[U-Boot-Users] [MPC82xx] Fixes for MPC8272

[U-Boot-Users] [MPC82xx] Fixes for MPC8272

[Wolfgang Denk]

The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
  Wolfgang Denk (1):
        Cleanup compiler warnings, update CHANGELOG

are found in the git repository at:

  git://www.denx.de/git/u-boot-mpc82xx.git

Heiko Schocher (1):
      [MPC826x] update defines in include/mpc8260.h for the MPC8272 family

 include/mpc8260.h |   90 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 89 insertions(+), 1 deletions(-)


Please help testing this code. If there are no complaints, it will be
merged into the master repo in aboutr 3 weeks from now.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If God had wanted us to use the metric system, Jesus would have  had
10 apostles."

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Stefan Roese]

The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
  Wolfgang Denk (1):
        Cleanup compiler warnings, update CHANGELOG

are found in the git repository at:

  git://www.denx.de/git/u-boot-nand-flash.git

Stefan Roese (2):
      Remove BOARDLIBS usage completely
      Merge with git://www.denx.de/git/u-boot.git

 Makefile                       |    4 +++-
 board/ixdp425/config.mk        |    3 ---
 board/prodrive/pdnb3/config.mk |    3 ---
 cpu/ixp/npe/Makefile           |    2 +-
 doc/README.nand                |    7 +------
 include/configs/delta.h        |    1 -
 include/configs/zylonite.h     |    1 -
 7 files changed, 5 insertions(+), 16 deletions(-)

[U-Boot-Users] Please pull git://www.denx.de/git/u-boot-testing.git

[Stefan Roese]

The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
  Wolfgang Denk (1):
        Cleanup compiler warnings, update CHANGELOG

are found in the git repository at:

  git://www.denx.de/git/u-boot-testing.git

Jeffrey Mann (1):
      [patch] setenv(...) can delete environmentalvariables

Mike Frysinger (1):
      [patch] use unsigned char in smc91111 driver for mac

Sergei Shtylyov (1):
      Avoid assigning PCI resources from zero address

Stefan Roese (2):
      Merge with git://www.denx.de/git/u-boot.git
      Fix file mode

 common/cmd_nvedit.c |    5 ++++-
 drivers/pci_auto.c  |    7 ++++++-
 drivers/smc91111.c  |    8 ++++----
 3 files changed, 14 insertions(+), 6 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Wolfgang Denk]

In message <200704231516.04707.sr@denx.de> you wrote:
> The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
>   Wolfgang Denk (1):
>         Cleanup compiler warnings, update CHANGELOG
> 
> are found in the git repository at:
> 
>   git://www.denx.de/git/u-boot-nand-flash.git
> 
> Stefan Roese (2):
>       Remove BOARDLIBS usage completely
>       Merge with git://www.denx.de/git/u-boot.git

Merged, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,    CEO: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It would be illogical to kill without reason
	-- Spock, "Journey to Babel", stardate 3842.4

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562:
  Timur Tabi (1):
        5xxx: write MAC address to mac-address and local-mac-address

are found in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git

Jeffrey Mann (2):
      ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
      Run new sequoia boards with an EBC speed of 83MHz

Stefan Roese (2):
      ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
      ppc4xx: Add mtcpr/mfcpr access macros

 board/amcc/sequoia/sequoia.c |   10 ++++++++--
 include/configs/sequoia.h    |    2 +-
 include/ppc440.h             |   20 +++++++++++++++++---
 lib_ppc/board.c              |    4 +++-
 4 files changed, 29 insertions(+), 7 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 70124c2602ae2d4c5d3dba05b482d91548242de8:
  Stefano Babic (1):
        Fix compile problem cause my Microblaze merge

are found in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git

Jeffrey Mann (2):
      ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
      Run new sequoia boards with an EBC speed of 83MHz

Stefan Roese (9):
      ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
      ppc4xx: Add mtcpr/mfcpr access macros
      Merge with git://www.denx.de/git/u-boot.git
      ppc4xx: Fix problem in 405EZ OCM initialization
      ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
      ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
      ppc4xx: Update AMCC Acadia support for board revision 1.1
      ppc4xx: Fix small 405EZ OCM initilization bug in start.S
      Merge with /home/stefan/git/u-boot/acadia-nand

 board/amcc/acadia/acadia.c   |    9 ++++++++-
 board/amcc/sequoia/sequoia.c |   10 ++++++++--
 cpu/ppc4xx/ndfc.c            |    8 ++++----
 cpu/ppc4xx/start.S           |    2 +-
 include/configs/acadia.h     |   27 +++++++++------------------
 include/configs/sequoia.h    |    2 +-
 include/ppc405.h             |    8 ++++----
 include/ppc440.h             |   20 +++++++++++++++++---
 lib_ppc/board.c              |    4 +++-
 9 files changed, 55 insertions(+), 35 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 19bf91f9628f80a55d4f171df71041574882b3d6:
  Wolfgang Denk (1):
        Merge with /home/tur/git/u-boot#motionpro

are found in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git

Stefan Roese (13):
      ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
      ppc4xx: Change Luan config file to support ECC
      ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
      NAND: Update nand_ecc.c to latest Linux version
      NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
      ppc4xx: Update in_be32() functions and friends to latest Linux version
      ppc4xx: Prepare Bamboo port for NAND booting support
      NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
      ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
      ppc4xx: Update Sequoia NAND booting support with ECC
      ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
      Merge with /home/stefan/git/u-boot/bamboo-nand
      ppc4xx: Add missing file for Bamboo NAND booting support

 MAKEALL                               |   30 ++--
 Makefile                              |    9 +
 board/amcc/bamboo/Makefile            |    4 +-
 board/amcc/bamboo/bamboo.c            |   29 ++-
 board/amcc/bamboo/config.mk           |    6 +-
 board/amcc/bamboo/flash.c             |    6 +-
 board/amcc/bamboo/init.S              |  183 +++++++++---------
 board/amcc/bamboo/u-boot-nand.lds     |  137 +++++++++++++
 board/amcc/sequoia/sdram.c            |    4 +
 board/amcc/sequoia/sequoia.c          |    6 -
 cpu/ppc4xx/44x_spd_ddr.c              |  341 ++++++++++++++++-----------------
 cpu/ppc4xx/44x_spd_ddr2.c             |    7 +-
 cpu/ppc4xx/ndfc.c                     |   74 +++++--
 cpu/ppc4xx/start.S                    |  221 +++++++++++++---------
 drivers/nand/nand_ecc.c               |  228 +++++++++-------------
 include/asm-ppc/io.h                  |   89 ++++++----
 include/configs/bamboo.h              |   88 ++++++++--
 include/configs/luan.h                |    3 +-
 include/configs/sequoia.h             |   13 +-
 nand_spl/board/amcc/bamboo/Makefile   |  100 ++++++++++
 nand_spl/board/amcc/bamboo/config.mk  |   49 +++++
 nand_spl/board/amcc/bamboo/sdram.c    |   92 +++++++++
 nand_spl/board/amcc/bamboo/u-boot.lds |   65 +++++++
 nand_spl/board/amcc/sequoia/Makefile  |    9 +-
 nand_spl/nand_boot.c                  |   95 ++++++----
 25 files changed, 1243 insertions(+), 645 deletions(-)
 create mode 100644 board/amcc/bamboo/u-boot-nand.lds
 create mode 100644 nand_spl/board/amcc/bamboo/Makefile
 create mode 100644 nand_spl/board/amcc/bamboo/config.mk
 create mode 100644 nand_spl/board/amcc/bamboo/sdram.c
 create mode 100644 nand_spl/board/amcc/bamboo/u-boot.lds

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit c0c292b2852a12e9d93e99b3aaf5b0dac5f36fdc:
  Wolfgang Denk (1):
        Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx

are found in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git

Stefan Roese (2):
      ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
      Merge with /home/stefan/git/u-boot/acadia-nand-boot

 MAKEALL                               |   33 ++++----
 Makefile                              |    9 ++
 board/amcc/acadia/Makefile            |    2 +-
 board/amcc/acadia/acadia.c            |   10 ++-
 board/amcc/acadia/cmd_acadia.c        |  101 ++++++++++++++++++++++
 board/amcc/acadia/config.mk           |    6 ++
 board/amcc/acadia/memory.c            |   11 ++-
 board/amcc/acadia/u-boot-nand.lds     |  137 +++++++++++++++++++++++++++++
 cpu/ppc4xx/start.S                    |   72 ++++++++++++----
 include/configs/acadia.h              |  152 ++++++++++++++++++++++++++-------
 include/ppc405.h                      |    8 ++
 nand_spl/board/amcc/acadia/Makefile   |  104 ++++++++++++++++++++++
 nand_spl/board/amcc/acadia/config.mk  |   47 ++++++++++
 nand_spl/board/amcc/acadia/u-boot.lds |   63 ++++++++++++++
 14 files changed, 685 insertions(+), 70 deletions(-)
 create mode 100644 board/amcc/acadia/cmd_acadia.c
 create mode 100644 board/amcc/acadia/u-boot-nand.lds
 create mode 100644 nand_spl/board/amcc/acadia/Makefile
 create mode 100644 nand_spl/board/amcc/acadia/config.mk
 create mode 100644 nand_spl/board/amcc/acadia/u-boot.lds

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7:
  Wolfgang Denk (1):
        Coding Style cleanup; generate new CHANGELOG file.

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Beno?t Monin (1):
      fix gpio setting when using CFG_440_GPIO_TABLE

Grzegorz Bernacki (1):
      ppc4xx: Clean up 440 exceptions handling

Stefan Roese (8):
      [ppc4xx] Extend program_tlb() with virtual & physical addresses
      [ppc4xx] Extend 44x GPIO setup with default output state
      [ppc4xx] Add initial lwmon5 board support
      Merge with /home/stefan/git/u-boot/denx-440-exceptions
      [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
      [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
      [ppc4xx] Fix problem with NAND booting on AMCC Acadia
      ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board

 MAINTAINERS                           |    1 +
 MAKEALL                               |   18 +-
 Makefile                              |    3 +
 board/amcc/acadia/Makefile            |    2 +-
 board/amcc/acadia/acadia.c            |    2 +
 board/amcc/acadia/memory.c            |   11 +
 board/amcc/acadia/{cpr.c => pll.c}    |    0 
 board/amcc/sequoia/Makefile           |    2 +-
 board/amcc/sequoia/cmd_sequoia.c      |  111 ++++++
 board/lwmon5/Makefile                 |   51 +++
 board/lwmon5/config.mk                |   39 +++
 board/lwmon5/init.S                   |   90 +++++
 board/lwmon5/lwmon5.c                 |  464 +++++++++++++++++++++++++
 board/lwmon5/sdram.c                  |  598 +++++++++++++++++++++++++++++++++
 board/lwmon5/sdram.h                  |  505 ++++++++++++++++++++++++++++
 board/lwmon5/u-boot.lds               |  145 ++++++++
 cpu/ppc4xx/44x_spd_ddr.c              |    4 +-
 cpu/ppc4xx/44x_spd_ddr2.c             |    4 +-
 cpu/ppc4xx/config.mk                  |   10 +-
 cpu/ppc4xx/gpio.c                     |   42 +++-
 cpu/ppc4xx/start.S                    |  331 +++++++++---------
 cpu/ppc4xx/tlb.c                      |   77 +++--
 cpu/ppc4xx/traps.c                    |  107 ++++---
 include/asm-ppc/gpio.h                |    8 +-
 include/asm-ppc/processor.h           |   15 +-
 include/configs/CPCI440.h             |    1 +
 include/configs/KAREF.h               |    1 +
 include/configs/METROBOX.h            |    1 +
 include/configs/acadia.h              |    4 +-
 include/configs/alpr.h                |    1 +
 include/configs/bamboo.h              |    1 +
 include/configs/ebony.h               |    1 +
 include/configs/katmai.h              |    2 +-
 include/configs/lwmon5.h              |  438 ++++++++++++++++++++++++
 include/configs/ocotea.h              |    1 +
 include/configs/p3p440.h              |    1 +
 include/configs/pcs440ep.h            |  131 ++++----
 include/configs/sequoia.h             |    1 +
 include/configs/taishan.h             |    1 +
 include/configs/yosemite.h            |    1 +
 include/ppc405.h                      |    9 +
 include/ppc440.h                      |   10 +-
 include/ppc4xx.h                      |    1 +
 include/ppc_asm.tmpl                  |   96 +++----
 nand_spl/board/amcc/acadia/Makefile   |   14 +-
 nand_spl/board/amcc/acadia/config.mk  |    4 +-
 nand_spl/board/amcc/acadia/u-boot.lds |    2 +-
 47 files changed, 2968 insertions(+), 394 deletions(-)
 rename board/amcc/acadia/{cpr.c => pll.c} (100%)
 create mode 100644 board/amcc/sequoia/cmd_sequoia.c
 create mode 100644 board/lwmon5/Makefile
 create mode 100644 board/lwmon5/config.mk
 create mode 100644 board/lwmon5/init.S
 create mode 100644 board/lwmon5/lwmon5.c
 create mode 100644 board/lwmon5/sdram.c
 create mode 100644 board/lwmon5/sdram.h
 create mode 100644 board/lwmon5/u-boot.lds
 create mode 100644 include/configs/lwmon5.h

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200706191749.55031.sr@denx.de> you wrote:
> The following changes since commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7:
>   Wolfgang Denk (1):
>         Coding Style cleanup; generate new CHANGELOG file.
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master

Merged. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Any sufficiently advanced technology is indistinguishable from magic.
                                                   - Arthur C. Clarke

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Kim Phillips]

On Tue, 19 Jun 2007 17:49:54 +0200
Stefan Roese <sr@denx.de> wrote:

> Grzegorz Bernacki (1):
>       ppc4xx: Clean up 440 exceptions handling
> 

Emil brought to my attention that this commit breaks all powerpc's
except 4xx, like this:

start.S: Assembler messages:
start.S:266: Error: Unrecognized opcode: `exception_prolog'
start.S:285: Error: Unrecognized opcode: `exception_prolog'
make[1]: *** [start.o] Error 1

let us know how you would like to proceed.

Kim

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

Hi Kim,

On Friday 22 June 2007, Kim Phillips wrote:
> > Grzegorz Bernacki (1):
> >       ppc4xx: Clean up 440 exceptions handling
>
> Emil brought to my attention that this commit breaks all powerpc's
> except 4xx, like this:
>
> start.S: Assembler messages:
> start.S:266: Error: Unrecognized opcode: `exception_prolog'
> start.S:285: Error: Unrecognized opcode: `exception_prolog'
> make[1]: *** [start.o] Error 1
>
> let us know how you would like to proceed.

I'm very sorry for this. We're investigating right now, how to best handle 
this. I'll let you know very soon.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

Hi Kim,

On Friday 22 June 2007, Stefan Roese wrote:
> > Emil brought to my attention that this commit breaks all powerpc's
> > except 4xx, like this:
> >
> > start.S: Assembler messages:
> > start.S:266: Error: Unrecognized opcode: `exception_prolog'
> > start.S:285: Error: Unrecognized opcode: `exception_prolog'
> > make[1]: *** [start.o] Error 1
> >
> > let us know how you would like to proceed.
>
> I'm very sorry for this. We're investigating right now, how to best handle
> this. I'll let you know very soon.

Wolfgang committed a fix for this a few minutes ago:

http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=02032e8f14751a1a751b09240a4f1cf9f8a2077f

Please give it a try and let me know if you have any comments.

Again, sorry for the breakage.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Kim Phillips]

On Fri, 22 Jun 2007 16:18:32 +0200
Stefan Roese <sr@denx.de> wrote:

> 
> Please give it a try and let me know if you have any comments.

builds ok now.

Thanks,

Kim

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f:
  Rafal Jaworowski (1):
        [ppc] Fix build breakage for all non-4xx PowerPC variants.

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Stefan Roese (1):
      ppc4xx: Fix problem with extended program_tlb() funtion

 cpu/ppc4xx/tlb.c |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

[U-Boot-Users] [PATCH] ppc7xx: Update CPCI750 board

[Stefan Roese]

This small CPCI750 update extends the board specific command
"show_config" to display the Marvell strapping registers and
extends the PCI IDE controller.

Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>

---
commit c9cfe580f6376de734a58707448914c8f7815043
tree 2731456a3e94d72412abe3f5881943dded1dd579
parent 83b4cfa3d629dff0264366263c5e94d9a50ad80b
author Reinhard Arlt <reinhard.arlt@esd-electronics.com> Fri, 22 Jun 2007 17:28:42 +0200
committer Stefan Roese <sr@denx.de> Fri, 22 Jun 2007 17:28:42 +0200

 board/esd/cpci750/cpci750.c    |   89 ++++++++++++++++++++++++++++++++++++++--
 board/esd/cpci750/ide.c        |    2 +
 board/esd/cpci750/sdram_init.c |    2 -
 3 files changed, 88 insertions(+), 5 deletions(-)

diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 17e3568..298aa6a 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -55,6 +55,71 @@
 #define DP(x)
 #endif
 
+static char show_config_tab[][15] = {{"PCI0DLL_2     "},  /* 31 */
+				     {"PCI0DLL_1     "},  /* 30 */
+				     {"PCI0DLL_0     "},  /* 29 */
+				     {"PCI1DLL_2     "},  /* 28 */
+				     {"PCI1DLL_1     "},  /* 27 */
+				     {"PCI1DLL_0     "},  /* 26 */
+				     {"BbEP2En       "},  /* 25 */
+				     {"SDRAMRdDataDel"},  /* 24 */
+				     {"SDRAMRdDel    "},  /* 23 */
+				     {"SDRAMSync     "},  /* 22 */
+				     {"SDRAMPipeSel_1"},  /* 21 */
+				     {"SDRAMPipeSel_0"},  /* 20 */
+				     {"SDRAMAddDel   "},  /* 19 */
+				     {"SDRAMClkSel   "},  /* 18 */
+				     {"Reserved(1!)  "},  /* 17 */
+				     {"PCIRty        "},  /* 16 */
+				     {"BootCSWidth_1 "},  /* 15 */
+				     {"BootCSWidth_0 "},  /* 14 */
+				     {"PCI1PadsCal   "},  /* 13 */
+				     {"PCI0PadsCal   "},  /* 12 */
+				     {"MultiMVId_1   "},  /* 11 */
+				     {"MultiMVId_0   "},  /* 10 */
+				     {"MultiGTEn     "},  /* 09 */
+				     {"Int60xArb     "},  /* 08 */
+				     {"CPUBusConfig_1"},  /* 07 */
+				     {"CPUBusConfig_0"},  /* 06 */
+				     {"DefIntSpc     "},  /* 05 */
+				     {0               },  /* 04 */
+				     {"SROMAdd_1     "},  /* 03 */
+				     {"SROMAdd_0     "},  /* 02 */
+				     {"DRAMPadCal    "},  /* 01 */
+				     {"SInitEn       "},  /* 00 */
+				     {0               },  /* 31 */
+				     {0               },  /* 30 */
+				     {0               },  /* 29 */
+				     {0               },  /* 28 */
+				     {0               },  /* 27 */
+				     {0               },  /* 26 */
+				     {0               },  /* 25 */
+				     {0               },  /* 24 */
+				     {0               },  /* 23 */
+				     {0               },  /* 22 */
+				     {"JTAGCalBy     "},  /* 21 */
+				     {"GB2Sel        "},  /* 20 */
+				     {"GB1Sel        "},  /* 19 */
+				     {"DRAMPLL_MDiv_5"},  /* 18 */
+				     {"DRAMPLL_MDiv_4"},  /* 17 */
+				     {"DRAMPLL_MDiv_3"},  /* 16 */
+				     {"DRAMPLL_MDiv_2"},  /* 15 */
+				     {"DRAMPLL_MDiv_1"},  /* 14 */
+				     {"DRAMPLL_MDiv_0"},  /* 13 */
+				     {"GB0Sel        "},  /* 12 */
+				     {"DRAMPLLPU     "},  /* 11 */
+				     {"DRAMPLL_HIKVCO"},  /* 10 */
+				     {"DRAMPLLNP     "},  /* 09 */
+				     {"DRAMPLL_NDiv_7"},  /* 08 */
+				     {"DRAMPLL_NDiv_6"},  /* 07 */
+				     {"CPUPadCal     "},  /* 06 */
+				     {"DRAMPLL_NDiv_5"},  /* 05 */
+				     {"DRAMPLL_NDiv_4"},  /* 04 */
+				     {"DRAMPLL_NDiv_3"},  /* 03 */
+				     {"DRAMPLL_NDiv_2"},  /* 02 */
+				     {"DRAMPLL_NDiv_1"},  /* 01 */
+				     {"DRAMPLL_NDiv_0"}}; /* 00 */
+
 extern void flush_data_cache (void);
 extern void invalidate_l1_instruction_cache (void);
 extern flash_info_t flash_info[];
@@ -901,21 +966,37 @@ void board_prebootm_init ()
 	dcache_disable ();
 }
 
-
-int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned int reset_sample_low;
 	unsigned int reset_sample_high;
+	unsigned int l, l1, l2;
 
 	GT_REG_READ(0x3c4, &reset_sample_low);
 	GT_REG_READ(0x3d4, &reset_sample_high);
 	printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high);
 
+	l2 = 0;
+	for (l=0; l<63; l++) {
+		if (show_config_tab[l][0] != 0) {
+			printf("%14s:%1x ", show_config_tab[l],
+			       ((reset_sample_low >> (31 - (l & 0x1f)))) & 0x01);
+			l2++;
+			if ((l2 % 4) == 0)
+				printf("\n");
+		} else {
+			l1++;
+		}
+		if (l == 32)
+			reset_sample_low = reset_sample_high;
+	}
+	printf("\n");
+
 	return(0);
 }
 
 U_BOOT_CMD(
-	show_cfg,	1,	1,	do_show_cfg,
-	"show_cfg- Show Marvell strapping register\n",
+	show_config,	1,	1,	do_show_config,
+	"show_config - Show Marvell strapping register\n",
 	"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
 	);
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
index bea99ce..2b8fe6b 100644
--- a/board/esd/cpci750/ide.c
+++ b/board/esd/cpci750/ide.c
@@ -43,6 +43,8 @@ int ide_preinit (void)
 		ide_bus_offset[l] = -ATA_STATUS;
 	}
 	devbusfn = pci_find_device (0x1103, 0x0004, 0);
+	if (devbusfn == -1)
+	        devbusfn = pci_find_device (0x1095, 0x3114, 0);
 	if (devbusfn != -1) {
 		status = 0;
 
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index c094755..78d1880 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -1252,7 +1252,7 @@ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
 /* sets up the GT properly with information passed in */
 int setup_sdram (AUX_MEM_DIMM_INFO * info)
 {
-	ulong tmp, check;
+	ulong tmp;
 	ulong tmp_sdram_mode = 0;	/* 0x141c */
 	ulong tmp_dunit_control_low = 0;	/* 0x1404 */
 	int i;

[U-Boot-Users] [PATCH] ppc7xx: Update CPCI750 board

[Wolfgang Denk]

In message <200706221732.28457.sr@denx.de> you wrote:
> This small CPCI750 update extends the board specific command
> "show_config" to display the Marvell strapping registers and
> extends the PCI IDE controller.
> 
> Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
> Signed-off-by: Stefan Roese <sr@denx.de>

Applied. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I'm not a god, I was misquoted."                 - Lister, Red Dwarf

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 53629f439cc9daba166812749d2cf3102aca7aac:
  Stefan Roese (1):
        Merge with git://www.denx.de/git/u-boot.git

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git

Anatolij Gustschin (1):
      ppc4xx: lwmon5: Update Lime initialization

Eugene OBrien (1):
      ppc4xx: Update AMCC Bamboo 440EP support

Grzegorz Bernacki (1):
      [ppc440SPe] Graceful recovery from machine check during PCIe configuration

Matthias Fuchs (1):
      new FPGA image for PLU405 board

Pavel Kolesnikov (1):
      POST: Add ECC POST for the lwmon5 board

Rafal Jaworowski (1):
      [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A

Stefan Roese (13):
      ppc4xx: Change receive buffer handling in the 4xx emac driver
      ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
      ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
      ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
      ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
      ppc4xx: Code cleanup
      Merge with git://www.denx.de/git/u-boot.git
      ppc4xx: Fix bug with default GPIO output value
      ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
      ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
      ppc4xx: Only print ECC related info when the error bis are set
      ppc4xx: Update 440EPx lwmon5 board support
      ppc4xx: Code cleanup

 CHANGELOG                         |   59 +
 MAKEALL                           |   12 +-
 Makefile                          |   10 +-
 board/amcc/bamboo/bamboo.c        |  321 ++++--
 board/amcc/bamboo/init.S          |    3 +-
 board/amcc/bamboo/u-boot.lds      |    2 -
 board/amcc/common/flash.c         |   18 +-
 board/amcc/luan/luan.c            |    7 +
 board/amcc/yucca/yucca.c          |   34 +
 board/esd/plu405/fpgadata.c       | 2339 +++++++++++++++++++------------------
 board/lwmon5/lwmon5.c             |   89 ++-
 board/lwmon5/sdram.c              |   38 +-
 cpu/ppc4xx/440spe_pcie.c          |   47 +-
 cpu/ppc4xx/440spe_pcie.h          |   19 +-
 cpu/ppc4xx/44x_spd_ddr.c          |    5 +-
 cpu/ppc4xx/44x_spd_ddr2.c         |   58 +-
 cpu/ppc4xx/4xx_enet.c             |    8 +-
 cpu/ppc4xx/gpio.c                 |    4 +-
 cpu/ppc4xx/tlb.c                  |   62 +-
 cpu/ppc4xx/traps.c                |   49 +-
 include/asm-ppc/mmu.h             |    3 +
 include/common.h                  |    8 +-
 include/configs/bamboo.h          |    2 +
 include/configs/luan.h            |    1 -
 include/configs/lwmon5.h          |   33 +-
 include/post.h                    |    1 +
 include/ppc440.h                  |   13 +
 lib_ppc/extable.c                 |    2 +-
 post/board/lwmon5/Makefile        |   29 +
 post/board/lwmon5/ecc.c           |  267 +++++
 post/cpu/ppc4xx/fpu.c             |    2 +-
 post/post.c                       |    8 +-
 post/tests.c                      |   13 +
 64 files changed, 3950 insertions(+), 1670 deletions(-)
 create mode 100644 post/board/lwmon5/Makefile
 create mode 100644 post/board/lwmon5/ecc.c

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 53629f439cc9daba166812749d2cf3102aca7aac:
  Stefan Roese (1):
        Merge with git://www.denx.de/git/u-boot.git

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git

Anatolij Gustschin (1):
      ppc4xx: lwmon5: Update Lime initialization

Eugene OBrien (1):
      ppc4xx: Update AMCC Bamboo 440EP support

Grzegorz Bernacki (1):
      [ppc440SPe] Graceful recovery from machine check during PCIe configuration

John Otken (1):
      ppc4xx: Add support for AMCC 405EP Taihu board

Matthias Fuchs (1):
      new FPGA image for PLU405 board

Niklaus Giger (8):
      Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
      Add PPC4xx-HCU4 and HCU5 boards: READMEs
      Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
      Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
      Add PPC4xx-HCU4 and HCU5 boards: make related
      Add PPC4xx-HCU4 and HCU5 boards: common files
      Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
      Add PPC4xx-HCU4 and HCU5 boards: HCU5 files

Pavel Kolesnikov (1):
      POST: Add ECC POST for the lwmon5 board

Rafal Jaworowski (2):
      [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A

Stefan Roese (24):
      ppc4xx: Change receive buffer handling in the 4xx emac driver
      ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
      ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
      ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
      ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
      ppc4xx: Code cleanup
      Merge with git://www.denx.de/git/u-boot.git
      ppc4xx: Fix bug with default GPIO output value
      ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
      ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
      ppc4xx: Only print ECC related info when the error bis are set
      ppc4xx: Update 440EPx lwmon5 board support
      ppc4xx: Code cleanup
      Merge with git://www.denx.de/git/u-boot.git
      ppc4xx: Update AMCC Bamboo README doc/README.bamboo
      ppc4xx: Update lwmon5 POST configuration
      Coding style cleanup
      ppc4xx: Fix problem in PLL clock calculation
      POST: Add ppc405 support to cache and UART POST
      POST: Add option for external ethernet loopback test
      ppc4xx: Add initial Zeus (PPC405EP) board support
      Merge with /home/stefan/git/u-boot/zeus
      Coding style cleanup
      POST: Fix merge problem

Yuri Tikhonov (1):
      POST: Add ppc4xx UART POST support without external uart clock (lwmon5)

 CHANGELOG                         |   59 +
 CREDITS                           |    5 +
 MAINTAINERS                       |    7 +
 MAKEALL                           |   33 +-
 Makefile                          |   26 +-
 board/amcc/bamboo/bamboo.c        |  321 ++++--
 board/amcc/bamboo/init.S          |    3 +-
 board/amcc/bamboo/u-boot.lds      |    2 -
 board/amcc/bubinga/bubinga.c      |   13 +-
 board/amcc/common/flash.c         |   18 +-
 board/amcc/luan/luan.c            |    7 +
 board/amcc/taihu/Makefile         |   49 +
 board/amcc/taihu/config.mk        |   24 +
 board/amcc/taihu/flash.c          | 1083 +++++++++++++++++
 board/amcc/taihu/lcd.c            |  257 ++++
 board/amcc/taihu/taihu.c          |  240 ++++
 board/amcc/taihu/u-boot.lds       |  150 +++
 board/amcc/taihu/update.c         |  132 +++
 board/amcc/yucca/yucca.c          |   34 +
 board/esd/plu405/fpgadata.c       | 2339 +++++++++++++++++++------------------
 board/lwmon5/lwmon5.c             |   89 ++-
 board/lwmon5/sdram.c              |   38 +-
 board/netstal/common/flash.c      |  528 +++++++++
 board/netstal/common/nm_bsp.c     |   41 +
 board/netstal/hcu4/Makefile       |   49 +
 board/netstal/hcu4/README.txt     |   59 +
 board/netstal/hcu4/config.mk      |   28 +
 board/netstal/hcu4/hcu4.c         |  403 +++++++
 board/netstal/hcu4/u-boot.lds     |  140 +++
 board/netstal/hcu5/Makefile       |   49 +
 board/netstal/hcu5/README.txt     |  174 +++
 board/netstal/hcu5/config.mk      |   30 +
 board/netstal/hcu5/hcu5.c         |  525 +++++++++
 board/netstal/hcu5/init.S         |   79 ++
 board/netstal/hcu5/sdram.c        |  302 +++++
 board/netstal/hcu5/u-boot.lds     |  144 +++
 board/zeus/Makefile               |   51 +
 board/zeus/config.mk              |   24 +
 board/zeus/u-boot.lds             |  133 +++
 board/zeus/update.c               |  105 ++
 board/zeus/zeus.c                 |  511 ++++++++
 common/soft_spi.c                 |    2 +
 cpu/ppc4xx/440spe_pcie.c          |   47 +-
 cpu/ppc4xx/440spe_pcie.h          |   19 +-
 cpu/ppc4xx/44x_spd_ddr.c          |    5 +-
 cpu/ppc4xx/44x_spd_ddr2.c         |   58 +-
 cpu/ppc4xx/4xx_enet.c             |    8 +-
 cpu/ppc4xx/gpio.c                 |    6 +-
 cpu/ppc4xx/sdram.c                |   32 +-
 cpu/ppc4xx/sdram.h                |    2 -
 cpu/ppc4xx/serial.c               |    9 +-
 cpu/ppc4xx/speed.c                |   33 +-
 cpu/ppc4xx/start.S                |   61 +-
 cpu/ppc4xx/tlb.c                  |   62 +-
 cpu/ppc4xx/traps.c                |   49 +-
 doc/README.bamboo                 |   62 +
 doc/README.zeus                   |   73 ++
 dtt/Makefile                      |    2 +-
 dtt/ds1775.c                      |  156 +++
 include/asm-ppc/mmu.h             |    3 +
 include/asm-ppc/processor.h       |    6 +
 include/common.h                  |    8 +-
 include/configs/bamboo.h          |    2 +
 include/configs/hcu4.h            |  341 ++++++
 include/configs/hcu5.h            |  388 ++++++
 include/configs/luan.h            |    1 -
 include/configs/lwmon5.h          |   50 +-
 include/configs/taihu.h           |  473 ++++++++
 include/configs/zeus.h            |  375 ++++++
 include/dtt.h                     |    8 +
 include/post.h                    |    1 +
 include/ppc405.h                  |   16 +
 include/ppc440.h                  |   13 +
 include/ppc_asm.tmpl              |    2 +-
 lib_ppc/extable.c                 |    2 +-
 net/eth.c                         |   14 +-
 post/board/lwmon5/Makefile        |   29 +
 post/board/lwmon5/ecc.c           |  267 +++++
 post/cpu/ppc4xx/cache.c           |   16 +-
 post/cpu/ppc4xx/cache_4xx.S       |   44 +
 post/cpu/ppc4xx/ether.c           |    9 +-
 post/cpu/ppc4xx/fpu.c             |    2 +-
 post/cpu/ppc4xx/uart.c            |  176 +++-
 post/post.c                       |    8 +-
 post/tests.c                      |   13 +
 115 files changed, 11556 insertions(+), 1741 deletions(-)
 create mode 100644 board/amcc/taihu/Makefile
 create mode 100644 board/amcc/taihu/config.mk
 create mode 100644 board/amcc/taihu/flash.c
 create mode 100644 board/amcc/taihu/lcd.c
 create mode 100644 board/amcc/taihu/taihu.c
 create mode 100644 board/amcc/taihu/u-boot.lds
 create mode 100644 board/amcc/taihu/update.c
 create mode 100644 board/netstal/common/flash.c
 create mode 100644 board/netstal/common/nm_bsp.c
 create mode 100644 board/netstal/hcu4/Makefile
 create mode 100644 board/netstal/hcu4/README.txt
 create mode 100644 board/netstal/hcu4/config.mk
 create mode 100644 board/netstal/hcu4/hcu4.c
 create mode 100644 board/netstal/hcu4/u-boot.lds
 create mode 100644 board/netstal/hcu5/Makefile
 create mode 100644 board/netstal/hcu5/README.txt
 create mode 100644 board/netstal/hcu5/config.mk
 create mode 100644 board/netstal/hcu5/hcu5.c
 create mode 100644 board/netstal/hcu5/init.S
 create mode 100644 board/netstal/hcu5/sdram.c
 create mode 100644 board/netstal/hcu5/u-boot.lds
 create mode 100644 board/zeus/Makefile
 create mode 100644 board/zeus/config.mk
 create mode 100644 board/zeus/u-boot.lds
 create mode 100644 board/zeus/update.c
 create mode 100644 board/zeus/zeus.c
 create mode 100644 doc/README.zeus
 create mode 100644 dtt/ds1775.c
 create mode 100644 include/configs/hcu4.h
 create mode 100644 include/configs/hcu5.h
 create mode 100644 include/configs/taihu.h
 create mode 100644 include/configs/zeus.h
 create mode 100644 post/board/lwmon5/Makefile
 create mode 100644 post/board/lwmon5/ecc.c

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200708141639.53753.sr@denx.de> you wrote:
> The following changes since commit 53629f439cc9daba166812749d2cf3102aca7aac:
>   Stefan Roese (1):
>         Merge with git://www.denx.de/git/u-boot.git
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git

Done. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Logic and practical information do not seem to apply here."
"You admit that?"
"To deny the facts would be illogical, Doctor"
	-- Spock and McCoy, "A Piece of the Action", stardate unknown

[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Stefan Roese]

The following changes since commit 461f2274f8d5e15a354ff92648f17c7b2aa76faa:
  Stefan Roese (1):
        Merge with git://www.denx.de/git/u-boot.git

are available in the git repository at:

  git://www.denx.de/git/u-boot-nand-flash.git

Matthias Fuchs (3):
      Migrate esd 405EP boards to new NAND subsystem
      Migrate esd 405EP boards to new NAND subsystem
      Migrate esd 405EP boards to new NAND subsystem

Thomas Knobloch (1):
      [NAND] Bad block skipping for command nboot

 board/esd/ash405/Makefile        |    4 +-
 board/esd/ash405/ash405.c        |   43 +++++--------------
 board/esd/cms700/Makefile        |    5 ++-
 board/esd/cms700/cms700.c        |   39 ++++-------------
 board/esd/common/auto_update.c   |    4 ++
 board/esd/common/esd405ep_nand.c |   87 ++++++++++++++++++++++++++++++++++++++
 board/esd/hh405/Makefile         |    5 ++-
 board/esd/hh405/hh405.c          |   22 +---------
 board/esd/hub405/Makefile        |    4 +-
 board/esd/hub405/hub405.c        |   34 ---------------
 board/esd/plu405/Makefile        |    5 ++-
 board/esd/plu405/plu405.c        |   56 ++++--------------------
 board/esd/voh405/Makefile        |    4 +-
 board/esd/voh405/voh405.c        |   20 ---------
 board/esd/wuh405/Makefile        |    4 +-
 board/esd/wuh405/wuh405.c        |   33 --------------
 common/cmd_nand.c                |   37 ++++++++++++++--
 include/configs/ASH405.h         |   43 +++++-------------
 include/configs/CMS700.h         |   39 ++++-------------
 include/configs/CPCI405.h        |    2 -
 include/configs/CPCI4052.h       |    2 -
 include/configs/CPCI405AB.h      |    3 -
 include/configs/CPCI405DT.h      |    2 -
 include/configs/HH405.h          |   39 ++++-------------
 include/configs/HUB405.h         |   39 ++++-------------
 include/configs/PLU405.h         |   57 ++++---------------------
 include/configs/VOH405.h         |   39 ++++-------------
 include/configs/WUH405.h         |   42 ++++--------------
 28 files changed, 243 insertions(+), 470 deletions(-)
 create mode 100644 board/esd/common/esd405ep_nand.c

