[U-Boot-Users] [PATCH] PPC4xx: Add Ethernet 1000BASE-X support for PPC4xx

[Stefan Roese <sr@denx.de>]

On Monday 29 October 2007, Larry Johnson wrote:
> This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG".  When this symbol
> is defined, the PHY will advertise it's capabilities for autonegotiation
> based on the capabilities shown in the PHY's status registers, including
> 1000BASE-X.  When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
> advertise hard-coded capabilities, as before.
>
> Signed-off-by: Larry Johnson <lrj@acm.org>

<snip>

> diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
> index 6b98025..55d777f 100644
> --- a/cpu/ppc4xx/miiphy.c
> +++ b/cpu/ppc4xx/miiphy.c
> @@ -39,6 +39,9 @@
>
>    |  19-Jul-00	 Ported to esd cpci405					     sr
>    |  23-Dec-03	 Ported from miiphy.c to 440GX Travis Sawyer		     TBS
>    |		 <travis.sawyer@sandburst.com>
>
> +  |  20-Oct-07	 Added support for autonegotiation base on reported	    
> lrj +  |		 capabilities, including 1000BASE-X.  Larry Johnson
> +  |		 <lrj@acm.org>

Please don't add commit logs to the source files. I know it has been done 
before, but we use git to maintain such change messages. If you like you can 
remove the older change messages too in your next patch version.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================