From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Thu, 27 Dec 2007 16:38:35 +0100
Subject: [U-Boot-Users] 4xx ethernet bringup
In-Reply-To: <842228.9808.qm@web94109.mail.in2.yahoo.com>
References: <842228.9808.qm@web94109.mail.in2.yahoo.com>
Message-ID: <200712271638.35293.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Saturday 22 December 2007, shami Allam wrote:
> > After this if i ping it's not pinging self and also the host
> > ip(192.168.13.240). Can you help me out what could be the problem..... =>
> > mii read 0x01
>
>  0x01
>
> > when i read the PHY 0x01 register following is the value 0x7849. This
> > value show that "No Link". why so. PHY chip i am using DP83848I
>
> Possibly a PHY configuartion problem. Did you check if you soldered the
> correct resistors and condensators? Is the power-supply ok?
>
>   if I do the PHY loopback by enabling the bit 14bit in the BMCR. i am
> getting the reply. Still you suspect PHY configuration problem.....or do i
> need to do anything at MAC side......

Yes, I still suspect PHY hardware problems. Check (again) all R's and C's, 
clocks and power supplies.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================