[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Wolfgang Denk]

In message <200708160858.42326.sr@denx.de> you wrote:
> The following changes since commit 461f2274f8d5e15a354ff92648f17c7b2aa76faa:
>   Stefan Roese (1):
>         Merge with git://www.denx.de/git/u-boot.git
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-nand-flash.git

Merged. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is, however, a strange, musty smell in the air that reminds  me
of something...hmm...yes...I've got it...there's a VMS nearby, or I'm
a Blit.          - Larry Wall in Configure from the perl distribution

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit f31b0aecb5435143ac1cd5cf2abab1f9ef6ba8ea:
  Stefan Roese (1):
        Merge with git://www.denx.de/git/u-boot.git

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git 

Niklaus Giger (2):
      PPC4xx:HCU4/5 cleanup ecc/sdram init
      PPC4xx:HCU4/5 cleanup

Stefan Roese (4):
      ppc4xx: Update Sequoia/Rainier bootstrap command
      Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
      ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
      ppc4xx: Remove #warning in esd auto_update.c

 MAINTAINERS                      |    1 +
 MAKEALL                          |    1 +
 board/amcc/sequoia/cmd_sequoia.c |  205 +++++++++++++++++++++++++++++---------
 board/esd/common/auto_update.c   |    4 -
 board/netstal/hcu4/hcu4.c        |   20 ++--
 board/netstal/hcu5/hcu5.c        |   69 +++++++++----
 board/netstal/hcu5/sdram.c       |   15 ++-
 include/configs/sequoia.h        |    7 +-
 8 files changed, 237 insertions(+), 85 deletions(-)

[U-Boot-Users] [ColdFire] Please pull git://www.denx.de/git/u-boot-coldfire.git

[Stefan Roese]

The following changes since commit d35b508a55508535b6e8445b718585d27df733d3:
  Kim Phillips (1):
        fdt: suppress unused variable 'bd' warning

are available in the git repository at:

  git://www.denx.de/git/u-boot-coldfire.git

John Rigby (2):
      Merge branch 'master' into u-boot-5329-early
      Merge branch 'denx-coldfire' into coldfire-aug2007

Stefan Roese (7):
      Merge with /home/stefan/git/u-boot/u-boot-coldfire-freescale
      Coding style cleanup
      Merge with git://www.denx.de/git/u-boot.git
      Coding style cleanup
      Merge with git://www.denx.de/git/u-boot.git
      Coding style cleanup
      ColdFire: Fix some remaining problems with CFG_CMD_

TsiChung (1):
      Cache update and added CFG_UNIFY_CACHE

TsiChung Liew (1):
      Added M5329AFEE and M5329BFEE Platforms

TsiChungLiew (47):
      Revert file mode
      Create new header file and move peripherals base address from configs file to new header file.
      Clean up
      Clean up
      Seperate old structure defines and new structure defines
      Seperate old structure defines and new structure defines
      Duplicate code
      Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
      MII functions calls.
      Update for flash.o and mii.o
      Update header file and removed interrupt_init()
      Update header file and enable icache
      Update header file and some clean up
      Enable Icache
      Create interrupts.c and modify Makefile
      Header file update, clean up and cache handling
      Rename mcfserial.c. Update include header
      Rename mcfrtc to rtc
      New timer structure and defines
      New uart structure and defines
      Update header file and clean up
      Add mcffec_initialize()
      Update header files
      Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
      Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
      Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
      Moved sync() from board file to include/asm-m68k/io.h
      Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
      Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
      Added I2C support
      Added NAND support
      Port enabled for I2C signals and chipselects port configuration.
      ColdFire: MCF5329 Update and cleanup
      ColdFire: MCF5329 header file clean up
      ColdFire: MCF5329 update cache
      ColdFire: MCF52x2 update
      ColdFire: MCF52x2 Header files update
      ColdFire: cobra5272 platform for MCF52x2 update
      ColdFire: idmr platform MCF52x2 update
      ColdFire: update r5200 platform for MCF52x2
      ColdFire: update TASREG platform for MCF52x2
      ColdFire: Update EB+MCF-EV123 platform
      ColdFire: Update Freescale MCF52x2 platforms
      ColdFire: Add M5249EVB platform for MCF52x2
      ColdFire: Add M5253EVBE platform for MCF52x2
      ColdFire: Add M54455EVB for MCF5445x
      ColdFire: Add M5235EVB Platform for MCF523x

 CREDITS                               |   45 +-
 MAINTAINERS                           |   10 +
 MAKEALL                               |    7 +-
 Makefile                              |   67 ++
 README                                |    2 +
 board/BuS/EB+MCF-EV123/Makefile       |    2 +-
 board/BuS/EB+MCF-EV123/mii.c          |  304 ++++++
 board/cobra5272/Makefile              |    2 +-
 board/cobra5272/cobra5272.c           |    5 +-
 board/cobra5272/mii.c                 |  303 ++++++
 board/freescale/m5235evb/Makefile     |   44 +
 board/freescale/m5235evb/config.mk    |   28 +
 board/freescale/m5235evb/m5235evb.c   |  117 +++
 board/freescale/m5235evb/mii.c        |  307 ++++++
 board/freescale/m5235evb/u-boot.16    |  145 +++
 board/freescale/m5235evb/u-boot.32    |  153 +++
 board/freescale/m5235evb/u-boot.lds   |  145 +++
 board/freescale/m5249evb/Makefile     |   44 +
 board/freescale/m5249evb/config.mk    |   25 +
 board/freescale/m5249evb/m5249evb.c   |  113 +++
 board/freescale/m5249evb/u-boot.lds   |  146 +++
 board/freescale/m5253evbe/Makefile    |   44 +
 board/freescale/m5253evbe/config.mk   |   25 +
 board/freescale/m5253evbe/m5253evbe.c |  132 +++
 board/freescale/m5253evbe/u-boot.lds  |  144 +++
 board/freescale/m5329evb/Makefile     |   44 +
 board/freescale/m5329evb/config.mk    |   25 +
 board/freescale/m5329evb/m5329evb.c   |   88 ++
 board/freescale/m5329evb/mii.c        |  306 ++++++
 board/freescale/m5329evb/nand.c       |  114 +++
 board/freescale/m5329evb/u-boot.lds   |  144 +++
 board/freescale/m54455evb/Makefile    |   44 +
 board/freescale/m54455evb/config.mk   |   25 +
 board/freescale/m54455evb/flash.c     |  974 +++++++++++++++++++
 board/freescale/m54455evb/m54455evb.c |  164 ++++
 board/freescale/m54455evb/mii.c       |  320 +++++++
 board/freescale/m54455evb/u-boot.lds  |  144 +++
 board/idmr/Makefile                   |    2 +-
 board/idmr/idmr.c                     |    3 +-
 board/idmr/mii.c                      |  303 ++++++
 board/m5271evb/Makefile               |    2 +-
 board/m5271evb/m5271evb.c             |    3 +-
 board/m5271evb/mii.c                  |  303 ++++++
 board/m5272c3/Makefile                |    2 +-
 board/m5272c3/m5272c3.c               |    7 +-
 board/m5272c3/mii.c                   |  303 ++++++
 board/m5282evb/Makefile               |    2 +-
 board/m5282evb/config.mk              |    2 +-
 board/m5282evb/flash.c                |  378 --------
 board/m5282evb/m5282evb.c             |   61 ++-
 board/m5282evb/mii.c                  |  304 ++++++
 board/r5200/Makefile                  |    2 +-
 board/r5200/mii.c                     |  303 ++++++
 common/cmd_bdinfo.c                   |   67 ++-
 common/cmd_mii.c                      |    2 +-
 cpu/mcf523x/Makefile                  |   48 +
 cpu/mcf523x/config.mk                 |   27 +
 cpu/mcf523x/cpu.c                     |  109 +++
 cpu/mcf523x/cpu_init.c                |  145 +++
 cpu/mcf523x/interrupts.c              |   49 +
 cpu/mcf523x/speed.c                   |   49 +
 cpu/mcf523x/start.S                   |  340 +++++++
 cpu/mcf52x2/Makefile                  |    4 +-
 cpu/mcf52x2/cpu.c                     |  184 ++--
 cpu/mcf52x2/cpu_init.c                |  448 ++++++----
 cpu/mcf52x2/fec.c                     |  605 ------------
 cpu/mcf52x2/interrupts.c              |  186 +---
 cpu/mcf52x2/serial.c                  |  215 -----
 cpu/mcf52x2/speed.c                   |   35 +-
 cpu/mcf52x2/start.S                   |   54 +-
 cpu/mcf532x/Makefile                  |   48 +
 cpu/mcf532x/config.mk                 |   27 +
 cpu/mcf532x/cpu.c                     |  119 +++
 cpu/mcf532x/cpu_init.c                |  141 +++
 cpu/mcf532x/interrupts.c              |   49 +
 cpu/mcf532x/speed.c                   |  216 +++++
 cpu/mcf532x/start.S                   |  335 +++++++
 cpu/mcf5445x/Makefile                 |   48 +
 cpu/mcf5445x/config.mk                |   27 +
 cpu/mcf5445x/cpu.c                    |   97 ++
 cpu/mcf5445x/cpu_init.c               |  140 +++
 cpu/mcf5445x/interrupts.c             |   52 +
 cpu/mcf5445x/pci.c                    |  189 ++++
 cpu/mcf5445x/speed.c                  |  186 ++++
 cpu/mcf5445x/start.S                  |  388 ++++++++
 doc/README.m5253evbe                  |  103 ++
 doc/README.m54455evb                  |  416 +++++++++
 drivers/net/Makefile                  |   45 +
 drivers/net/mcffec.c                  |  597 ++++++++++++
 drivers/serial/Makefile               |   45 +
 drivers/serial/mcfuart.c              |  131 +++
 include/asm-m68k/bitops.h             |   39 +
 include/asm-m68k/byteorder.h          |  102 ++-
 include/asm-m68k/errno.h              |  138 +++
 include/asm-m68k/fec.h                |  277 ++++++-
 include/asm-m68k/fsl_i2c.h            |   86 ++
 include/asm-m68k/global_data.h        |    8 +
 include/asm-m68k/immap.h              |  242 +++++
 include/asm-m68k/immap_5235.h         |  378 ++++++++
 include/asm-m68k/immap_5249.h         |   22 +-
 include/asm-m68k/immap_5253.h         |   95 ++
 include/asm-m68k/immap_5271.h         |  136 ++--
 include/asm-m68k/immap_5272.h         |  689 ++++++--------
 include/asm-m68k/immap_5282.h         |  217 ++++--
 include/asm-m68k/immap_5329.h         |  793 ++++++++++++++++
 include/asm-m68k/immap_5445x.h        |  937 +++++++++++++++++++
 include/asm-m68k/io.h                 |  221 +++++-
 include/asm-m68k/m5235.h              |  905 ++++++++++++++++++
 include/asm-m68k/m5249.h              |  205 ++---
 include/asm-m68k/m5253.h              |   73 ++
 include/asm-m68k/m5271.h              |  105 ++-
 include/asm-m68k/m5272.h              |  221 ++++--
 include/asm-m68k/m5282.h              |  270 ++++--
 include/asm-m68k/m5329.h              | 1658 +++++++++++++++++++++++++++++++++
 include/asm-m68k/m5445x.h             | 1541 ++++++++++++++++++++++++++++++
 include/asm-m68k/mcftimer.h           |  113 ---
 include/asm-m68k/mcfuart.h            |  221 -----
 include/asm-m68k/ptrace.h             |   44 +-
 include/asm-m68k/rtc.h                |  109 +++
 include/asm-m68k/timer.h              |  118 +++
 include/asm-m68k/u-boot.h             |   56 +-
 include/asm-m68k/uart.h               |  171 ++++
 include/common.h                      |    2 +-
 include/configs/EB+MCF-EV123.h        |   41 +-
 include/configs/M5235EVB.h            |  261 ++++++
 include/configs/M5249EVB.h            |  194 ++++
 include/configs/M5253EVBE.h           |  212 +++++
 include/configs/M5271EVB.h            |  100 ++-
 include/configs/M5272C3.h             |  105 ++-
 include/configs/M5282EVB.h            |  147 +++-
 include/configs/M5329EVB.h            |  267 ++++++
 include/configs/M54455EVB.h           |  391 ++++++++
 include/configs/TASREG.h              |    4 +
 include/configs/cobra5272.h           |   26 +-
 include/configs/idmr.h                |   32 +-
 include/configs/r5200.h               |   30 +-
 lib_m68k/Makefile                     |    2 +-
 lib_m68k/board.c                      |   98 ++-
 lib_m68k/interrupts.c                 |  115 +++
 lib_m68k/m68k_linux.c                 |  378 +++++---
 lib_m68k/time.c                       |  250 ++----
 net/eth.c                             |    4 +
 rtc/Makefile                          |    3 +-
 rtc/mcfrtc.c                          |  121 +++
 144 files changed, 22386 insertions(+), 3284 deletions(-)
 create mode 100644 board/BuS/EB+MCF-EV123/mii.c
 create mode 100644 board/cobra5272/mii.c
 create mode 100644 board/freescale/m5235evb/Makefile
 create mode 100644 board/freescale/m5235evb/config.mk
 create mode 100644 board/freescale/m5235evb/m5235evb.c
 create mode 100644 board/freescale/m5235evb/mii.c
 create mode 100644 board/freescale/m5235evb/u-boot.16
 create mode 100644 board/freescale/m5235evb/u-boot.32
 create mode 100644 board/freescale/m5235evb/u-boot.lds
 create mode 100644 board/freescale/m5249evb/Makefile
 create mode 100644 board/freescale/m5249evb/config.mk
 create mode 100644 board/freescale/m5249evb/m5249evb.c
 create mode 100644 board/freescale/m5249evb/u-boot.lds
 create mode 100644 board/freescale/m5253evbe/Makefile
 create mode 100644 board/freescale/m5253evbe/config.mk
 create mode 100644 board/freescale/m5253evbe/m5253evbe.c
 create mode 100644 board/freescale/m5253evbe/u-boot.lds
 create mode 100644 board/freescale/m5329evb/Makefile
 create mode 100644 board/freescale/m5329evb/config.mk
 create mode 100644 board/freescale/m5329evb/m5329evb.c
 create mode 100644 board/freescale/m5329evb/mii.c
 create mode 100644 board/freescale/m5329evb/nand.c
 create mode 100644 board/freescale/m5329evb/u-boot.lds
 create mode 100644 board/freescale/m54455evb/Makefile
 create mode 100644 board/freescale/m54455evb/config.mk
 create mode 100644 board/freescale/m54455evb/flash.c
 create mode 100644 board/freescale/m54455evb/m54455evb.c
 create mode 100644 board/freescale/m54455evb/mii.c
 create mode 100644 board/freescale/m54455evb/u-boot.lds
 create mode 100644 board/idmr/mii.c
 create mode 100644 board/m5271evb/mii.c
 create mode 100644 board/m5272c3/mii.c
 delete mode 100644 board/m5282evb/flash.c
 create mode 100644 board/m5282evb/mii.c
 create mode 100644 board/r5200/mii.c
 create mode 100644 cpu/mcf523x/Makefile
 create mode 100644 cpu/mcf523x/config.mk
 create mode 100644 cpu/mcf523x/cpu.c
 create mode 100644 cpu/mcf523x/cpu_init.c
 create mode 100644 cpu/mcf523x/interrupts.c
 create mode 100644 cpu/mcf523x/speed.c
 create mode 100644 cpu/mcf523x/start.S
 delete mode 100644 cpu/mcf52x2/fec.c
 delete mode 100644 cpu/mcf52x2/serial.c
 create mode 100644 cpu/mcf532x/Makefile
 create mode 100644 cpu/mcf532x/config.mk
 create mode 100644 cpu/mcf532x/cpu.c
 create mode 100644 cpu/mcf532x/cpu_init.c
 create mode 100644 cpu/mcf532x/interrupts.c
 create mode 100644 cpu/mcf532x/speed.c
 create mode 100644 cpu/mcf532x/start.S
 create mode 100644 cpu/mcf5445x/Makefile
 create mode 100644 cpu/mcf5445x/config.mk
 create mode 100644 cpu/mcf5445x/cpu.c
 create mode 100644 cpu/mcf5445x/cpu_init.c
 create mode 100644 cpu/mcf5445x/interrupts.c
 create mode 100644 cpu/mcf5445x/pci.c
 create mode 100644 cpu/mcf5445x/speed.c
 create mode 100644 cpu/mcf5445x/start.S
 create mode 100644 doc/README.m5253evbe
 create mode 100644 doc/README.m54455evb
 create mode 100644 drivers/net/Makefile
 create mode 100644 drivers/net/mcffec.c
 create mode 100644 drivers/serial/Makefile
 create mode 100644 drivers/serial/mcfuart.c
 create mode 100644 include/asm-m68k/errno.h
 create mode 100644 include/asm-m68k/fsl_i2c.h
 create mode 100644 include/asm-m68k/immap.h
 create mode 100644 include/asm-m68k/immap_5235.h
 create mode 100644 include/asm-m68k/immap_5253.h
 create mode 100644 include/asm-m68k/immap_5329.h
 create mode 100644 include/asm-m68k/immap_5445x.h
 create mode 100644 include/asm-m68k/m5235.h
 create mode 100644 include/asm-m68k/m5253.h
 create mode 100644 include/asm-m68k/m5329.h
 create mode 100644 include/asm-m68k/m5445x.h
 delete mode 100644 include/asm-m68k/mcftimer.h
 delete mode 100644 include/asm-m68k/mcfuart.h
 create mode 100644 include/asm-m68k/rtc.h
 create mode 100644 include/asm-m68k/timer.h
 create mode 100644 include/asm-m68k/uart.h
 create mode 100644 include/configs/M5235EVB.h
 create mode 100644 include/configs/M5249EVB.h
 create mode 100644 include/configs/M5253EVBE.h
 create mode 100644 include/configs/M5329EVB.h
 create mode 100644 include/configs/M54455EVB.h
 create mode 100644 lib_m68k/interrupts.c
 create mode 100644 rtc/mcfrtc.c

[U-Boot-Users] [ColdFire] Please pull git://www.denx.de/git/u-boot-coldfire.git

[Wolfgang Denk]

In message <200708181444.14192.sr@denx.de> you wrote:
> The following changes since commit d35b508a55508535b6e8445b718585d27df733d3:
>   Kim Phillips (1):
>         fdt: suppress unused variable 'bd' warning
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-coldfire.git

Done. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"...one of the main causes of the fall of the Roman Empire was  that,
lacking  zero,  they had no way to indicate successful termination of
their C programs."                                     - Robert Firth

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200708161953.39723.sr@denx.de> you wrote:
> The following changes since commit f31b0aecb5435143ac1cd5cf2abab1f9ef6ba8ea:
>   Stefan Roese (1):
>         Merge with git://www.denx.de/git/u-boot.git
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git 

Merged, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Microsoft Multitasking:
                     several applications can crash at the same time.

