* [U-Boot-Users] std docs for u-boot
@ 2007-10-26 5:39 rameah nathan
2007-10-26 15:45 ` Sughosh Ganu
0 siblings, 1 reply; 2+ messages in thread
From: rameah nathan @ 2007-10-26 5:39 UTC (permalink / raw)
To: u-boot
Hi All,
Can any one send me the std docs to config u-boot for my
board.I am relatively new to boot loaders and i could find much
information from the READ ME file.I can appreciate if anyone send me
some standard documents to me at the earnest.
Regads
Ramesh.K.V
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot-Users] std docs for u-boot
2007-10-26 5:39 [U-Boot-Users] std docs for u-boot rameah nathan
@ 2007-10-26 15:45 ` Sughosh Ganu
0 siblings, 0 replies; 2+ messages in thread
From: Sughosh Ganu @ 2007-10-26 15:45 UTC (permalink / raw)
To: u-boot
Hi,
> Can any one send me the std docs to config u-boot for my
> board.I am relatively new to boot loaders and i could find much
> information from the README file.
The README in the u-boot is quite extensive and gives quite a good
description of porting u-boot to your hardware platform. Did you
check the section "Building the Software". This gives a good
explanation of porting u-boot to your board. The document also
contains description of the functionality of various config
macros. Google will also throw some results. But the README is a
good place to start.
--
sughosh
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-10-26 15:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-26 5:39 [U-Boot-Users] std docs for u-boot rameah nathan
2007-10-26 15:45 ` Sughosh Ganu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox