[U-Boot-Users] Problems with usb storage devices on MPC5200 / TQM5200

[Wolfgang Denk <wd@denx.de>]

In message <47F3F98010FF784EBEE6526EAAB078D1024F87DE@tq-mailsrv.tq-net.de> you wrote:
> 
> I have to admit, that I never tested the TQM5200 (nor any other
> MPC5200 board) with the generic OHCI driver before. So I could not
> tell, if it worked ever with the generic driver.

We tested it, of course - with the hardware that is available to us.

Which means on pre-Rev. B CPU only. [I wish TQ would finally
understand what it means NOT to provide current hardware.]

> For the test with the current U-Boot I used three different memory
> sticks, which always worked with the old cpu specific OHCI driver.
> None of it worked with the generic driver :(.

I guess you use Rev. B silicon? Could you please try it on an old
board?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I am an atheist, thank God!