[U-Boot-Users] New architecture -- TI DaVinci ARM

[Philip Balister]

I am also very interested in this. I have started hacking at supporting 
the Lyrtech SFF SDR board, and trying to do so in a way the patches can 
be accepted. (I am trying to figure out git and the coding standards).

My work is based of the TI work (I think, the patch came via the 
internet) and I have looked at Sergey's patch, although I think he needs 
to rework the multiple board support.

I would like to see us get some stuff moving into the mainline git so we 
can build some structure for people to work with. I am really thrashing 
about trying to get NAND support going. I know people have solved this 
problem, but I can't see the right way to go.

The davinci people really need to get this stuff flowing into git.

Philip

ksi at koi8.net wrote:
> On Tue, 8 May 2007, Peter Pearse wrote:
> 
> Sorry for bothering, is there any news on that DaVinci support? I'm working
> on it and I have some new boards added and other changes so I would like to
> do smaller patches against the git tree rather than regenerating the big
> patch every time...
> 
>> Sergey
>>
>> 	Apologies - you fooled me with the "New Architecture".
>> I did a quick google & found the TMS320DM6443 was a DSP, so assumed it
>> would be a new DSP architecture,
>> rather than being part of arm.
>>
>> I don't always know where ARM cores have been used - it helps if the
>> email subject mentions ARM.
>>
>> I'll add your patch to my list.
>>
>> Peter
>>
>> -- 
>> IMPORTANT NOTICE: The contents of this email and any attachments are
>> confidential and may also be privileged. If you are not the intended
>> recipient, please notify the sender immediately and do not disclose the
>> contents to any other person, use it for any purpose, or store or copy
>> the information in any medium.  Thank you.
>>
>>
>>
> 
> ---
> ******************************************************************
> *  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
> *  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
> ******************************************************************
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3303 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070619/f5829f8e/attachment.bin 

[U-Boot-Users] New architecture -- TI DaVinci ARM

[ksi at koi8.net]

On Tue, 19 Jun 2007, Philip Balister wrote:

> I am also very interested in this. I have started hacking at supporting
> the 
> Lyrtech SFF SDR board, and trying to do so in a way the patches can be 
> accepted. (I am trying to figure out git and the coding standards).
>
> My work is based of the TI work (I think, the patch came via the
> internet) 
> and I have looked at Sergey's patch, although I think he needs to rework
> the 
> multiple board support.

I can rework anything and I'm thinking about making a davinci tree with
separate board subdirs but I don't want to waste my time redoing that thing
again and again. I would like to patch anything that is in the git tree.

> I would like to see us get some stuff moving into the mainline git so we
> can 
> build some structure for people to work with. I am really thrashing
> about 
> trying to get NAND support going. I know people have solved this
> problem, but 
> I can't see the right way to go.

As a matter of fact that my patch works just fine on different boards with
small and large page NAND devices. That's what we are using now without any
problems. Sure it works on DV-EVM... Please let me know what problems do you
have with NAND and I'll probably be able to help you...

I do also have the initial bootloader that works on serial port and allows
to load user app in DDR2, run it, write itself in NAND to act as an initial
NAND bootloader that loads user app (e.g. U-Boot) and provides for simple
command line debugging. That is also, IMHO, belongs to U-Boot, probably in a
separate subdir or whatever. There is lot of those that used on differnt
platforms and I think it would be really nice to have those in U-Boot tree
to be able to bring up a new board from a virgin state without wasting time
writing one...

> The davinci people really need to get this stuff flowing into git.
>
> Philip
>
> ksi at koi8.net wrote:
>> On Tue, 8 May 2007, Peter Pearse wrote:
>> 
>> Sorry for bothering, is there any news on that DaVinci support? I'm
> working
>> on it and I have some new boards added and other changes so I would
> like to
>> do smaller patches against the git tree rather than regenerating the
> big
>> patch every time...
>> 
>>> Sergey
>>>
>>> 	Apologies - you fooled me with the "New Architecture".
>>> I did a quick google & found the TMS320DM6443 was a DSP, so assumed
> it
>>> would be a new DSP architecture,
>>> rather than being part of arm.
>>> 
>>> I don't always know where ARM cores have been used - it helps if the
>>> email subject mentions ARM.
>>> 
>>> I'll add your patch to my list.
>>> 
>>> Peter

[dd]

---
******************************************************************
*  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
*  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
******************************************************************

[U-Boot-Users] New architecture -- TI DaVinci

[ksi at koi8.net]

On Tue, 8 May 2007, Peter Pearse wrote:

Sorry for bothering, is there any news on that DaVinci support? I'm working
on it and I have some new boards added and other changes so I would like to
do smaller patches against the git tree rather than regenerating the big
patch every time...

I also fixed the problem with Large Page NAND devices where U-Boot hang
after "NAND: xxx MiB" so everything works now.

This should be propagated to the main tree in order to make necessary
patches against it.

Or is it already all obsolete in the light of new shiny U-Boot with new
CONFIG_* options and I have to redo everything from scratch?

> Sergey
>
> 	Apologies - you fooled me with the "New Architecture".
> I did a quick google & found the TMS320DM6443 was a DSP, so assumed it
> would be a new DSP architecture,
> rather than being part of arm.
>
> I don't always know where ARM cores have been used - it helps if the
> email subject mentions ARM.
>
> I'll add your patch to my list.
>
> Peter
>
> -- 
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended
> recipient, please notify the sender immediately and do not disclose the
> contents to any other person, use it for any purpose, or store or copy
> the information in any medium.  Thank you.
>
>
>

---
******************************************************************
*  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
*  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
******************************************************************

[U-Boot-Users] New architecture -- TI DaVinci

[Peter Pearse]

I bottom post 

> -----Original Message-----
> From: ksi at koi8.net [mailto:ksi at koi8.net] 
> Sent: 17 July 2007 20:49
> To: Peter Pearse
> Cc: Stefan Roese; u-boot-users at lists.sourceforge.net
> Subject: Re: New architecture -- TI DaVinci
> 
> On Tue, 8 May 2007, Peter Pearse wrote:
> 
> Sorry for bothering, is there any news on that DaVinci 
> support? I'm working on it and I have some new boards added 
> and other changes so I would like to do smaller patches 
> against the git tree rather than regenerating the big patch 
> every time...
> 
> I also fixed the problem with Large Page NAND devices where 
> U-Boot hang after "NAND: xxx MiB" so everything works now.
> 
> This should be propagated to the main tree in order to make 
> necessary patches against it.
> 
> Or is it already all obsolete in the light of new shiny 
> U-Boot with new
> CONFIG_* options and I have to redo everything from scratch?
> 
> > Sergey
> >
> > 	Apologies - you fooled me with the "New Architecture".
> > I did a quick google & found the TMS320DM6443 was a DSP, so 
> assumed it 
> > would be a new DSP architecture, rather than being part of arm.
> >
> > I don't always know where ARM cores have been used - it 
> helps if the 
> > email subject mentions ARM.
> >
> > I'll add your patch to my list.
> >
> > Peter
> >
> > --
> > IMPORTANT NOTICE: The contents of this email and any 
> attachments are 
> > confidential and may also be privileged. If you are not the 
> intended 
> > recipient, please notify the sender immediately and do not disclose 
> > the contents to any other person, use it for any purpose, 
> or store or 
> > copy the information in any medium.  Thank you.
> >
> >
> >
> 
> ---
> ******************************************************************
> *  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
> *  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
> ******************************************************************
> 
Sergey

	Currently working on a software release.
I hope to get some time for U-Boot next week....

Peter 

[U-Boot-Users] New architecture -- TI DaVinci

[Stefan Roese]

Hi Sergey,

On Tuesday 17 July 2007, ksi at koi8.net wrote:
> Sorry for bothering, is there any news on that DaVinci support? I'm working
> on it and I have some new boards added and other changes so I would like to
> do smaller patches against the git tree rather than regenerating the big
> patch every time...
>
> I also fixed the problem with Large Page NAND devices where U-Boot hang
> after "NAND: xxx MiB" so everything works now.
>
> This should be propagated to the main tree in order to make necessary
> patches against it.

Please post this NAND related patch (and other non DaVince related fixes too) 
to the list. I'll try to review and apply it quickly. Thanks.

> Or is it already all obsolete in the light of new shiny U-Boot with new
> CONFIG_* options and I have to redo everything from scratch?

No, please continue with the current U-Boot repository for now. The "new" 
U-Boot version is, as far as I understand, not production ready yet.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot-Users] New architecture -- TI DaVinci

[ksi at koi8.net]

On Wed, 18 Jul 2007, Peter Pearse wrote:

OK, thanks. I do really hope it'll make it into the main tree...

> I bottom post
>
>> -----Original Message-----
>> From: ksi at koi8.net [mailto:ksi at koi8.net]
>> Sent: 17 July 2007 20:49
>> To: Peter Pearse
>> Cc: Stefan Roese; u-boot-users at lists.sourceforge.net
>> Subject: Re: New architecture -- TI DaVinci
>>
>> On Tue, 8 May 2007, Peter Pearse wrote:
>>
>> Sorry for bothering, is there any news on that DaVinci
>> support? I'm working on it and I have some new boards added
>> and other changes so I would like to do smaller patches
>> against the git tree rather than regenerating the big patch
>> every time...
>>
>> I also fixed the problem with Large Page NAND devices where
>> U-Boot hang after "NAND: xxx MiB" so everything works now.
>>
>> This should be propagated to the main tree in order to make
>> necessary patches against it.
>>
>> Or is it already all obsolete in the light of new shiny
>> U-Boot with new
>> CONFIG_* options and I have to redo everything from scratch?
>>
>>> Sergey
>>>
>>> 	Apologies - you fooled me with the "New Architecture".
>>> I did a quick google & found the TMS320DM6443 was a DSP, so
>> assumed it
>>> would be a new DSP architecture, rather than being part of arm.
>>>
>>> I don't always know where ARM cores have been used - it
>> helps if the
>>> email subject mentions ARM.
>>>
>>> I'll add your patch to my list.
>>>
>>> Peter
>>>
>>> --
>>> IMPORTANT NOTICE: The contents of this email and any
>> attachments are
>>> confidential and may also be privileged. If you are not the
>> intended
>>> recipient, please notify the sender immediately and do not disclose
>>> the contents to any other person, use it for any purpose,
>> or store or
>>> copy the information in any medium.  Thank you.
>>>
>>>
>>>
>>
>> ---
>> ******************************************************************
>> *  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
>> *  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
>> ******************************************************************
>>
> Sergey
>
> 	Currently working on a software release.
> I hope to get some time for U-Boot next week....
>
> Peter
>
>

---
******************************************************************
*  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
*  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
******************************************************************