From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Fri, 14 Dec 2007 22:03:52 +0100
Subject: [U-Boot-Users] POST tests without OCM
In-Reply-To: <67BFAF42E016FC40ADE4EE73E07B70600CA449@pks00005.kanatek.com>
References: <67BFAF42E016FC40ADE4EE73E07B70600CA449@pks00005.kanatek.com>
Message-ID: <200712142203.53099.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Craig,

On Friday 14 December 2007, Craig Millen wrote:
> I am trying to incorporate some of the POST tests into my u-boot, but I
> do not have any on-chip-memory (OCM). A lot of the code appears to use
> OCM for storage of data/testing.
> Has anyone achieved this by using the cache or any other means?

We are thinking about moving this POST_WORD from OCM to an unused GPT (General 
Purpose Timer) register. You *are* talking about the 440EP, right? This 
should be possible here too.

Patches are as always welcome. :)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================