* [U-Boot-Users] download the u-boot.bin to flash ...but when power on ...nothing promted out
@ 2007-10-22 14:31 xbc_5419
0 siblings, 0 replies; only message in thread
From: xbc_5419 @ 2007-10-22 14:31 UTC (permalink / raw)
To: u-boot
hi,guys...
i am new to the u-boot....and wanna to port the u-boot.1.2.0....to a board based on at91rm9200,
i had a compiled u-boot.bin...but when i downloaded it to the flash....reboot...nothing promt out
i modified according the at91rm9200dk....
what does boot.bin and loader.bin work for? Do I have to have these two file?
1.Add a new configuration option for my board to the toplevel "Makefile" and to the "MAKEALL" script
2.Create a new directory to hold the specific code. Add any files you need. In your board directory, you will need at least the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds".
3.Create a new configuration file "include/configs/<board>.h" for my board...
4. Run "make <board>_config" with your new name.
5.make
everything is all right except not message promted out.
thanks
Jack Xu
2007-10-22
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20071022/2b76e970/attachment.htm
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-10-22 14:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-22 14:31 [U-Boot-Users] download the u-boot.bin to flash ...but when power on ...nothing promted out xbc_5419
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox