From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Schwingen Date: Sat, 10 Nov 2007 16:34:48 +0100 Subject: [U-Boot-Users] PATCH: add support for MII-connected ethernet switch for IPX42x Message-ID: <20071110153448.GA11033@discworld.dascon.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, the following patch adds support for an ethernet switch that is connected to the MII port. In that case, there is no PHY with which auto-negotiation can be done, and the MII port always runs in full-duplex 100MBit/s mode. Signed-off-by: Michael Schwingen diff --git a/cpu/ixp/npe/npe.c b/cpu/ixp/npe/npe.c index 7e4af44..88d0183 100644 --- a/cpu/ixp/npe/npe.c +++ b/cpu/ixp/npe/npe.c @@ -361,6 +361,10 @@ static int npe_init(struct eth_device *dev, bd_t * bis) debug("%s: 1\n", __FUNCTION__); +#ifdef CONFIG_MII_ETHSWITCH + speed = _100BASET; + duplex = FULL; +#else miiphy_read (dev->name, p_npe->phy_no, PHY_BMSR, ®_short); /* @@ -396,6 +400,7 @@ static int npe_init(struct eth_device *dev, bd_t * bis) printf ("ENET Speed is %d Mbps - %s duplex connection\n", (int) speed, (duplex == HALF) ? "HALF" : "FULL"); } +#endif npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool); npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool +