From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Fri, 4 Jan 2008 17:16:31 +0100 Subject: [U-Boot-Users] [PATCH] NAND update 2 In-Reply-To: <2563ac9e0801040640t1d96a183u519ebce0a35b31ba@mail.gmail.com> References: <476B8435.60902@tandberg.com> <200801041521.49719.sr@denx.de> <2563ac9e0801040640t1d96a183u519ebce0a35b31ba@mail.gmail.com> Message-ID: <200801041716.31409.sr@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Friday 04 January 2008, William Juul wrote: > > I'm trying to integrate your patches right now. Looks quite good so far > > but I'm facing some problems on a ppc4xx board with a large page NAND > > chip. Small page devices are fine. > > > > Did you ever test this stuff on large page devices? Which ones? > > We did run this on large page devices with 4KB page size (total size > of 1/2 GB). Unfortunately the devices are/were under NDA as they > are/were not officially released yet. > Stig can you verify if any/both of the flashes can be named here? Not needed anymore. I found my problem. A timeout was calculated incorrectly. I need to change nand_base.c at one place to make it work on my platform with my NAND chips. I'll post a till beginning of next week, so that you (or Stig) can test it on your platform too. > > BTW: What is the platform you "normally" test on (ARM, MIPS, PPC...)? > > We had two custom boards, one ARM based (926) and one PPC83xx. > > I will not have access to the build environment and boards the next > couple of months, but Stig Olsen is more than capable of answering > questions (if he has the time :-) Thanks. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================