[U-Boot-Users] [PATCH 1/3 RESEND] ppc4xx: Add initial esd PMC440 board files

[Stefan Roese <sr@denx.de>]

Hi Matthias,

On Friday 28 December 2007, Matthias Fuchs wrote:
> This patch adds the first files for the new esd PMC440 boards.
> The next two patches will complete the PMC440 board support.
>
> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
> ---
>  board/{amcc/sequoia => esd/pmc440}/Makefile        |    4 +-
>  board/{amcc/sequoia => esd/pmc440}/config.mk       |    0
>  board/{amcc/sequoia => esd/pmc440}/init.S          |   64 +--
>  .../sequoia/sequoia.c => esd/pmc440/pmc440.c}      |  564
> +++++++++++++++----- board/esd/pmc440/pmc440.h                          | 
> 154 ++++++
>  board/{amcc/sequoia => esd/pmc440}/sdram.c         |    0
>  board/{amcc/sequoia => esd/pmc440}/sdram.h         |    0
>  board/{amcc/sequoia => esd/pmc440}/u-boot-nand.lds |    0
>  board/{amcc/sequoia => esd/pmc440}/u-boot.lds      |    0
>  9 files changed, 595 insertions(+), 191 deletions(-)
>  copy board/{amcc/sequoia => esd/pmc440}/Makefile (95%)
>  copy board/{amcc/sequoia => esd/pmc440}/config.mk (100%)
>  copy board/{amcc/sequoia => esd/pmc440}/init.S (71%)
>  copy board/{amcc/sequoia/sequoia.c => esd/pmc440/pmc440.c} (57%)
>  create mode 100644 board/esd/pmc440/pmc440.h
>  copy board/{amcc/sequoia => esd/pmc440}/sdram.c (100%)
>  copy board/{amcc/sequoia => esd/pmc440}/sdram.h (100%)
>  copy board/{amcc/sequoia => esd/pmc440}/u-boot-nand.lds (100%)
>  copy board/{amcc/sequoia => esd/pmc440}/u-boot.lds (100%)

This option you used to make the patches smaller (find-copies or something 
like this) really makes reviewing not easy. And additionally the patch 
doesn't apply anymore, since the reference (sequoia) has changed in my non 
publiched branch already. Another reason why I would like to see a 100k size 
limit on this list.

So Matthias, could you please resend these 3 patches without this option to me 
directly?

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================