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 3e66c078003607a7d1d214c15a5f262bc1b4032f:
  Wolfgang Denk (1):
        Fix some build errors.

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git


Wolfgang, please pull. These patches contain mainly small enhancements
and bug-fixes.

Thanks.


Stefan Roese (6):
      ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
      Merge with /home/stefan/git/u-boot/u-boot-ppc4xx
      ppc4xx: Remove unused option CFG_INIT_RAM_OCM
      ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
      ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
      ppc4xx: Add RTC POST test to lwmon5 board configuration

Yuri Tikhonov (1):
      POST: limit memory test area to not touch global data anymore

 board/lwmon5/Makefile         |    2 +-
 board/lwmon5/kbd.c            |  458 +++++++++++++++++++++++++++++++++++++++++
 board/lwmon5/lwmon5.c         |   40 +++-
 include/asm-ppc/global_data.h |    2 +-
 include/configs/hcu5.h        |    1 -
 include/configs/lwmon5.h      |   47 +++--
 post/drivers/memory.c         |    3 +
 7 files changed, 523 insertions(+), 30 deletions(-)
 create mode 100644 board/lwmon5/kbd.c

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200708281512.06847.sr@denx.de> you wrote:
> The following changes since commit 3e66c078003607a7d1d214c15a5f262bc1b4032f:
>   Wolfgang Denk (1):
>         Fix some build errors.
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git
> 
> 
> Wolfgang, please pull. These patches contain mainly small enhancements
> and bug-fixes.

Done.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"It follows that any commander in chief who undertakes to carry out a
plan which he considers defective is at fault; he must put forth  his
reasons,  insist  of  the  plan being changed, and finally tender his
resignation rather than be the instrument of his army's downfall."
- Napoleon, "Military Maxims and Thought"

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 9c02defc29b57945b600714cf61ddfd02b02fb14:
  Yuri Tikhonov (1):
        POST: limit memory test area to not touch global data anymore

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git ..BRANCH.NOT.VERIFIED..

Gary Jennejohn (1):
      ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia

 board/amcc/sequoia/init.S |    3 +++
 drivers/pci_auto.c        |    8 +++++++-
 include/configs/sequoia.h |    3 ++-
 3 files changed, 12 insertions(+), 2 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200709021405.46986.sr@denx.de> you wrote:
> The following changes since commit 9c02defc29b57945b600714cf61ddfd02b02fb14:
>   Yuri Tikhonov (1):
>         POST: limit memory test area to not touch global data anymore
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git ..BRANCH.NOT.VERIFIED..

What does "..BRANCH.NOT.VERIFIED.." mean ?!?

> Gary Jennejohn (1):
>       ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia

Merged.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"A dirty mind is a joy forever."                       - Randy Kunkee

[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Stefan Roese]

The following changes since commit 67c31036acaaaa992fc346cc89db0909a7e733c4:
  Wolfgang Denk (1):
        TQM8xx[LM]: Fix broken environment alignment.

are available in the git repository at:

  git://www.denx.de/git/u-boot-nand-flash.git

Kyungmin Park (3):
      OneNAND support (take #2)
      OneNAND support (take #2)
      OneNAND support (take #2)

Stefan Roese (1):
      Small whitespace cleanup of OneNAND patch

 Makefile                         |    1 +
 common/Makefile                  |    3 +-
 common/cmd_nvedit.c              |    9 +-
 common/cmd_onenand.c             |  155 +++++
 common/env_onenand.c             |  134 ++++
 drivers/onenand/Makefile         |   44 ++
 drivers/onenand/onenand_base.c   | 1294 ++++++++++++++++++++++++++++++++++++++
 drivers/onenand/onenand_bbt.c    |  265 ++++++++
 include/config_cmd_all.h         |    1 +
 include/linux/mtd/bbm.h          |  127 ++++
 include/linux/mtd/onenand.h      |  143 +++++
 include/linux/mtd/onenand_regs.h |  181 ++++++
 include/onenand_uboot.h          |   39 ++
 lib_arm/board.c                  |    8 +
 14 files changed, 2400 insertions(+), 4 deletions(-)
 create mode 100644 common/cmd_onenand.c
 create mode 100644 common/env_onenand.c
 create mode 100644 drivers/onenand/Makefile
 create mode 100644 drivers/onenand/onenand_base.c
 create mode 100644 drivers/onenand/onenand_bbt.c
 create mode 100644 include/linux/mtd/bbm.h
 create mode 100644 include/linux/mtd/onenand.h
 create mode 100644 include/linux/mtd/onenand_regs.h
 create mode 100644 include/onenand_uboot.h

[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Wolfgang Denk]

In message <200709170850.16744.sr@denx.de> you wrote:
> The following changes since commit 67c31036acaaaa992fc346cc89db0909a7e733c4:
>   Wolfgang Denk (1):
>         TQM8xx[LM]: Fix broken environment alignment.
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-nand-flash.git
> 
> Kyungmin Park (3):
>       OneNAND support (take #2)
>       OneNAND support (take #2)
>       OneNAND support (take #2)
> 
> Stefan Roese (1):
>       Small whitespace cleanup of OneNAND patch

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
KLB is an acronym for `Known Lazy Bastard', aka non-FAQ  reader,  aka
person  who  would  rather  make  someone  take their time to explain
something basic than look it up in a  FAQ.
         -- Tom Christiansen in <6aq547$mnr$2@csnews.cs.colorado.edu>

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit c3c909a209d05f27ebd090f21c0b46d90925f990:
  Wolfgang Denk (1):
        Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Stefan Roese (3):
      ppc4xx: Change lwmon5 default environment to support Linux RTC
      ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
      Merge branch 'master' of /home/stefan/git/u-boot/lwmon5

 include/configs/lwmon5.h |   11 ++++++-----
 1 files changed, 6 insertions(+), 5 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit c3c909a209d05f27ebd090f21c0b46d90925f990:
  Wolfgang Denk (1):
        Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Grzegorz Bernacki (1):
      Program EPLD to force full duplex mode for PHY.

Stefan Roese (5):
      ppc4xx: Change lwmon5 default environment to support Linux RTC
      ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
      Merge branch 'master' of /home/stefan/git/u-boot/lwmon5
      ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
      ppc4xx: Coding style cleanup

 board/amcc/luan/luan.c   |   17 ++++++++++++-----
 cpu/ppc4xx/440spe_pcie.c |   10 +++++-----
 cpu/ppc4xx/4xx_enet.c    |   16 ++++++++++------
 include/configs/lwmon5.h |   16 +++++++++++-----
 4 files changed, 38 insertions(+), 21 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200710021147.47407.sr@denx.de> you wrote:
> The following changes since commit c3c909a209d05f27ebd090f21c0b46d90925f990:
>   Wolfgang Denk (1):
>         Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/master
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Grzegorz Bernacki (1):
>       Program EPLD to force full duplex mode for PHY.
> 
> Stefan Roese (5):
>       ppc4xx: Change lwmon5 default environment to support Linux RTC
>       ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
>       Merge branch 'master' of /home/stefan/git/u-boot/lwmon5
>       ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
>       ppc4xx: Coding style cleanup

Done. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Der Dativ ist dem Genitiv sein Tod.

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763:
  Michal Simek (1):
        [FIX] XUPV2P change command handling

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Wolfgang, please pull this into current rc, since these are bugfixes.
Thanks.

Stefan Roese (2):
      ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
      ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier

 board/amcc/sequoia/cmd_sequoia.c |    9 +++++++--
 board/amcc/sequoia/sequoia.c     |    7 ++++---
 board/amcc/yosemite/yosemite.c   |    7 +++++--
 include/configs/sequoia.h        |    2 ++
 include/configs/yosemite.h       |    2 ++
 5 files changed, 20 insertions(+), 7 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200710151157.33027.sr@denx.de> you wrote:
> The following changes since commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763:
>   Michal Simek (1):
>         [FIX] XUPV2P change command handling
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Wolfgang, please pull this into current rc, since these are bugfixes.
> Thanks.
> 
> Stefan Roese (2):
>       ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
>       ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier

Merged. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Der Dativ ist dem Genitiv sein Tod.

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit eff786a9b89144478f478c4193fcad5b498feb72:
  Wolfgang Denk (1):
        Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/master

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master


Wolfgang, please pull this additional fixup into current rc. Thanks.

Stefan Roese (1):
      ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command

 board/amcc/sequoia/cmd_sequoia.c |    8 +++++++-
 1 files changed, 7 insertions(+), 1 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200710180759.39317.sr@denx.de> you wrote:
> The following changes since commit eff786a9b89144478f478c4193fcad5b498feb72:
>   Wolfgang Denk (1):
>         Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/master
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> 
> Wolfgang, please pull this additional fixup into current rc. Thanks.
> 
> Stefan Roese (1):
>       ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command

Done.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A Perl script is correct if it's halfway readable and  gets  the  job
done before your boss fires you.
                       - L. Wall & R. L. Schwartz, _Programming Perl_

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

Hi Wolfgang,

The following changes since commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
  Wolfgang Denk (1):
        Release v1.3.1

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Bartlomiej Sieka (1):
      CFI: synchronize command offsets with Linux CFI driver

Haavard Skinnemoen (10):
      cfi_flash: Break long lines
      cfi_flash: Make some needlessly global functions static
      cfi_flash: Reorder functions and eliminate extra prototypes
      Implement __raw_{read,write}[bwl] on all architectures
      cfi_flash: Introduce read and write accessors
      Introduce map_physmem() and unmap_physmem()
      cfi_flash: Use map_physmem() and unmap_physmem()
      cfi_flash: Read whole QRY structure in one go
      cfi_flash: Add cmdset-specific init functions
      cfi_flash: Add manufacturer-specific fixups

Michael Schwingen (1):
      CFI: support JEDEC flash roms in CFI-flash framework

Stefan Roese (1):
      CFI: Coding style cleanup

 drivers/mtd/Makefile        |    1 +
 drivers/mtd/cfi_flash.c     | 1907 +++++++++++++++++++++++++------------------
 drivers/mtd/jedec_flash.c   |  311 +++++++
 include/asm-arm/io.h        |   26 +
 include/asm-avr32/io.h      |   32 +
 include/asm-blackfin/io.h   |   26 +
 include/asm-i386/io.h       |   26 +
 include/asm-m68k/io.h       |   41 +
 include/asm-microblaze/io.h |   26 +
 include/asm-mips/io.h       |   26 +
 include/asm-nios/io.h       |   34 +
 include/asm-nios2/io.h      |   34 +
 include/asm-ppc/io.h        |   58 ++-
 include/flash.h             |   11 +
 14 files changed, 1773 insertions(+), 786 deletions(-)
 create mode 100644 drivers/mtd/jedec_flash.c


Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

Dear Stefan,

in message <200712171556.28716.sr@denx.de> you wrote:
> 
> The following changes since commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2:
>   Wolfgang Denk (1):
>         Release v1.3.1
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master

Done.

Note that the new, updated code still shows some old issues. See next
posting for details.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Memories of you remind me of you.                   - Karl Lehenbauer

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit 0dcfe3a225a9436fc514f374a19242c672f1172b:
  Wolfgang Denk (1):
        Merge branch 'master' of /home/wd/git/u-boot/custodians

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Stefan Roese (1):
      cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()

 drivers/mtd/cfi_flash.c |   52 
++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 51 insertions(+), 1 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

Wolfgang, please pull the 4xx changes from the u-boot-ppc4xx master
branch.

Unfortunately I couldn't create a complete list of changes as done
usually, since I merge multiple times with mainline. Then
"git-request-pull" isn't useful anymore to create a list of changes
only present in the local repository. It creates a list of changes
which also included patches from the mainline repo. Perhaps somebody else
with more "git-knowledge" can help out here and tell me how to create
such a git-shortlog which only includes the local changes.

Thanks.

Note: The current PMC440 port added by Matthias Fuchs relies on some
other patches to be applied (FPGA etc.). So it doesn't build currently.


Here is a list of changes which is *not* complete. I generated this quite
a while ago, before my first merge with mainline:

The following changes since commit 49801028715cd8bc22863cdfc0ee7919b7a6af4b:
  Stefan Roese (1):
        Merge git://www.denx.de/git/u-boot

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Eugene O'Brien (2):
      ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
      ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM

Matthias Fuchs (3):
      ppc4xx: Remove redundant code from 4xx network driver
      ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
      ppc4xx: Use generic usb-ohci driver for sequoia board

Stefan Roese (70):
      ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
      ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
      ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
      ppc4xx: Add a comment for 405EX PCIe endpoint configuration
      ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
      ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
      ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
      ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
      ppc4xx: 4xx_pcie: Disable debug output as default
      ppc4xx: 4xx_pcie: Change PCIe status output to match common style
      DTT: Prepare DS1775 driver for use of different I2C addresses
      POST: Add 405EX support to 4xx UART POST test
      ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
      ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
      ppc4xx: Add PPC405EX support
      ppc4xx: Add initial AMCC Kilauea 405EX support
      ppc4xx: Fix small merge problem in 4xx_enet.c
      ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
      ppc4xx: Add additional debug info to 4xx fdt support
      ppc4xx: Enable device tree support (fdt) on Kilauea per default
      ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
      ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
      ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
      ppc4xx: Fix size setup in Kilauea DDR2 init routine
      ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
      rtc: Add Xicor/Intersil X1205 RTC support
      ppc: Small Kilauea cleanup of config file
      ppc4xx: Add freqUART to CPU speed detection
      ppc4xx: Add initial AMCC Makalu 405EX support
      ppc4xx: Correct UART input clock calculation and passing to fdt
      ppc4xx: Rework of 4xx serial driver (1)
      ppc4xx: Rework of 4xx serial driver (2)
      ppc4xx: Rework of 4xx serial driver (3)
      ppc4xx: Rework of 4xx serial driver (4)
      ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
      ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
      ppc4xx: Correct UART input clock calculation and passing to fdt
      ppc4xx: Fix POST ethernet test for Haleakala
      ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
      ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
      ppc4xx: Remove temporary TLB entry in POST cache test
      ppc4xx: Remove compiler warning from previous commit
      ppc4xx: Rework 4xx cache support
      ppc4xx: Remove cache definition from 4xx board config files
      ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
      ppc4xx: Change 4xx ethernet driver to handle cached memory too
      ppc4xx: Remove temporary TLB entry in POST cache test only for 440
      ppc4xx: Change 4xx POST ethernet test to handle cached memory too
      ppc4xx: Enable CPU POST test for 4xx with dcache enabled
      ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
      ppc4xx: Fix acadia_nand build problem
      ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
      ppc4xx: Make output a little shorter on PCIe detection
      ppc4xx: Make output a little shorter on I2C bootrom detection
      ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
      ppc4xx: Fix 405EX PCIe UTLSET register setup
      ppc4xx: AMCC Taihu board config file cleanup
      ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
      ppc4xx: Small AMCC Kilauea cleanup
      ppc4xx: Update AMCC Makalu for board rev 1.1
      ppc4xx: Enable 405EX PCIe UTL register configuration
      ppc4xx: Update AMCC Kilauea config file
      ppc4xx: Correct 405EX PCIe UTL register mapping
      ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
      ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
      ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
      ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
      ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
      ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
      ppc4xx: 405EX: Correctly enable USB pins

 MAINTAINERS                                        |    3 +
 MAKEALL                                            |    5 +
 Makefile                                           |   17 +
 board/amcc/bamboo/bamboo.c                         |    4 +-
 board/amcc/bubinga/u-boot.lds                      |   13 -
 board/amcc/ebony/u-boot.lds                        |   13 -
 board/amcc/katmai/katmai.c                         |   84 +-
 board/amcc/kilauea/Makefile                        |   50 ++
 board/amcc/kilauea/cmd_pll.c                       |  297 +++++++
 board/amcc/kilauea/config.mk                       |   32 +
 board/amcc/kilauea/init.S                          |  154 ++++
 board/amcc/kilauea/kilauea.c                       |  391 ++++++++
 board/amcc/kilauea/memory.c                        |   79 ++
 .../u-boot.lds.debug => kilauea/u-boot-nand.lds}   |   53 +-
 .../{yucca/u-boot.lds.debug => kilauea/u-boot.lds} |   59 +-
 board/amcc/luan/luan.c                             |    6 +
 board/amcc/makalu/Makefile                         |   50 ++
 board/amcc/makalu/cmd_pll.c                        |  297 +++++++
 board/amcc/makalu/config.mk                        |   24 +
 board/amcc/makalu/init.S                           |  148 ++++
 board/amcc/makalu/makalu.c                         |  352 ++++++++
 board/amcc/makalu/memory.c                         |  188 ++++
 .../{yucca/u-boot.lds.debug => makalu/u-boot.lds}  |   59 +-
 board/amcc/ocotea/u-boot.lds                       |   13 -
 board/amcc/sequoia/init.S                          |    4 +
 board/amcc/taihu/u-boot.lds                        |   13 -
 board/amcc/taishan/showinfo.c                      |   14 +-
 board/amcc/taishan/u-boot.lds                      |   13 -
 board/amcc/walnut/u-boot.lds                       |   13 -
 board/amcc/yosemite/u-boot.lds                     |   13 -
 board/amcc/yucca/u-boot.lds                        |   13 -
 board/amcc/yucca/yucca.c                           |   93 +--
 board/amirix/ap1000/u-boot.lds                     |    2 +-
 board/cray/L1/u-boot.lds                           |    2 +-
 board/csb272/u-boot.lds                            |    2 +-
 board/csb472/u-boot.lds                            |    2 +-
 board/dave/PPChameleonEVB/u-boot.lds               |    2 +-
 board/eric/u-boot.lds                              |    2 +-
 board/esd/apc405/u-boot.lds                        |    2 +-
 board/esd/ar405/u-boot.lds                         |    2 +-
 board/esd/ash405/u-boot.lds                        |    2 +-
 board/esd/canbt/u-boot.lds                         |    2 +-
 board/esd/cms700/u-boot.lds                        |    2 +-
 board/esd/cpci2dp/u-boot.lds                       |    2 +-
 board/esd/cpci405/u-boot.lds                       |    2 +-
 board/esd/cpci440/cpci440.c                        |    2 +-
 board/esd/cpci440/u-boot.lds                       |    2 +-
 board/esd/cpciiser4/u-boot.lds                     |    2 +-
 board/esd/dasa_sim/u-boot.lds                      |    2 +-
 board/esd/dp405/u-boot.lds                         |    2 +-
 board/esd/du405/u-boot.lds                         |    2 +-
 board/esd/hh405/u-boot.lds                         |    2 +-
 board/esd/hub405/u-boot.lds                        |    2 +-
 board/esd/ocrtc/cmd_ocrtc.c                        |    2 +-
 board/esd/ocrtc/u-boot.lds                         |    2 +-
 board/esd/pci405/cmd_pci405.c                      |    2 +-
 board/esd/pci405/pci405.c                          |    2 +-
 board/esd/pci405/u-boot.lds                        |    2 +-
 board/esd/plu405/u-boot.lds                        |    2 +-
 board/esd/pmc405/u-boot.lds                        |    2 +-
 board/esd/voh405/u-boot.lds                        |    2 +-
 board/esd/vom405/u-boot.lds                        |    2 +-
 board/esd/wuh405/u-boot.lds                        |    2 +-
 board/exbitgen/u-boot.lds                          |    2 +-
 board/g2000/u-boot.lds                             |    2 +-
 board/lwmon5/sdram.c                               |    2 +-
 board/ml2/u-boot.lds                               |    2 +-
 board/mpl/common/common_util.c                     |    6 +-
 board/mpl/common/flash.c                           |    2 +-
 board/mpl/mip405/u-boot.lds                        |    2 +-
 board/mpl/pip405/u-boot.lds                        |    2 +-
 board/netstal/hcu5/sdram.c                         |    2 +-
 board/prodrive/alpr/u-boot.lds                     |   13 -
 board/prodrive/p3p440/u-boot.lds                   |   13 -
 board/sandburst/karef/u-boot.lds                   |    2 +-
 board/sandburst/karef/u-boot.lds.debug             |    2 +-
 board/sandburst/metrobox/u-boot.lds                |    2 +-
 board/sandburst/metrobox/u-boot.lds.debug          |    2 +-
 board/sbc405/u-boot.lds                            |    2 +-
 board/sc3/u-boot.lds                               |    2 +-
 board/xilinx/ml300/ml300.c                         |    2 +-
 board/xilinx/ml300/u-boot.lds                      |    2 +-
 board/xpedite1k/u-boot.lds                         |    2 +-
 board/xpedite1k/u-boot.lds.debug                   |    2 +-
 common/serial.c                                    |    6 +-
 common/usb.c                                       |    2 +-
 cpu/ppc4xx/40x_spd_sdram.c                         |    2 +-
 cpu/ppc4xx/440spe_pcie.h                           |  174 ----
 cpu/ppc4xx/44x_spd_ddr.c                           |   15 +-
 cpu/ppc4xx/44x_spd_ddr2.c                          |   31 +-
 cpu/ppc4xx/4xx_enet.c                              |  360 +++++----
 cpu/ppc4xx/{405gp_pci.c => 4xx_pci.c}              |   13 +-
 cpu/ppc4xx/{440spe_pcie.c => 4xx_pcie.c}           |  849 ++++++++----------
 cpu/ppc4xx/{serial.c => 4xx_uart.c}                |  541 ++++--------
 cpu/ppc4xx/Makefile                                |   41 +-
 cpu/ppc4xx/cache.S                                 |  233 +++++
 cpu/ppc4xx/cpu.c                                   |  114 ++--
 cpu/ppc4xx/cpu_init.c                              |   18 +-
 cpu/ppc4xx/fdt.c                                   |  178 ++++
 cpu/ppc4xx/gpio.c                                  |  134 ++--
 cpu/ppc4xx/interrupts.c                            |   20 +-
 cpu/ppc4xx/iop480_uart.c                           |  238 +++++
 cpu/ppc4xx/kgdb.S                                  |    8 +-
 cpu/ppc4xx/miiphy.c                                |   49 +-
 cpu/ppc4xx/ndfc.c                                  |    3 +-
 cpu/ppc4xx/speed.c                                 |  233 +++++-
 cpu/ppc4xx/start.S                                 |  211 ++----
 cpu/ppc4xx/tlb.c                                   |   88 ++-
 cpu/ppc4xx/usb.c                                   |   18 +-
 cpu/ppc4xx/vecnum.h                                |  104 +++
 dtt/ds1775.c                                       |    2 +-
 include/405_mal.h                                  |    4 +-
 include/4xx_i2c.h                                  |    2 +-
 include/{405gp_pci.h => asm-ppc/4xx_pci.h}         |    0 
 include/asm-ppc/4xx_pcie.h                         |  336 +++++++
 include/asm-ppc/cache.h                            |   21 +-
 include/asm-ppc/global_data.h                      |    3 +
 include/asm-ppc/gpio.h                             |   35 +
 include/asm-ppc/mmu.h                              |    1 +
 include/asm-ppc/processor.h                        |    9 +
 include/asm-ppc/u-boot.h                           |    1 +
 include/bcd.h                                      |   20 +
 include/common.h                                   |   10 +-
 include/configs/ADCIOP.h                           |    9 -
 include/configs/AP1000.h                           |    8 -
 include/configs/AR405.h                            |   10 -
 include/configs/ASH405.h                           |   10 -
 include/configs/CANBT.h                            |    9 -
 include/configs/CMS700.h                           |   10 -
 include/configs/CPCI2DP.h                          |   10 -
 include/configs/CPCI405.h                          |    9 -
 include/configs/CPCI4052.h                         |   10 -
 include/configs/CPCI405AB.h                        |   10 -
 include/configs/CPCI405DT.h                        |   10 -
 include/configs/CPCI440.h                          |    9 -
 include/configs/CPCIISER4.h                        |    9 -
 include/configs/CRAYL1.h                           |    6 -
 include/configs/DASA_SIM.h                         |    9 -
 include/configs/DP405.h                            |   10 -
 include/configs/DU405.h                            |    9 -
 include/configs/ERIC.h                             |    8 -
 include/configs/EXBITGEN.h                         |    4 -
 include/configs/G2000.h                            |   10 -
 include/configs/HH405.h                            |   10 -
 include/configs/HUB405.h                           |   10 -
 include/configs/JSE.h                              |    9 -
 include/configs/KAREF.h                            |    8 -
 include/configs/METROBOX.h                         |    8 -
 include/configs/MIP405.h                           |    9 -
 include/configs/ML2.h                              |    8 -
 include/configs/OCRTC.h                            |    9 -
 include/configs/ORSG.h                             |    9 -
 include/configs/PCI405.h                           |    9 -
 include/configs/PIP405.h                           |    9 -
 include/configs/PLU405.h                           |   10 -
 include/configs/PMC405.h                           |   10 -
 include/configs/PPChameleonEVB.h                   |   10 -
 include/configs/VOH405.h                           |   10 -
 include/configs/VOM405.h                           |   10 -
 include/configs/W7OLMC.h                           |    9 -
 include/configs/W7OLMG.h                           |    9 -
 include/configs/WUH405.h                           |   10 -
 include/configs/XPEDITE1K.h                        |    8 -
 include/configs/acadia.h                           |    9 -
 include/configs/alpr.h                             |    6 -
 include/configs/bamboo.h                           |    9 -
 include/configs/bubinga.h                          |    8 -
 include/configs/csb272.h                           |    8 -
 include/configs/csb472.h                           |    8 -
 include/configs/ebony.h                            |    8 -
 include/configs/hcu4.h                             |    7 -
 include/configs/hcu5.h                             |    7 -
 include/configs/katmai.h                           |   16 +-
 include/configs/kilauea.h                          |  525 +++++++++++
 include/configs/luan.h                             |    9 -
 include/configs/lwmon5.h                           |   11 +-
 include/configs/makalu.h                           |  399 +++++++++
 include/configs/ml300.h                            |    6 -
 include/configs/ocotea.h                           |    8 -
 include/configs/p3p440.h                           |    8 -
 include/configs/pcs440ep.h                         |   11 +-
 include/configs/sbc405.h                           |   10 -
 include/configs/sc3.h                              |   18 -
 include/configs/sequoia.h                          |   26 +-
 include/configs/taihu.h                            |   52 +-
 include/configs/taishan.h                          |    9 -
 include/configs/walnut.h                           |   10 -
 include/configs/yosemite.h                         |   18 +-
 include/configs/yucca.h                            |   14 +-
 include/configs/zeus.h                             |    7 -
 include/ppc405.h                                   |  932 +++++++++++++-------
 include/ppc440.h                                   |  123 +---
 include/ppc4xx.h                                   |   73 ++-
 include/ppc4xx_enet.h                              |   17 +-
 include/serial.h                                   |    5 +-
 lib_ppc/cache.c                                    |    2 +-
 nand_spl/board/amcc/acadia/Makefile                |    6 +-
 nand_spl/board/amcc/bamboo/sdram.c                 |    6 +
 nand_spl/board/amcc/kilauea/Makefile               |  108 +++
 nand_spl/board/amcc/kilauea/config.mk              |   47 +
 nand_spl/board/amcc/kilauea/u-boot.lds             |   64 ++
 post/cpu/ppc4xx/cache.c                            |    4 +
 post/cpu/ppc4xx/ether.c                            |   47 +-
 post/cpu/ppc4xx/uart.c                             |   15 +-
 post/lib_ppc/cpu.c                                 |   11 +
 rtc/Makefile                                       |    2 +-
 rtc/x1205.c                                        |  178 ++++
 207 files changed, 7050 insertions(+), 3004 deletions(-)
 create mode 100644 board/amcc/kilauea/Makefile
 create mode 100644 board/amcc/kilauea/cmd_pll.c
 create mode 100644 board/amcc/kilauea/config.mk
 create mode 100644 board/amcc/kilauea/init.S
 create mode 100644 board/amcc/kilauea/kilauea.c
 create mode 100644 board/amcc/kilauea/memory.c
 copy board/amcc/{yucca/u-boot.lds.debug => kilauea/u-boot-nand.lds} (72%)
 copy board/amcc/{yucca/u-boot.lds.debug => kilauea/u-boot.lds} (70%)
 create mode 100644 board/amcc/makalu/Makefile
 create mode 100644 board/amcc/makalu/cmd_pll.c
 create mode 100644 board/amcc/makalu/config.mk
 create mode 100644 board/amcc/makalu/init.S
 create mode 100644 board/amcc/makalu/makalu.c
 create mode 100644 board/amcc/makalu/memory.c
 rename board/amcc/{yucca/u-boot.lds.debug => makalu/u-boot.lds} (70%)
 delete mode 100644 cpu/ppc4xx/440spe_pcie.h
 rename cpu/ppc4xx/{405gp_pci.c => 4xx_pci.c} (98%)
 rename cpu/ppc4xx/{440spe_pcie.c => 4xx_pcie.c} (54%)
 rename cpu/ppc4xx/{serial.c => 4xx_uart.c} (56%)
 create mode 100644 cpu/ppc4xx/cache.S
 create mode 100644 cpu/ppc4xx/fdt.c
 create mode 100644 cpu/ppc4xx/iop480_uart.c
 rename include/{405gp_pci.h => asm-ppc/4xx_pci.h} (100%)
 create mode 100644 include/asm-ppc/4xx_pcie.h
 create mode 100644 include/bcd.h
 create mode 100644 include/configs/kilauea.h
 create mode 100644 include/configs/makalu.h
 create mode 100644 nand_spl/board/amcc/kilauea/Makefile
 create mode 100644 nand_spl/board/amcc/kilauea/config.mk
 create mode 100644 nand_spl/board/amcc/kilauea/u-boot.lds
 create mode 100644 rtc/x1205.c

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[gvb.uboot]

Stefan Roese wrote:
> Wolfgang, please pull the 4xx changes from the u-boot-ppc4xx master
> branch.
> 
> Unfortunately I couldn't create a complete list of changes as done
> usually, since I merge multiple times with mainline. Then
> "git-request-pull" isn't useful anymore to create a list of changes
> only present in the local repository. It creates a list of changes
> which also included patches from the mainline repo. Perhaps somebody else
> with more "git-knowledge" can help out here and tell me how to create
> such a git-shortlog which only includes the local changes.
> 
> Thanks.

Hi Stefan,

What I've been doing which works well is to create a local branch (i.e. 
no need to push back to denx.de) in my local repo named "uboot" (I 
removed the "-" in "u-boot" because I'm lazy and git makes you use "--" 
if there is a dash in the branch name).  I pull the u-boot mainline 
changes into this "uboot" branch and then rebase "master" against 
"uboot".  Note that this naming, pulling, and rebasing method can be 
extended to other sub-repos such as "uboottesting" or "ubootfdt" to 
maintain changes rebased against other sub-repos.

This prevents the intermixing of "official" patches and improvement 
patches which happens if you do a pull of u-boot repo directly into your 
"master" branch.

This is simply an inversion of my original method, which was to pull 
u-boot master changes into the "master" branch and keep improvements in 
a different branch ("merge") that I rebased against the "master" branch.

Time to update the Custodians page...

Best regards and have a great new year,
gvb

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200712310813.55920.sr@denx.de> you wrote:
>
> The following changes since commit 49801028715cd8bc22863cdfc0ee7919b7a6af4b:
>   Stefan Roese (1):
>         Merge git://www.denx.de/git/u-boot
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master

Merged. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The lesser of two evils -- is evil."             - Seymour (Sy) Leon

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 5c740711f0ea5b51414b341b71597c4a0751be74:
  Jon Loeliger (1):
        8610: Move include of config.h earlier.

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Larry Johnson (4):
      PPC4xx: Use common code for Sequoia board SDRAM support
      PPC4xx: Remove sdram.h from board/amcc/sequoia
      PPC4xx: Use common code for LWMON5 board SDRAM support
      PPC4xx: Remove sdram.h from board/lwmon5

Lawrence R. Johnson (3):
      ppc4xx: Add functionality to GPIO support
      ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
      ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board

Matthias Fuchs (3):
      ppc4xx: More cleanup for esd's LCD code
      ppc4xx: use common denali core defines and data eye search code for PMC440
      ppc4xx: Remove sdram.h from PMC440 board

Stefan Roese (1):
      ppc4xx: Fix Sequoia NAND booting target

 board/amcc/sequoia/sdram.c           |  344 +-----------------------
 board/amcc/sequoia/sdram.h           |  505 ----------------------------------
 board/amcc/sequoia/sequoia.c         |   31 +--
 board/esd/common/lcd.c               |   38 ++--
 board/esd/pmc440/sdram.c             |  342 +-----------------------
 board/esd/pmc440/sdram.h             |  505 ----------------------------------
 board/korat/korat.c                  |  117 +--------
 board/lwmon5/sdram.c                 |  357 ++-----------------------
 board/lwmon5/sdram.h                 |  505 ----------------------------------
 cpu/ppc4xx/gpio.c                    |   63 +++--
 include/asm-ppc/gpio.h               |    1 +
 include/configs/korat.h              |  153 ++++++++++-
 include/configs/sequoia.h            |   77 +++++
 nand_spl/board/amcc/sequoia/Makefile |    6 +-
 14 files changed, 333 insertions(+), 2711 deletions(-)
 delete mode 100644 board/amcc/sequoia/sdram.h
 delete mode 100644 board/esd/pmc440/sdram.h
 delete mode 100644 board/lwmon5/sdram.h

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 5c740711f0ea5b51414b341b71597c4a0751be74:
  Jon Loeliger (1):
        8610: Move include of config.h earlier.

