[U-Boot-Users] Cleanup output of MPC83xx boards

[Stefan Roese <sr@denx.de>]

Hi Kim,

On Monday 13 August 2007, Kim Phillips wrote:
> the problem is some boards spit out other memory diagnostic
> information, such as:
>
> ---
>    DDR DIMM: data bus width is 64 bit without ECC
>    DDRC ECC mode: OFF
>    SDRAM on Local Bus is NOT available!
> ---
>
> I can abbreviate the above to have the entire DRAM line show something
> like "DRAM: 64-bit, ECC off, 256MB\n".  Let me know if you have
> objections.

On some 4xx boards I generate this output:

DRAM:  512 MB (ECC not enabled, 533 MHz, CL4)

It's using the function board_add_ram_info() enabled via the 
CONFIG_ADD_RAM_INFO option. Perhaps we could define this function as weak 
too, to loose some more #ifdef's.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================