[U-Boot-Users] lite5200b board - Serial download of image

[Wolfgang Denk <wd@denx.de>]

Heln message <66E8AEE9980BB44CA5FCAD39EBA56AC60214AA3B@CHN-HCLT-EVS02.HCLT.CORP.HCL.IN> you wrote:
> 
> I tried to download image through serial via Kermit 
> Using commands:  
> send /bin /tftpboot/uImage  at Kermit prompt
> &          
> Uboot command:           loadb address 
> 
> Retransmission count exceeds in Kermit and transmission of packet fails.
> And, on u-boot side only 0 Bytes are received.
> What might be the issue?

You may have forgotten to set the correct parameters in kermit. See
the example .kermrc file in the U-Boot manual at
http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3.

> The contents of this e-mail and any attachment(s) are confidential and>  intended for the named recipient(s) only.
> It shall not attach any liability on the originator or HCL or its>  affiliates. Any views or opinions presented in 
> this email are solely those of the author and may not necessarily reflect>  the opinions of HCL or its affiliates.
...

Please omit this when posting to public mailing lists,


> ------_=_NextPart_001_01C7DFCC.3F3A3C3F
> Content-Type: text/html;
> 	charset="us-ascii"
> Content-Transfer-Encoding: quoted-printable

And NEVER post HTML here!

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The good Christian should beware of mathematicians and all those who
make empty prophecies. The danger already exists that  mathematicians
have  made a covenant with the devil to darken the spirit and confine
man in the bonds of Hell."                          - Saint Augustine