From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Wed, 26 Sep 2007 15:43:28 +0200
Subject: [U-Boot-Users] DDR2 (Moduel 512M) work unstablely when enable
	the ECC
In-Reply-To: <18751105.449881190769437228.JavaMail.coremail@bj163app46.163.com>
References: <20060717133235.E7FE7353B10@atlas.denx.de>
	<18751105.449881190769437228.JavaMail.coremail@bj163app46.163.com>
Message-ID: <200709261543.28754.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Denny,

On Wednesday 26 September 2007, jxnuxdy wrote:
> Hi,     I bring up the u-boot in my 440EPx based on board successfully, it
> work fine when I disable the ECC, however when I enable the ECC I found it
> work unstablely in u-boot, for example it sometimes crashed in 'tftp'
> download.     Is there someone also encounter this issue?

Yes, we have a custom board that possibly has some problems with ECC on 440EPx 
too.

Could you please send your code in a more readable form? And is your board 
able to boot an OS (Linux etc.) without ECC enabled? Did you run some memory 
tests?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================