From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Mon, 3 Dec 2007 15:32:13 +0100 Subject: [U-Boot-Users] PPC440EPx: Make Sequoia boot vxWorks In-Reply-To: <200712031435.43840.niklausgiger@gmx.ch> References: <200712031435.43840.niklausgiger@gmx.ch> Message-ID: <200712031532.13354.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday 03 December 2007, Niklaus Giger wrote: > vxWorks expects in > TLB 0 a entry for the Machine Check interrupt > TLB 1 a entry for the RAM > TLB 2 a entry for the EBC > TLB 3 a entry for the boot flash > Therefore I reordered the TLB entries correspondingly and did set the > CFG_TLB_FOR_BOOT_FLASH to 3 (see my previous patch about minimal > support for vxWorks) > > After changing the baudrate to 9600 I had no problems to boot the > vxWorks image as distributed by WindRiver (Revision 2.0/1 from > June 18, 2007) > > If Stefan agrees with this patch, I will submit a similar for the yosemite > board. Please move such remarks that should not be added to the git commit log below the "---" further down. They will not be added to the git log this way. > Signed-off-by: Niklaus Giger > --- Here is the correct place for such remarks. Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================