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Larry Johnson (5):
      PPC4xx: Use common code for Sequoia board SDRAM support
      PPC4xx: Remove sdram.h from board/amcc/sequoia
      PPC4xx: Use common code for LWMON5 board SDRAM support
      PPC4xx: Remove sdram.h from board/lwmon5
      ppc4xx: Remove weak binding from common Denali data-eye search code

Lawrence R. Johnson (3):
      ppc4xx: Add functionality to GPIO support
      ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
      ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board

Matthias Fuchs (3):
      ppc4xx: More cleanup for esd's LCD code
      ppc4xx: use common denali core defines and data eye search code for PMC440
      ppc4xx: Remove sdram.h from PMC440 board

Stefan Roese (4):
      ppc4xx: Fix Sequoia NAND booting target
      ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
      ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
      Merge branch 'katmai-ddr-gda'

 board/amcc/katmai/katmai.c           |   14 +-
 board/amcc/sequoia/sdram.c           |  344 +-----------------------
 board/amcc/sequoia/sdram.h           |  505 ----------------------------------
 board/amcc/sequoia/sequoia.c         |   31 +--
 board/esd/common/lcd.c               |   38 ++--
 board/esd/pmc440/sdram.c             |  342 +-----------------------
 board/esd/pmc440/sdram.h             |  505 ----------------------------------
 board/korat/korat.c                  |  117 +--------
 board/lwmon5/sdram.c                 |  357 ++-----------------------
 board/lwmon5/sdram.h                 |  505 ----------------------------------
 cpu/ppc4xx/44x_spd_ddr2.c            |   96 +++----
 cpu/ppc4xx/denali_data_eye.c         |    7 -
 cpu/ppc4xx/gpio.c                    |   63 +++--
 include/asm-ppc/gpio.h               |    1 +
 include/configs/katmai.h             |    1 +
 include/configs/korat.h              |  153 ++++++++++-
 include/configs/sequoia.h            |   77 +++++
 include/ppc440.h                     |   12 +-
 nand_spl/board/amcc/sequoia/Makefile |    6 +-
 19 files changed, 394 insertions(+), 2780 deletions(-)
 delete mode 100644 board/amcc/sequoia/sdram.h
 delete mode 100644 board/esd/pmc440/sdram.h
 delete mode 100644 board/lwmon5/sdram.h

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200801051021.58236.sr@denx.de> you wrote:
> The following changes since commit 5c740711f0ea5b51414b341b71597c4a0751be74:
>   Jon Loeliger (1):
>         8610: Move include of config.h earlier.
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master

Done.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I am a computer. I am dumber than any human and smarter than any  ad-
ministrator.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 74ac5facb988fc488a707db228b177ead63a6541:
  Wolfgang Denk (1):
        Merge branch 'inka4x0-ng' of /home/m8/git/u-boot/

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Matthias Fuchs (5):
      ppc4xx: Disable error message when no NAND chip is installed on PMC440
      ppc4xx: Update PLB/PCI divider for PMC440 board
      ppc4xx: Fix UIC2 vector number base
      ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
      ppc4xx: assign PCI interrupts on seuqoia boards

Stefan Roese (6):
      ppc4xx: Return 0 on success in 4xx ethernet driver
      ppc4xx: Add 44x cache locking to better support init-ram in d-cache
      ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
      ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
      POST: Execute SPR test after relocation
      Merge branch 'lwmon5-no-ocm'

 board/amcc/sequoia/sequoia.c                       |   14 +++++
 board/esd/pmc440/cmd_pmc440.c                      |    4 +-
 board/lwmon5/init.S                                |    2 +-
 cpu/ppc4xx/4xx_enet.c                              |    7 ++-
 cpu/ppc4xx/4xx_uart.c                              |    2 +-
 cpu/ppc4xx/commproc.c                              |   14 +++++-
 cpu/ppc4xx/interrupts.c                            |    2 +-
 cpu/ppc4xx/iop480_uart.c                           |    2 +-
 cpu/ppc4xx/start.S                                 |   52 ++++++++++++++++++++
 cpu/ppc4xx/usbdev.c                                |    2 +-
 .../vecnum.h => include/asm-ppc/ppc4xx-intvec.h    |   32 ++++++------
 include/configs/PMC440.h                           |    3 +
 include/configs/lwmon5.h                           |   19 +++++---
 include/ppc440.h                                   |    4 +-
 post/tests.c                                       |    2 +-
 15 files changed, 123 insertions(+), 38 deletions(-)
 rename cpu/ppc4xx/vecnum.h => include/asm-ppc/ppc4xx-intvec.h (95%)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200801091101.14617.sr@denx.de> you wrote:
> The following changes since commit 74ac5facb988fc488a707db228b177ead63a6541:
>   Wolfgang Denk (1):
>         Merge branch 'inka4x0-ng' of /home/m8/git/u-boot/
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Matthias Fuchs (5):
>       ppc4xx: Disable error message when no NAND chip is installed on PMC440
>       ppc4xx: Update PLB/PCI divider for PMC440 board
>       ppc4xx: Fix UIC2 vector number base
>       ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
>       ppc4xx: assign PCI interrupts on seuqoia boards
> 
> Stefan Roese (6):
>       ppc4xx: Return 0 on success in 4xx ethernet driver
>       ppc4xx: Add 44x cache locking to better support init-ram in d-cache
>       ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
>       ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
>       POST: Execute SPR test after relocation
>       Merge branch 'lwmon5-no-ocm'

Done.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
KLB is an acronym for `Known Lazy Bastard', aka non-FAQ  reader,  aka
person  who  would  rather  make  someone  take their time to explain
something basic than look it up in a  FAQ.
         -- Tom Christiansen in <6aq547$mnr$2@csnews.cs.colorado.edu>

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Larry Johnson]

Stefan Roese wrote:
> The following changes since commit 74ac5facb988fc488a707db228b177ead63a6541:
>   Wolfgang Denk (1):
>         Merge branch 'inka4x0-ng' of /home/m8/git/u-boot/
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Matthias Fuchs (5):
>       ppc4xx: Disable error message when no NAND chip is installed on PMC440
>       ppc4xx: Update PLB/PCI divider for PMC440 board
>       ppc4xx: Fix UIC2 vector number base
>       ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
>       ppc4xx: assign PCI interrupts on seuqoia boards
> 
> Stefan Roese (6):
>       ppc4xx: Return 0 on success in 4xx ethernet driver
>       ppc4xx: Add 44x cache locking to better support init-ram in d-cache
>       ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
>       ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
>       POST: Execute SPR test after relocation
>       Merge branch 'lwmon5-no-ocm'
> 
>  board/amcc/sequoia/sequoia.c                       |   14 +++++
>  board/esd/pmc440/cmd_pmc440.c                      |    4 +-
>  board/lwmon5/init.S                                |    2 +-
>  cpu/ppc4xx/4xx_enet.c                              |    7 ++-
>  cpu/ppc4xx/4xx_uart.c                              |    2 +-
>  cpu/ppc4xx/commproc.c                              |   14 +++++-
>  cpu/ppc4xx/interrupts.c                            |    2 +-
>  cpu/ppc4xx/iop480_uart.c                           |    2 +-
>  cpu/ppc4xx/start.S                                 |   52 ++++++++++++++++++++
>  cpu/ppc4xx/usbdev.c                                |    2 +-
>  .../vecnum.h => include/asm-ppc/ppc4xx-intvec.h    |   32 ++++++------
>  include/configs/PMC440.h                           |    3 +
>  include/configs/lwmon5.h                           |   19 +++++---
>  include/ppc440.h                                   |    4 +-
>  post/tests.c                                       |    2 +-
>  15 files changed, 123 insertions(+), 38 deletions(-)
>  rename cpu/ppc4xx/vecnum.h => include/asm-ppc/ppc4xx-intvec.h (95%)
 

Hi Stefan,

Are the changes for LWMON5 recommended for Sequoia and other 440EPx
boards?

BTW, I tried to check to see if these patches had been posted to the
mailing list.  For some reason, the mailing-list archive at
sourceforge.net, but it doesn't appear to have any postings after
17 December.

Best regards,
Larry

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

Hi Larry,

On Wednesday 09 January 2008, Larry Johnson wrote:
> Are the changes for LWMON5 recommended for Sequoia and other 440EPx
> boards?

No. It's a special case, where we need the OCM for the logbuffer.

> BTW, I tried to check to see if these patches had been posted to the
> mailing list.

Ahh, bad habit. Sorry, but most of the time I forget to send internal 4xx 
patches to the list. I'll try to change this and send the patches to the list 
too.

> For some reason, the mailing-list archive at 
> sourceforge.net, but it doesn't appear to have any postings after
> 17 December.

No idea. I have not looked at sourceforge for a long time.

The changes are already present in the official U-Boot repository. You can 
take a look at them there.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Jerry Van Baren]

Larry Johnson wrote:

[snip]

> BTW, I tried to check to see if these patches had been posted to the
> mailing list.  For some reason, the mailing-list archive at
> sourceforge.net, but it doesn't appear to have any postings after
> 17 December.
> 
> Best regards,
> Larry

Hi Larry,

FWIIW, I generally use gmane.org to search the mail list.  Sourceforge 
tends to be slow and lame when it isn't actually broken.
   <http://dir.gmane.org/gmane.comp.boot-loaders.u-boot>

Best regards,
gvb

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit fe891ecf4d187e9d11dde869ed4623af52b54451:
  Hiroshi Ito (1):
        NFS Timeout with large files.

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Larry Johnson (1):
      ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code

Niklaus Giger (1):
      ppc4xx: HCU4/5. Fix make O=../xx

Stefan Roese (4):
      ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
      ppc4xx: Fix GPIO configuration for pcs440ep
      ppc4xx: Fix ndfc HW ECC byte order
      Merge branch 'for-1.3.2'

 Makefile                     |    2 ++
 board/netstal/hcu4/Makefile  |   12 ++++--------
 board/netstal/hcu5/Makefile  |   10 ++++------
 board/pcs440ep/pcs440ep.c    |    2 +-
 cpu/ppc4xx/denali_spd_ddr2.c |    6 +++---
 cpu/ppc4xx/ndfc.c            |    4 ++--
 cpu/ppc4xx/start.S           |    4 ++++
 include/configs/pcs440ep.h   |    2 +-
 include/configs/yosemite.h   |    2 +-
 9 files changed, 22 insertions(+), 22 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200802141155.38386.sr@denx.de> you wrote:
> The following changes since commit fe891ecf4d187e9d11dde869ed4623af52b54451:
>   Hiroshi Ito (1):
>         NFS Timeout with large files.
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Larry Johnson (1):
>       ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
> 
> Niklaus Giger (1):
>       ppc4xx: HCU4/5. Fix make O=../xx
> 
> Stefan Roese (4):
>       ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
>       ppc4xx: Fix GPIO configuration for pcs440ep
>       ppc4xx: Fix ndfc HW ECC byte order
>       Merge branch 'for-1.3.2'

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The complexity of software is an essential property, not an  acciden-
tal  one. Hence, descriptions of a software entity that abstract away
its complexity often abstract away its essence.    - Fred Brooks, Jr.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 5db6138565ad4da190f94e0bc1d89407d58a2ab2:
  Wolfgang Denk (1):
        Merge branch 'master' of git://www.denx.de/git/u-boot-arm

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Larry Johnson (1):
      ppc4xx: Beautify configuration files for Sequoia and Korat boards

Mike Nuss (1):
      PPC440EPx: Optionally enable second I2C bus

Niklaus Giger (3):
      ppc4xx: PPC405GPr fix missing register definitions
      ppc4xx: HCU4/5. Cleanups
      ppc4xx: HCU4/5. Cleanup configs

 board/amcc/sequoia/sequoia.c       |    5 +-
 board/netstal/common/fixed_sdram.c |    2 +-
 board/netstal/common/hcu_flash.c   |   14 --
 board/netstal/common/nm.h          |   11 ++-
 board/netstal/common/nm_bsp.c      |    4 +-
 board/netstal/hcu4/hcu4.c          |   80 ++++++-------
 board/netstal/hcu5/hcu5.c          |    8 +-
 board/netstal/hcu5/sdram.c         |   32 +++--
 include/configs/hcu4.h             |   26 ++---
 include/configs/hcu5.h             |   47 +++----
 include/configs/korat.h            |  234 ++++++++++++++++++-----------------
 include/configs/sequoia.h          |  238 ++++++++++++++++++------------------
 include/ppc405.h                   |    8 ++
 13 files changed, 346 insertions(+), 363 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200802160711.39228.sr@denx.de> you wrote:
> The following changes since commit 5db6138565ad4da190f94e0bc1d89407d58a2ab2:
>   Wolfgang Denk (1):
>         Merge branch 'master' of git://www.denx.de/git/u-boot-arm
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Larry Johnson (1):
>       ppc4xx: Beautify configuration files for Sequoia and Korat boards
> 
> Mike Nuss (1):
>       PPC440EPx: Optionally enable second I2C bus
> 
> Niklaus Giger (3):
>       ppc4xx: PPC405GPr fix missing register definitions
>       ppc4xx: HCU4/5. Cleanups
>       ppc4xx: HCU4/5. Cleanup configs

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
This cultural mystique surrounding the  biological  function  --  you
realize humans are overly preoccupied with the subject.
	-- Kelinda the Kelvan, "By Any Other Name", stardate 4658.9

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6:
  Yuri Tikhonov (1):
        Fix CPU POST test failure

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Michael Schwingen (1):
      CFI: Do not use uninitialized cmd_reset

 drivers/mtd/cfi_flash.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

In message <200802211719.46425.sr@denx.de> you wrote:
> The following changes since commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6:
>   Yuri Tikhonov (1):
>         Fix CPU POST test failure
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master
> 
> Michael Schwingen (1):
>       CFI: Do not use uninitialized cmd_reset
> 
>  drivers/mtd/cfi_flash.c |    7 ++++++-
>  1 files changed, 6 insertions(+), 1 deletions(-)

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Our business is run on trust.  We trust you will pay in advance.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit b29661fc1151077776454288051bc9a488351ce8:
  Wolfgang Denk (1):
        Coding style cleanup. Prepare v1.3.2-rc2 release candidate

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Stefan Roese (1):
      ppc4xx: Fix acadia_nand build problem

 board/amcc/acadia/memory.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200802251652.35255.sr@denx.de> you wrote:
> The following changes since commit b29661fc1151077776454288051bc9a488351ce8:
>   Wolfgang Denk (1):
>         Coding style cleanup. Prepare v1.3.2-rc2 release candidate
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Stefan Roese (1):
>       ppc4xx: Fix acadia_nand build problem
> 
>  board/amcc/acadia/memory.c |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Politician:  An  eel  in  the  fundamental   mud   upon   which   the
superstructure  of  organized  society is reared. When he wriggles he
mistakes the agitation of his tail for the trembling of the  edifice.
As  compared with the statesman, he suffers the disadvantage of being
alive.                                               - Ambrose Bierce

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 848e03110c0facf3800ea15fdc38e505248ee282:
  Stefan Roese (1):
        Merge branch 'master' of /home/stefan/git/u-boot/u-boot

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Markus Brunner (1):
      fix taihu soft spi_read

Stefan Roese (1):
      ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables

 board/amcc/taihu/taihu.c  |    2 +-
 include/configs/sequoia.h |   24 +++++++++++++++++-------
 2 files changed, 18 insertions(+), 8 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200803070923.05639.sr@denx.de> you wrote:
> The following changes since commit 848e03110c0facf3800ea15fdc38e505248ee282:
>   Stefan Roese (1):
>         Merge branch 'master' of /home/stefan/git/u-boot/u-boot
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Markus Brunner (1):
>       fix taihu soft spi_read
> 
> Stefan Roese (1):
>       ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
> 
>  board/amcc/taihu/taihu.c  |    2 +-
>  include/configs/sequoia.h |   24 +++++++++++++++++-------
>  2 files changed, 18 insertions(+), 8 deletions(-)

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Don't hit a man when he's down - kick him; it's easier.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0:
  Wolfgang Denk (1):
        tools/setlocalversion: use a git-describe-ish format

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Niklaus Giger (5):
      ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
      ppc4xx: HCU4/5. remove obsolete hcu_flash.c
      ppc4xx: Add 405GPr based MCU25 board. Global files
      ppc4xx: Add 405GPr based MCU25 board config file
      ppc4xx: Add 405GPr based MCU25 board specific files

Stefan Roese (16):
      ppc4xx: Fix comment in 405EX DDR2 init code
      rtc: Add M41T62 support
      ppc4xx: miiphy.c reworked
      ppc4xx: program_tlb now uses 64bit physical addess
      ppc4xx: interrupt.c reworked
      ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
      ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
      ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
      ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
      ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
      ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
      ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
      ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
      ppc4xx: Add Canyonlands NAND booting support
      usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
      ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board

 MAINTAINERS                                  |    2 +
 MAKEALL                                      |    3 +
 Makefile                                     |   15 +
 board/amcc/canyonlands/Makefile              |   52 +++
 board/amcc/canyonlands/bootstrap.c           |  170 ++++++++
 board/amcc/canyonlands/canyonlands.c         |  418 ++++++++++++++++++
 board/amcc/canyonlands/config.mk             |   49 +++
 board/amcc/canyonlands/init.S                |  122 ++++++
 board/amcc/canyonlands/u-boot-nand.lds       |  137 ++++++
 board/amcc/canyonlands/u-boot.lds            |  146 +++++++
 board/amcc/kilauea/init.S                    |    4 +-
 board/amcc/makalu/init.S                     |    4 +-
 board/netstal/common/hcu_flash.c             |  514 ----------------------
 board/netstal/hcu4/Makefile                  |    2 +-
 board/netstal/hcu4/hcu4.c                    |   16 +
 board/netstal/hcu5/Makefile                  |    2 +-
 board/netstal/hcu5/hcu5.c                    |   16 +
 board/netstal/hcu5/sdram.c                   |    2 -
 board/netstal/mcu25/Makefile                 |   51 +++
 board/netstal/mcu25/README.txt               |   60 +++
 board/netstal/mcu25/config.mk                |   29 ++
 board/netstal/mcu25/mcu25.c                  |  218 ++++++++++
 board/netstal/mcu25/u-boot.lds               |  141 ++++++
 cpu/ppc4xx/44x_spd_ddr2.c                    |   41 ++-
 cpu/ppc4xx/4xx_enet.c                        |  369 +++++++++++++---
 cpu/ppc4xx/4xx_pci.c                         |    9 +-
 cpu/ppc4xx/4xx_pcie.c                        |  203 +++++++++-
 cpu/ppc4xx/4xx_uart.c                        |   24 +-
 cpu/ppc4xx/cpu.c                             |   45 ++-
 cpu/ppc4xx/cpu_init.c                        |    1 +
 cpu/ppc4xx/interrupts.c                      |  589 ++++++-------------------
 cpu/ppc4xx/miiphy.c                          |  196 ++++-----
 cpu/ppc4xx/ndfc.c                            |    3 +-
 cpu/ppc4xx/speed.c                           |  125 ++++++-
 cpu/ppc4xx/start.S                           |   19 +-
 cpu/ppc4xx/tlb.c                             |   27 +-
 drivers/rtc/Makefile                         |    1 +
 drivers/rtc/m41t62.c                         |  135 ++++++
 drivers/usb/usb_ohci.c                       |    5 +-
 include/405_mal.h                            |    1 +
 include/4xx_i2c.h                            |    3 +-
 include/asm-ppc/4xx_pcie.h                   |   79 ++++-
 include/asm-ppc/gpio.h                       |    5 +-
 include/asm-ppc/mmu.h                        |   18 +-
 include/asm-ppc/ppc4xx-intvec.h              |   71 +++
 include/asm-ppc/processor.h                  |    4 +
 include/asm-ppc/u-boot.h                     |    6 +-
 include/common.h                             |    4 +-
 include/configs/canyonlands.h                |  567 ++++++++++++++++++++++++
 include/configs/hcu4.h                       |   18 +-
 include/configs/hcu5.h                       |   14 +-
 include/configs/mcu25.h                      |  362 ++++++++++++++++
 include/ppc405.h                             |   23 +-
 include/ppc440.h                             |  593 ++++++++++++++++++++++----
 include/ppc4xx_enet.h                        |   18 +-
 nand_spl/board/amcc/canyonlands/Makefile     |  105 +++++
 nand_spl/board/amcc/canyonlands/config.mk    |   49 +++
 nand_spl/board/amcc/canyonlands/ddr2_fixed.c |   96 +++++
 nand_spl/board/amcc/canyonlands/u-boot.lds   |   65 +++
 post/cpu/ppc4xx/cache.c                      |    2 -
 60 files changed, 4740 insertions(+), 1328 deletions(-)
 create mode 100644 board/amcc/canyonlands/Makefile
 create mode 100644 board/amcc/canyonlands/bootstrap.c
 create mode 100644 board/amcc/canyonlands/canyonlands.c
 create mode 100644 board/amcc/canyonlands/config.mk
 create mode 100644 board/amcc/canyonlands/init.S
 create mode 100644 board/amcc/canyonlands/u-boot-nand.lds
 create mode 100644 board/amcc/canyonlands/u-boot.lds
 delete mode 100644 board/netstal/common/hcu_flash.c
 create mode 100644 board/netstal/mcu25/Makefile
 create mode 100644 board/netstal/mcu25/README.txt
 create mode 100644 board/netstal/mcu25/config.mk
 create mode 100644 board/netstal/mcu25/mcu25.c
 create mode 100644 board/netstal/mcu25/u-boot.lds
 create mode 100644 drivers/rtc/m41t62.c
 create mode 100644 include/configs/canyonlands.h
 create mode 100644 include/configs/mcu25.h
 create mode 100644 nand_spl/board/amcc/canyonlands/Makefile
 create mode 100644 nand_spl/board/amcc/canyonlands/config.mk
 create mode 100644 nand_spl/board/amcc/canyonlands/ddr2_fixed.c
 create mode 100644 nand_spl/board/amcc/canyonlands/u-boot.lds

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200803150800.56448.sr@denx.de> you wrote:
> The following changes since commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0:
>   Wolfgang Denk (1):
>         tools/setlocalversion: use a git-describe-ish format
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master

Well, but:

...
> Stefan Roese (16):
>       ppc4xx: Fix comment in 405EX DDR2 init code
>       rtc: Add M41T62 support
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This is NOT a ppc4xx related patch. You are NOT supposed to sneak this
in through your ppc4xx custodian repo.

>       ppc4xx: miiphy.c reworked
>       ppc4xx: program_tlb now uses 64bit physical addess
>       ppc4xx: interrupt.c reworked
>       ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
>       ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
>       ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
>       ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
>       ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
>       ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
>       ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
>       ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
>       ppc4xx: Add Canyonlands NAND booting support
>       usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This is a USB related patch. You are supposed to run this through the
USB custodian. 


Done, but for the future please don't add unrelated changes  to  your
custodian repo.  Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Bus error -- please leave by the rear door.

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit 23e20aa6488e6c0622496549861bfdc74108debe:
  Yuri Tikhonov (1):
        lwmon5: Fix register test logic to match the specific GDC h/w.

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Jerry Van Baren (1):
      Flash programming progress countdown.

Stefan Roese (1):
      CFI: Small cleanup for FLASH_SHOW_PROGRESS

 README                  |    5 +++++
 drivers/mtd/cfi_flash.c |   40 +++++++++++++++++++++++++++++++++++++++-
 2 files changed, 44 insertions(+), 1 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

In message <200803191346.44756.sr@denx.de> you wrote:
> The following changes since commit 23e20aa6488e6c0622496549861bfdc74108debe:
>   Yuri Tikhonov (1):
>         lwmon5: Fix register test logic to match the specific GDC h/w.
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master
> 
> Jerry Van Baren (1):
>       Flash programming progress countdown.
> 
> Stefan Roese (1):
>       CFI: Small cleanup for FLASH_SHOW_PROGRESS

Done. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
FORTRAN? The syntactically incorrect statement "DO 10 I = 1.10"  will
parse  and  generate  code  creating  a  variable, DO10I, as follows:
"DO10I = 1.10" If that doesn't terrify you, it should.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 234ea73c660cfd0b1c98de00995c32d4152d202f:
  Wolfgang Denk (1):
        Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Larry Johnson (1):
      ppc4xx: Updates to Korat-specific code

Markus Brunner (1):
      ppc4xx: PPC405EP Set EMAC noise filter bits

Mike Nuss (1):
      ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx

Pieter Voorthuijsen (1):
      ppc4xx: Enable cache support on the ALPR board

Stefan Roese (9):
      ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
      ppc4xx: Add AMCC Glacier 406GT eval board support
      ppc4xx: Fix compilation warning in 4xx_enet.c
      ppc4xx: Correctly pass phyiscal FLASH base address into dtb
      ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
      ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
      ppc4xx: Add fdt support to Prodrive alpr
      ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
      ppc4xx: Enable ECC on LWMON5

 MAINTAINERS                          |    1 +
 MAKEALL                              |    1 +
 Makefile                             |    9 +-
 README                               |   21 +++
 board/amcc/canyonlands/canyonlands.c |   27 +++--
 board/amcc/canyonlands/u-boot.lds    |    2 -
 board/korat/config.mk                |   16 ++-
 board/korat/init.S                   |   31 ++++--
 board/korat/korat.c                  |  232 ++++++++++++++++++++++++++++------
 board/korat/u-boot-F7FC.lds          |  143 +++++++++++++++++++++
 board/lwmon5/sdram.c                 |   90 +++----------
 board/prodrive/alpr/alpr.c           |   25 ++++-
 board/prodrive/alpr/init.S           |    9 ++
 cpu/ppc4xx/4xx_enet.c                |   56 ++++++++-
 cpu/ppc4xx/cpu_init.c                |  102 +++++++++++++++-
 cpu/ppc4xx/interrupts.c              |    7 +-
 doc/README.korat                     |   51 ++++++++
 include/configs/alpr.h               |   14 ++-
 include/configs/canyonlands.h        |  125 +++++++++++++++++--
 include/configs/korat.h              |   67 +++++++----
 include/configs/lwmon5.h             |    8 +-
 include/configs/sequoia.h            |    4 +-
 include/ppc440.h                     |    4 +
 include/ppc4xx_enet.h                |    4 +
 lib_ppc/board.c                      |   17 +++
 25 files changed, 877 insertions(+), 189 deletions(-)
 create mode 100644 board/korat/u-boot-F7FC.lds
 create mode 100644 doc/README.korat

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit 74d1e66d22dac91388bc538b2fe19f735edc5b82:
  Bartlomiej Sieka (1):
        Fix host tool build breakage, take two

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Tor Krill (1):
      MTD/CFI: Add support for 16bit legacy AMD flash

 drivers/mtd/cfi_flash.c   |   44 +++++++++++++++++++++++++++++++++++---------
 drivers/mtd/jedec_flash.c |   19 +++++++++++++++++++
 2 files changed, 54 insertions(+), 9 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit 74d1e66d22dac91388bc538b2fe19f735edc5b82:
  Bartlomiej Sieka (1):
        Fix host tool build breakage, take two

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Daniel Hellstrom (1):
      MTD/CFI: flash_read64 is defined a weak function (for SPARC)

Tor Krill (1):
      MTD/CFI: Add support for 16bit legacy AMD flash

 drivers/mtd/cfi_flash.c   |   48 +++++++++++++++++++++++++++++++++++---------
 drivers/mtd/jedec_flash.c |   19 +++++++++++++++++
 2 files changed, 57 insertions(+), 10 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

In message <200803290654.45312.sr@denx.de> you wrote:
> The following changes since commit 74d1e66d22dac91388bc538b2fe19f735edc5b82:
>   Bartlomiej Sieka (1):
>         Fix host tool build breakage, take two
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master
> 
> Daniel Hellstrom (1):
>       MTD/CFI: flash_read64 is defined a weak function (for SPARC)
> 
> Tor Krill (1):
>       MTD/CFI: Add support for 16bit legacy AMD flash
> 
>  drivers/mtd/cfi_flash.c   |   48 +++++++++++++++++++++++++++++++++++---------
>  drivers/mtd/jedec_flash.c |   19 +++++++++++++++++
>  2 files changed, 57 insertions(+), 10 deletions(-)

Merged, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"'Tis true, 'tis pity, and pity 'tis 'tis true."
    - Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 234ea73c660cfd0b1c98de00995c32d4152d202f:
  Wolfgang Denk (1):
        Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master


Wolgang, this is an update for the last pull-request with some addional patches
applied. Thanks.


Larry Johnson (2):
      ppc4xx: Updates to Korat-specific code
      ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup

Markus Brunner (1):
      ppc4xx: PPC405EP Set EMAC noise filter bits

Matthias Fuchs (3):
      ppc4xx: Minor updates for DU440 boards
      ppc4xx: Add ptm configuration variables for PMC440
      ppc4xx: Cleanup PMC440 board support

Mike Nuss (1):
      ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx

Pieter Voorthuijsen (1):
      ppc4xx: Enable cache support on the ALPR board

Stefan Roese (12):
      ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
      ppc4xx: Add AMCC Glacier 406GT eval board support
      ppc4xx: Fix compilation warning in 4xx_enet.c
      ppc4xx: Correctly pass phyiscal FLASH base address into dtb
      ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
      ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
      ppc4xx: Add fdt support to Prodrive alpr
      ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
      ppc4xx: Enable ECC on LWMON5
      ppc: Small change to CFG_MEM_TOP_HIDE description
      ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
      ppc4xx: Small whitespace fix of esd patches

 MAINTAINERS                          |    1 +
 MAKEALL                              |    1 +
 Makefile                             |    9 +-
 README                               |   21 +++
 board/amcc/canyonlands/canyonlands.c |   69 ++++++--
 board/amcc/canyonlands/u-boot.lds    |    2 -
 board/esd/du440/du440.c              |    5 +-
 board/esd/du440/du440.h              |    1 +
 board/esd/pmc440/cmd_pmc440.c        |   53 +++---
 board/esd/pmc440/pmc440.c            |  313 +++++++++++++++++-----------------
 board/korat/config.mk                |   16 ++-
 board/korat/init.S                   |   31 +++-
 board/korat/korat.c                  |  232 ++++++++++++++++++++-----
 board/korat/u-boot-F7FC.lds          |  143 ++++++++++++++++
 board/lwmon5/sdram.c                 |   90 +++--------
 board/prodrive/alpr/alpr.c           |   25 +++-
 board/prodrive/alpr/init.S           |    9 +
 cpu/ppc4xx/4xx_enet.c                |   56 ++++++-
 cpu/ppc4xx/cpu_init.c                |  102 +++++++++++-
 cpu/ppc4xx/denali_spd_ddr2.c         |   27 ++--
 cpu/ppc4xx/interrupts.c              |    7 +-
 doc/README.korat                     |   51 ++++++
 include/configs/DU440.h              |   16 +-
 include/configs/alpr.h               |   14 ++-
 include/configs/canyonlands.h        |  126 +++++++++++++--
 include/configs/korat.h              |   67 +++++---
 include/configs/lwmon5.h             |    8 +-
 include/configs/sequoia.h            |    4 +-
 include/ppc440.h                     |    4 +
 include/ppc4xx_enet.h                |    4 +
 lib_ppc/board.c                      |   17 ++
 31 files changed, 1127 insertions(+), 397 deletions(-)
 create mode 100644 board/korat/u-boot-F7FC.lds
 create mode 100644 doc/README.korat

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200803311228.55346.sr@denx.de> you wrote:
> The following changes since commit 234ea73c660cfd0b1c98de00995c32d4152d202f:
>   Wolfgang Denk (1):
>         Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> 
> Wolgang, this is an update for the last pull-request with some addional patches
> applied. Thanks.

Merged, thanks!

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Each honest calling, each walk of life, has its own  elite,  its  own
aristocracy based on excellence of performance. - James Bryant Conant

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit aeff6d503b6006573d5c6b04fc658a64bebee5fa:
  Wolfgang Denk (1):
        Merge branch 'master' of git://www.denx.de/git/u-boot-fdt

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Stefan Roese (2):
      ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
      ppc4xx: Fix Canyonlands default environment to work with new image support

 include/configs/canyonlands.h |   12 +++++-------
 lib_ppc/board.c               |    2 +-
 2 files changed, 6 insertions(+), 8 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit aeff6d503b6006573d5c6b04fc658a64bebee5fa:
  Wolfgang Denk (1):
        Merge branch 'master' of git://www.denx.de/git/u-boot-fdt

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Eugene O'Brien (1):
      ppc4xx: Fix power mgt definitions for PPC440

Stefan Roese (3):
      ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
      ppc4xx: Fix Canyonlands default environment to work with new image support
      ppc4xx: Update Kilauea defconfig to use device-tree booting as default

 include/configs/canyonlands.h |   12 +++++-------
 include/configs/kilauea.h     |   27 ++++++++++++++++-----------
 include/ppc440.h              |    9 +--------
 lib_ppc/board.c               |    2 +-
 4 files changed, 23 insertions(+), 27 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit 950a392464e616b4590bc4501be46e2d7d162dea:
  Wolfgang Denk (1):
        Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Guennadi Liakhovetski (1):
      cfi_flash: Support buffered writes on non-standard Spansion NOR flash

 README                  |    7 +++++++
 drivers/mtd/cfi_flash.c |   46 ++++++++++++++++------------------------------
 2 files changed, 23 insertions(+), 30 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

In message <200804120902.15311.sr@denx.de> you wrote:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master
> 
> Guennadi Liakhovetski (1):
>       cfi_flash: Support buffered writes on non-standard Spansion NOR flash

Applied. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are no data that cannot be plotted on a straight  line  if  the
axis are chosen correctly.

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848:
  Stefan Roese (1):
        ppc4xx: Remove double defines in lwmon5.h

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Matthias Fuchs (1):
      cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST

 drivers/mtd/cfi_flash.c |   17 +++++++++++++++++
 1 files changed, 17 insertions(+), 0 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

In message <200804251555.58837.sr@denx.de> you wrote:
> The following changes since commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848:
>   Stefan Roese (1):
>         ppc4xx: Remove double defines in lwmon5.h
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master
> 
> Matthias Fuchs (1):
>       cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
> 
>  drivers/mtd/cfi_flash.c |   17 +++++++++++++++++
>  1 files changed, 17 insertions(+), 0 deletions(-)

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
He had quite a powerful intellect, but it  was  as  powerful  like  a
locomotive,  and  ran on rails and was therefore almost impossible to
steer.                          - Terry Pratchett, _Lords and Ladies_

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200804111649.37273.sr@denx.de> you wrote:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Eugene O'Brien (1):
>       ppc4xx: Fix power mgt definitions for PPC440
> 
> Stefan Roese (3):
>       ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
>       ppc4xx: Fix Canyonlands default environment to work with new image support
>       ppc4xx: Update Kilauea defconfig to use device-tree booting as default

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Anarchy may not be the best form of government, but it's better  than
no government at all.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
  Anatolij Gustschin (1):
        Fix crash on sequoia in ppc_4xx_eth_init

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Stefan Roese (4):
      ppc4xx: Add Glacier NAND booting target
      ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
      ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
      ppc4xx: Add dcache_enable() for 440

 Makefile                                     |    5 ++++-
 board/amcc/canyonlands/bootstrap.c           |   13 +++++++++++++
 board/amcc/canyonlands/init.S                |    1 +
 board/amcc/canyonlands/u-boot-nand.lds       |    4 ++--
 cpu/ppc4xx/cache.S                           |    2 ++
 include/configs/canyonlands.h                |   26 ++++++++++++++++----------
 nand_spl/board/amcc/canyonlands/config.mk    |    6 +++---
 nand_spl/board/amcc/canyonlands/ddr2_fixed.c |    8 ++++----
 8 files changed, 45 insertions(+), 20 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
  Anatolij Gustschin (1):
        Fix crash on sequoia in ppc_4xx_eth_init

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Matthias Fuchs (9):
      ppc4xx: Fix sys_get_info() for 405GP(r)
      ppc4xx: Update bootlogo for APC405 boards
      ppc4xx: Update FPGA image for APC405 boards
      ppc4xx: Update esd's common LCD code for 405 boards
      ppc4xx: update esd's common auto_update code for 405 boards
      ppc4xx: Update APC405 board support
      ppc4xx: Update APC405 configuration
      ppc4xx: Remove unused APC405 strataflash driver
      ppc4xx: Update CPU strapping for PMC440 boards

Stefan Roese (6):
      ppc4xx: Add Glacier NAND booting target
      ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
      ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
      ppc4xx: Add dcache_enable() for 440
      ppc4xx: Small coding style cleanup for the latest esd patches
      ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage

 Makefile                                     |    5 +-
 board/amcc/canyonlands/bootstrap.c           |   13 +
 board/amcc/canyonlands/init.S                |    1 +
 board/amcc/canyonlands/u-boot-nand.lds       |    4 +-
 board/esd/apc405/Makefile                    |    4 +-
 board/esd/apc405/apc405.c                    |  360 ++-
 board/esd/apc405/fpgadata.c                  | 4284 ++++++++++++--------------
 board/esd/apc405/logo_640_480_24bpp.c        |  800 ++++--
 board/esd/apc405/strataflash.c               |  789 -----
 board/esd/common/auto_update.c               |  208 +-
 board/esd/common/auto_update.h               |   15 +-
 board/esd/common/lcd.c                       |  123 +-
 board/esd/common/s1d13505_640_480_16bpp.h    |   65 +
 board/esd/pmc440/cmd_pmc440.c                |   13 +-
 cpu/ppc4xx/cache.S                           |    2 +
 cpu/ppc4xx/speed.c                           |    2 +
 include/configs/APC405.h                     |  346 ++-
 include/configs/canyonlands.h                |   49 +-
 nand_spl/board/amcc/canyonlands/config.mk    |    6 +-
 nand_spl/board/amcc/canyonlands/ddr2_fixed.c |    8 +-
 20 files changed, 3320 insertions(+), 3777 deletions(-)
 delete mode 100644 board/esd/apc405/strataflash.c
 create mode 100644 board/esd/common/s1d13505_640_480_16bpp.h

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200804221551.06813.sr@denx.de> you wrote:
> The following changes since commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
>   Anatolij Gustschin (1):
>         Fix crash on sequoia in ppc_4xx_eth_init
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Matthias Fuchs (9):
>       ppc4xx: Fix sys_get_info() for 405GP(r)
>       ppc4xx: Update bootlogo for APC405 boards
>       ppc4xx: Update FPGA image for APC405 boards
>       ppc4xx: Update esd's common LCD code for 405 boards
>       ppc4xx: update esd's common auto_update code for 405 boards
>       ppc4xx: Update APC405 board support
>       ppc4xx: Update APC405 configuration
>       ppc4xx: Remove unused APC405 strataflash driver
>       ppc4xx: Update CPU strapping for PMC440 boards
> 
> Stefan Roese (6):
>       ppc4xx: Add Glacier NAND booting target
>       ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
>       ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
>       ppc4xx: Add dcache_enable() for 440
>       ppc4xx: Small coding style cleanup for the latest esd patches
>       ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
> 
>  Makefile                                     |    5 +-
>  board/amcc/canyonlands/bootstrap.c           |   13 +
>  board/amcc/canyonlands/init.S                |    1 +
>  board/amcc/canyonlands/u-boot-nand.lds       |    4 +-
>  board/esd/apc405/Makefile                    |    4 +-
>  board/esd/apc405/apc405.c                    |  360 ++-
>  board/esd/apc405/fpgadata.c                  | 4284 ++++++++++++--------------
>  board/esd/apc405/logo_640_480_24bpp.c        |  800 ++++--
>  board/esd/apc405/strataflash.c               |  789 -----
>  board/esd/common/auto_update.c               |  208 +-
>  board/esd/common/auto_update.h               |   15 +-
>  board/esd/common/lcd.c                       |  123 +-
>  board/esd/common/s1d13505_640_480_16bpp.h    |   65 +
>  board/esd/pmc440/cmd_pmc440.c                |   13 +-
>  cpu/ppc4xx/cache.S                           |    2 +
>  cpu/ppc4xx/speed.c                           |    2 +
>  include/configs/APC405.h                     |  346 ++-
>  include/configs/canyonlands.h                |   49 +-
>  nand_spl/board/amcc/canyonlands/config.mk    |    6 +-
>  nand_spl/board/amcc/canyonlands/ddr2_fixed.c |    8 +-
>  20 files changed, 3320 insertions(+), 3777 deletions(-)
>  delete mode 100644 board/esd/apc405/strataflash.c
>  create mode 100644 board/esd/common/s1d13505_640_480_16bpp.h

Done, Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
NEW GRAND UNIFIED THEORY DISCLAIMER: The Manufacturer May Technically
Be Entitled to Claim That This Product Is  Ten-Dimensional.  However,
the  Consumer Is Reminded That This Confers No Legal Rights Above and
Beyond Those Applicable to Three-Dimensional Objects, Since the Seven
New Dimensions Are "Rolled Up" into Such a  Small  "Area"  That  They
Cannot Be Detected.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 58c5376ba67767ee684069d43e7f747a5d9ae8ed:
  Wolfgang Denk (1):
        Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Matthias Fuchs (1):
      ppc4xx: Add bootcount limit handling for APC405 boards

Stefan Roese (1):
      ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt

 board/esd/apc405/apc405.c  |    7 ++++++-
 cpu/ppc4xx/fdt.c           |   42 ++++++++++++++++++++++++++++++++++++++++++
 include/asm-ppc/4xx_pcie.h |    5 ++++-
 include/configs/APC405.h   |   14 ++++++++++++--
 4 files changed, 64 insertions(+), 4 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200804251340.07270.sr@denx.de> you wrote:
> The following changes since commit 58c5376ba67767ee684069d43e7f747a5d9ae8ed:
>   Wolfgang Denk (1):
>         Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Matthias Fuchs (1):
>       ppc4xx: Add bootcount limit handling for APC405 boards
> 
> Stefan Roese (1):
>       ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt

done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Some programming languages manage to  absorb  change,  but  withstand
progress.          -- Epigrams in Programming, ACM SIGPLAN Sept. 1982

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200804091258.06646.sr@denx.de> you wrote:
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Stefan Roese (2):
>       ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
>       ppc4xx: Fix Canyonlands default environment to work with new image support

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Small is beautiful.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c:
  Ben Warren (1):
        Fix Ethernet init() return codes

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Anatolij Gustschin (1):
      ppc4xx: Rework Lime support for lwmon5

Larry Johnson (1):
      ppc4xx: Fix dflush() to restore DVLIM register

Matthias Fuchs (2):
      ppx4xx: Fix sdram init on PMC440 boards
      ppc4xx: Update PMC440 config file

Niklaus Giger (1):
      ppc4xx: Make Sequoia boot vxWorks

Stefan Roese (1):
      ppc4xx: Fix sdram init on Sequoia boards

 board/amcc/sequoia/init.S  |   26 ++++----
 board/amcc/sequoia/sdram.c |    7 ++
 board/esd/pmc440/sdram.c   |    7 ++
 board/lwmon5/lwmon5.c      |  157 ++++++++++++++++++++++++--------------------
 cpu/ppc4xx/start.S         |    2 +
 include/configs/PMC440.h   |   16 +----
 include/configs/lwmon5.h   |   16 +++++
 include/configs/sequoia.h  |    1 +
 8 files changed, 135 insertions(+), 97 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200801111614.53498.sr@denx.de> you wrote:
> The following changes since commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c:
>   Ben Warren (1):
>         Fix Ethernet init() return codes
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Anatolij Gustschin (1):
>       ppc4xx: Rework Lime support for lwmon5
> 
> Larry Johnson (1):
>       ppc4xx: Fix dflush() to restore DVLIM register
> 
> Matthias Fuchs (2):
>       ppx4xx: Fix sdram init on PMC440 boards
>       ppc4xx: Update PMC440 config file
> 
> Niklaus Giger (1):
>       ppc4xx: Make Sequoia boot vxWorks
> 
> Stefan Roese (1):
>       ppc4xx: Fix sdram init on Sequoia boards

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Parkinson's Law:  Work expands to fill the time alloted it.

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit 8d99cd0691b7094ea1e2bf5309b0877047a9f375:
  Stefan Roese (1):
        Merge branch 'master' of /home/stefan/git/u-boot/u-boot

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Larry Johnson (2):
      ppc4xx: Refactor ECC POST for AMCC Denali core
      Merge Sequoia beautification into Korat code

Matthias Fuchs (3):
      ppc4xx: Sequoia coding style cleanup and beautification
      ppc4xx: Add DU440 board support
      ppc4xx: Complete DU440 board support

Niklaus Giger (5):
      ppc4xx: Netstal HCU4 board. Added POST. Various fixes
      ppc4xx: Netstal HCU5 board. Added POST. Various fixes
      ppc4xx: Netstal HCU5 board: added various fixes and POST
      ppc4xx: netstal/common define routines used by all boards
      ppc4xx: Netstal HCU4 board: added various fixes and POST

Stefan Roese (2):
      ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
      ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5

 MAINTAINERS                        |    1 +
 MAKEALL                            |    1 +
 Makefile                           |    3 +
 board/amcc/kilauea/cmd_pll.c       |    2 +-
 board/amcc/makalu/cmd_pll.c        |    2 +-
 board/amcc/sequoia/init.S          |    7 +-
 board/amcc/sequoia/sequoia.c       |  246 ++++-----
 board/esd/du440/Makefile           |   51 ++
 board/esd/du440/config.mk          |   37 ++
 board/esd/du440/du440.c            | 1018 ++++++++++++++++++++++++++++++++++++
 board/esd/du440/du440.h            |   42 ++
 board/esd/du440/init.S             |   81 +++
 board/esd/du440/u-boot.lds         |  145 +++++
 board/korat/korat.c                |  311 +++++------
 board/netstal/common/fixed_sdram.c |  105 ++++
 board/netstal/common/nm.h          |   38 ++
 board/netstal/common/nm_bsp.c      |  128 ++++-
 board/netstal/hcu4/Makefile        |    6 +-
 board/netstal/hcu4/config.mk       |    2 +-
 board/netstal/hcu4/hcu4.c          |  341 +++----------
 board/netstal/hcu5/Makefile        |    5 +-
 board/netstal/hcu5/README.txt      |    3 -
 board/netstal/hcu5/config.mk       |    2 +-
 board/netstal/hcu5/hcu5.c          |  289 +++++------
 board/netstal/hcu5/init.S          |   71 ++-
 board/netstal/hcu5/sdram.c         |   86 ++--
 board/netstal/hcu5/u-boot.lds      |    2 +-
 include/configs/DU440.h            |  438 ++++++++++++++++
 include/configs/PMC440.h           |    4 +-
 include/configs/hcu4.h             |  115 +++--
 include/configs/hcu5.h             |  136 +++--
 include/configs/kilauea.h          |    2 +-
 include/configs/makalu.h           |    2 +-
 post/cpu/ppc4xx/denali_ecc.c       |  266 +++++-----
 34 files changed, 2912 insertions(+), 1076 deletions(-)
 create mode 100644 board/esd/du440/Makefile
 create mode 100644 board/esd/du440/config.mk
 create mode 100644 board/esd/du440/du440.c
 create mode 100644 board/esd/du440/du440.h
 create mode 100644 board/esd/du440/init.S
 create mode 100644 board/esd/du440/u-boot.lds
 create mode 100644 board/netstal/common/fixed_sdram.c
 create mode 100644 board/netstal/common/nm.h
 create mode 100644 include/configs/DU440.h

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200801171607.19661.sr@denx.de> you wrote:
> The following changes since commit 8d99cd0691b7094ea1e2bf5309b0877047a9f375:
>   Stefan Roese (1):
>         Merge branch 'master' of /home/stefan/git/u-boot/u-boot
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Larry Johnson (2):
>       ppc4xx: Refactor ECC POST for AMCC Denali core
>       Merge Sequoia beautification into Korat code
> 
> Matthias Fuchs (3):
>       ppc4xx: Sequoia coding style cleanup and beautification
>       ppc4xx: Add DU440 board support
>       ppc4xx: Complete DU440 board support
> 
> Niklaus Giger (5):
>       ppc4xx: Netstal HCU4 board. Added POST. Various fixes
>       ppc4xx: Netstal HCU5 board. Added POST. Various fixes
>       ppc4xx: Netstal HCU5 board: added various fixes and POST
>       ppc4xx: netstal/common define routines used by all boards
>       ppc4xx: Netstal HCU4 board: added various fixes and POST
> 
> Stefan Roese (2):
>       ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
>       ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5

Done.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are two ways to write error-free programs. Only the  third  one
works.

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Stefan Roese]

The following changes since commit 8d79953d03e6c5b24215609997dafe4daa623cd6:
  Stefan Roese (1):
        Merge branch 'master' of /home/stefan/git/u-boot/u-boot

are available in the git repository at:

  git://www.denx.de/git/u-boot-cfi-flash.git master

Michael Schwingen (1):
      CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation

 drivers/mtd/cfi_flash.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

In message <200801131511.46692.sr@denx.de> you wrote:
> The following changes since commit 8d79953d03e6c5b24215609997dafe4daa623cd6:
>   Stefan Roese (1):
>         Merge branch 'master' of /home/stefan/git/u-boot/u-boot
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master
> 
> Michael Schwingen (1):
>       CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation

Done. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
When it is incorrect, it is, at least *authoritatively* incorrect.
                                    - Hitchiker's Guide To The Galaxy

[U-Boot-Users] [nand-flash] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Stefan Roese]

The following changes since commit 58d204256cb1ce1bd323847d9f644acf70a72e6a:
  Wolfgang Denk (1):
        LWMON5: enable hush shell as command line parser

are available in the git repository at:

  git://www.denx.de/git/u-boot-nand-flash.git master

Anton Vorontsov (1):
      nand: FSL UPM NAND driver

Kyungmin Park (1):
      OneNAND: Separate U-Boot dependent code from OneNAND

 drivers/mtd/nand/Makefile           |    2 +
 drivers/mtd/nand/fsl_upm.c          |  201 +++++++++++++++++++++++++++++++++++
 drivers/mtd/onenand/Makefile        |    2 +-
 drivers/mtd/onenand/onenand_base.c  |   20 ----
 drivers/mtd/onenand/onenand_uboot.c |   41 +++++++
 include/linux/mtd/fsl_upm.h         |   39 +++++++
 6 files changed, 284 insertions(+), 21 deletions(-)
 create mode 100644 drivers/mtd/nand/fsl_upm.c
 create mode 100644 drivers/mtd/onenand/onenand_uboot.c
 create mode 100644 include/linux/mtd/fsl_upm.h

[U-Boot-Users] [nand-flash] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Wolfgang Denk]

In message <200801161433.39904.sr@denx.de> you wrote:
> The following changes since commit 58d204256cb1ce1bd323847d9f644acf70a72e6a:
>   Wolfgang Denk (1):
>         LWMON5: enable hush shell as command line parser
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-nand-flash.git master
> 
> Anton Vorontsov (1):
>       nand: FSL UPM NAND driver
> 
> Kyungmin Park (1):
>       OneNAND: Separate U-Boot dependent code from OneNAND

Done. Thanks.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Computers are not intelligent.  They only think they are.

[U-Boot-Users] [nand-flash] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Stefan Roese]

The following changes since commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04:
  Anatolij Gustschin (1):
        Fix crash on sequoia in ppc_4xx_eth_init

are available in the git repository at:

  git://www.denx.de/git/u-boot-nand-flash.git master

Stefan Roese (1):
      nand_spl: Update nand_spl to support 2k page size NAND devices

 nand_spl/nand_boot.c |   64 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 63 insertions(+), 1 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit f43ad53908f1ea83a7c26c3505bbe84382e47aad:
  Wolfgang Denk (1):
        ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree

are available in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git master

Stefan Roese (1):
      ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit

 board/amcc/kilauea/kilauea.c |   14 +++++++-------
 1 files changed, 7 insertions(+), 7 deletions(-)

[U-Boot-Users] [ppc4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Wolfgang Denk]

In message <200801141011.01098.sr@denx.de> you wrote:
> The following changes since commit f43ad53908f1ea83a7c26c3505bbe84382e47aad:
>   Wolfgang Denk (1):
>         ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-ppc4xx.git master
> 
> Stefan Roese (1):
>       ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
> 
>  board/amcc/kilauea/kilauea.c |   14 +++++++-------
>  1 files changed, 7 insertions(+), 7 deletions(-)

Done. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Time is an illusion perpetrated by the manufacturers of space.

[U-Boot-Users] [cfi-flash] Please pull git://www.denx.de/git/u-boot-cfi-flash.git

[Wolfgang Denk]

In message <200712310736.09082.sr@denx.de> you wrote:
> The following changes since commit 0dcfe3a225a9436fc514f374a19242c672f1172b:
>   Wolfgang Denk (1):
>         Merge branch 'master' of /home/wd/git/u-boot/custodians
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-cfi-flash.git master

Done, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
How many QA engineers does it take to screw in a lightbulb? 3:  1  to
screw it in and 2 to say "I told you so" when it doesn't work.

[U-Boot-Users] What's new in u-boot-testing

[Stefan Roese]

The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
  Wolfgang Denk (1):
        Cleanup compiler warnings, update CHANGELOG

are found in the git repository at:

  git://www.denx.de/git/u-boot-testing.git

Jeffrey Mann (1):
      [patch] setenv(...) can delete environmentalvariables

Ladislav Michl (1):
      simplify silent console

Mike Frysinger (1):
      [patch] use unsigned char in smc91111 driver for mac

Sergei Shtylyov (1):
      Avoid assigning PCI resources from zero address

Stefan Roese (2):
      Merge with git://www.denx.de/git/u-boot.git
      Fix file mode

 common/cmd_nvedit.c |    5 ++++-
 common/console.c    |    8 +-------
 common/main.c       |   50 +++++++++++---------------------------------------
 drivers/pci_auto.c  |    7 ++++++-
 drivers/smc91111.c  |    8 ++++----
 5 files changed, 26 insertions(+), 52 deletions(-)

[U-Boot-Users] What's new in u-boot-testing

[Stefan Roese]

The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
  Wolfgang Denk (1):
        Cleanup compiler warnings, update CHANGELOG

are found in the git repository at:

  git://www.denx.de/git/u-boot-testing.git

Grzegorz Wianecki (1):
      Use PVR to distinguish MPC5200B from MPC5200 in boot message

Jeffrey Mann (1):
      [patch] setenv(...) can delete environmentalvariables

Ladislav Michl (1):
      simplify silent console

Mike Frysinger (1):
      [patch] use unsigned char in smc91111 driver for mac

Sergei Shtylyov (1):
      Avoid assigning PCI resources from zero address

Stefan Roese (2):
      Merge with git://www.denx.de/git/u-boot.git
      Fix file mode

 common/cmd_nvedit.c         |    5 +++-
 common/console.c            |    8 +------
 common/main.c               |   50 +++++++++---------------------------------
 cpu/mpc5xxx/cpu.c           |   12 +++++++---
 drivers/pci_auto.c          |    7 +++++-
 drivers/smc91111.c          |    8 +++---
 include/asm-ppc/processor.h |    8 +++++-
 7 files changed, 40 insertions(+), 58 deletions(-)

[U-Boot-Users] [PPC4xx] Please pull git://www.denx.de/git/u-boot-ppc4xx.git

[Stefan Roese]

The following changes since commit afc7e4c2a4729427bec672561ea1b3dbb5e8c0d3:
  Stefan Roese (1):
        Merge with git://www.denx.de/git/u-boot.git

are found in the git repository at:

  git://www.denx.de/git/u-boot-ppc4xx.git

Matthias Fuchs (1):
      ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.

Stefan Roese (3):
      ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
      ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
      Merge with /home/stefan/git/u-boot/u-boot-ppc4xx

 board/amcc/bamboo/bamboo.c   |   81 ------------------------------------------
 board/amcc/bamboo/u-boot.lds |   14 +-------
 cpu/ppc4xx/4xx_enet.c        |   30 +++++++++++-----
 include/configs/bamboo.h     |   67 ++++-------------------------------
 include/configs/katmai.h     |   14 +++++++-
 5 files changed, 42 insertions(+), 164 deletions(-)

[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Stefan Roese]

The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
  Wolfgang Denk (1):
        Cleanup compiler warnings, update CHANGELOG

are found in the git repository at:

  git://www.denx.de/git/u-boot-nand-flash.git

Stefan Roese (2):
      Remove BOARDLIBS usage completely
      Merge with git://www.denx.de/git/u-boot.git

Thomas Knobloch (1):
      NAND: Wrong calculation of page number in nand_block_bad()

 Makefile                       |    4 +++-
 board/ixdp425/config.mk        |    3 ---
 board/prodrive/pdnb3/config.mk |    3 ---
 cpu/ixp/npe/Makefile           |    2 +-
 doc/README.nand                |    7 +------
 drivers/nand/nand_base.c       |   10 +++++-----
 include/configs/delta.h        |    1 -
 include/configs/zylonite.h     |    1 -
 8 files changed, 10 insertions(+), 21 deletions(-)

[U-Boot-Users] [NAND] Please pull git://www.denx.de/git/u-boot-nand-flash.git

[Wolfgang Denk]

In message <200705050712.04176.sr@denx.de> you wrote:
> The following changes since commit 14da5f7675bbb427c469e3f45006e027b6e21db9:
>   Wolfgang Denk (1):
>         Cleanup compiler warnings, update CHANGELOG
> 
> are found in the git repository at:
> 
>   git://www.denx.de/git/u-boot-nand-flash.git
> 
> Stefan Roese (2):
>       Remove BOARDLIBS usage completely
>       Merge with git://www.denx.de/git/u-boot.git
> 
> Thomas Knobloch (1):
>       NAND: Wrong calculation of page number in nand_block_bad()

Merged, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,    CEO: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
What about WRITING it first and rationalizing it afterwords?  :-)
                       - Larry Wall in <8162@jpl-devvax.JPL.NASA.GOV>