From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Mon, 6 Aug 2007 12:12:50 +0200 Subject: [U-Boot-Users] NAND "bad block" support In-Reply-To: References: Message-ID: <200708061212.50940.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sunday 05 August 2007, Shai Lifshitz wrote: > how does the U-Boot solve the "bad block" problem in the NAND flash > memory? Yes, U-Boot NAND driver is bad block aware (would be worthless without). > 1) does the U-Boot have support to 'bad-block table'? If it does, then how > do I activate it? No, the bad-block-table is not supported right now. Would be nice extension though. > 2) does the U-Boot work with JFFS2 (that handles 'bad blocks')? Yes. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================