[U-Boot-Users] [PATCH 1/4] Add driver for National Semiconductor LM73 temperature sensor

[Stefan Roese <sr@denx.de>]

Hi Larry,

On Friday 02 November 2007, Larry Johnson wrote:
> This driver is based on the driver for the LM75.
>
> Signed-off-by: Larry Johnson <lrj@acm.org>
> ---
>
>  dtt/Makefile  |    2 +-
>  dtt/lm73.c    |  186
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/dtt.h |  
> 12 ++++-
>  3 files changed, 198 insertions(+), 2 deletions(-)
>
> diff --git a/dtt/Makefile b/dtt/Makefile
> index c6a670a..04abbaf 100644
> --- a/dtt/Makefile
> +++ b/dtt/Makefile
> @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk
>
>  LIB	= $(obj)libdtt.a
>
> -COBJS	= lm75.o ds1621.o adm1021.o lm81.o ds1775.o
> +COBJS	= lm75.o ds1621.o adm1021.o lm81.o ds1775.o lm73.o
>
>  SRCS	:= $(COBJS:.o=.c)
>  OBJS	:= $(addprefix $(obj),$(COBJS))
> diff --git a/dtt/lm73.c b/dtt/lm73.c
> new file mode 100644
> index 0000000..1e0bffa
> --- /dev/null
> +++ b/dtt/lm73.c
> @@ -0,0 +1,186 @@
> +/*
> + * (C) Copyright 2007
> + * Larry Johnson, lrj at acm.org
> + *
> + * based on dtt/lm75.c which is ...
> + *
> + * (C) Copyright 2001
> + * Bill Hunter,  Wave 7 Optics, williamhunter at mediaone.net
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +/*
> + * National Semiconductor LM73 Temperature Sensor
> + */
> +
> +#include <common.h>
> +
> +#ifdef CONFIG_DTT_LM73
> +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \
> +	(CFG_EEPROM_PAGE_WRITE_BITS < 1)
> +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and
> CFG_EEPROM_PAGE_WRITE_BITS must be greater than  1 to use CONFIG_DTT_LM73"
> +#endif
> +
> +#include <i2c.h>
> +#include <dtt.h>
> +
> +/*
> + * Device code
> + */
> +#define DTT_I2C_DEV_CODE 0x48	/* National Semi's LM73 device */
> +
> +int dtt_read(int sensor, int reg)
> +{
> +	int dlen;
> +	uchar data[2];
> +
> +	/*
> +	 * Validate 'reg' param and get register size.
> +	 */
> +	switch (reg) {
> +	case DTT_CONFIG:
> +	case DTT_CONTROL:
> +		dlen = 1;
> +		break;
> +	case DTT_READ_TEMP:
> +	case DTT_TEMP_HIGH:
> +	case DTT_TEMP_LOW:
> +	case DTT_ID:
> +		dlen = 2;
> +		break;
> +	default:
> +		return -1;
> +	}
> +	/*
> +	 * Calculate sensor address and register.
> +	 */
> +	sensor = DTT_I2C_DEV_CODE + (sensor & 0x07);	/* calculate LM73 addr */
> +	/*
> +	 * Now try to read the register.
> +	 */
> +	if (i2c_read(sensor, reg, 1, data, dlen) != 0) {
> +		return -1;
> +	}

No braces for single line statements please. This is a problem with all your 
patches. Please recheck them and fix this.

Otherwise looks good. Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================