From: Kim Phillips <kim.phillips@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Please pull u-boot-mpc83xx.git
Date: Tue, 8 Jan 2008 10:21:59 -0600 [thread overview]
Message-ID: <20080108102159.0fe3989f.kim.phillips@freescale.com> (raw)
Wolfgang D., I rebased mpc83xx; please retry pulling mainly mpc837x
support and libfdt code updates:
The following changes since commit 207f83f102b07cb186a2da0678c51ed954f1b431:
Wolfgang Denk (1):
Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx
are available in the git repository at:
git://www.denx.de/git/u-boot-mpc83xx.git
Anton Vorontsov (1):
MPC8360E-MDS: configure and enable second UART
Dave Liu (6):
mpc83xx: Add the support of MPC837x SoC
mpc83xx: Add the support of MPC8315E SoC
mpc83xx: Add the support of MPC837xEMDS board
mpc83xx: Add the MPC837xEMDS board readme
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
mpc83xx: update the CREDITS and MAINTAINERS
Joakim Tjernlund (1):
Add support CONFIG_UEC_ETH3 in MPC83xx
Kim Phillips (9):
mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
mpc83xx: fix remaining fdt_find_node_by_path references
mpc83xx: supress compiler warning
mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
mpc83xx: convert to using do_fixup_*()
mpc83xx: remove FLAT_TREE code
mpc83xx: rm remaining FLAT_TREE code
mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
Kumar Gala (1):
Remove CONFIG options related to OF that we dont use
Paul Gortmaker (3):
sbc8349: Remove board specific ECC code
sbc8349: migrate board to libfdt
sbc8349: enable libfdt by default on WRS SBC8349 board.
Timur Tabi (1):
83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
CREDITS | 5 +
MAINTAINERS | 2 +
MAKEALL | 1 +
Makefile | 10 +
board/freescale/mpc8313erdb/mpc8313erdb.c | 14 +-
board/freescale/mpc8323erdb/mpc8323erdb.c | 10 -
board/freescale/mpc832xemds/mpc832xemds.c | 14 +-
board/freescale/mpc832xemds/pci.c | 46 +--
board/freescale/mpc8349emds/mpc8349emds.c | 14 +-
board/freescale/mpc8349emds/pci.c | 76 ++---
board/freescale/mpc8349itx/mpc8349itx.c | 14 +-
board/freescale/mpc8349itx/pci.c | 76 ++---
board/freescale/mpc8360emds/mpc8360emds.c | 61 +++-
board/freescale/mpc8360emds/pci.c | 46 +--
board/freescale/mpc837xemds/Makefile | 50 +++
board/freescale/mpc837xemds/config.mk | 28 ++
board/freescale/mpc837xemds/mpc837xemds.c | 132 +++++++
board/freescale/mpc837xemds/pci.c | 65 +++
board/sbc8349/pci.c | 52 ++-
board/sbc8349/sbc8349.c | 347 +----------------
cpu/mpc83xx/Makefile | 2 +-
cpu/mpc83xx/cpu.c | 348 ++---------------
cpu/mpc83xx/cpu_init.c | 6 +-
cpu/mpc83xx/fdt.c | 72 ++++
cpu/mpc83xx/pci.c | 83 ++---
cpu/mpc83xx/spd_sdram.c | 7 +-
cpu/mpc83xx/speed.c | 201 ++++++++--
doc/README.mpc837xemds | 104 +++++
drivers/net/tsec.c | 10 +
drivers/qe/uec.c | 23 ++
include/asm-ppc/global_data.h | 15 +-
include/asm-ppc/immap_83xx.h | 145 +++++++-
include/configs/MPC8313ERDB.h | 9 +-
include/configs/MPC8323ERDB.h | 12 +-
include/configs/MPC832XEMDS.h | 12 +-
include/configs/MPC8349EMDS.h | 8 +-
include/configs/MPC8349ITX.h | 11 +-
include/configs/MPC8360EMDS.h | 15 +-
include/configs/MPC837XEMDS.h | 600 +++++++++++++++++++++++++++++
include/configs/sbc8349.h | 10 +-
include/mpc83xx.h | 261 ++++++++++++--
net/eth.c | 3 +
42 files changed, 1953 insertions(+), 1067 deletions(-)
create mode 100644 board/freescale/mpc837xemds/Makefile
create mode 100644 board/freescale/mpc837xemds/config.mk
create mode 100644 board/freescale/mpc837xemds/mpc837xemds.c
create mode 100644 board/freescale/mpc837xemds/pci.c
create mode 100644 cpu/mpc83xx/fdt.c
create mode 100644 doc/README.mpc837xemds
create mode 100644 include/configs/MPC837XEMDS.h
Thanks,
Kim
next reply other threads:[~2008-01-08 16:21 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-08 16:21 Kim Phillips [this message]
2008-01-09 10:27 ` [U-Boot-Users] Please pull u-boot-mpc83xx.git Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2008-07-03 21:14 Kim Phillips
2008-07-06 22:33 ` Wolfgang Denk
2008-05-08 22:13 Kim Phillips
2008-05-09 22:34 ` Wolfgang Denk
2008-04-25 14:45 Kim Phillips
2008-04-25 22:07 ` Wolfgang Denk
2008-03-28 23:49 Kim Phillips
2008-03-29 0:04 ` Kim Phillips
2008-04-07 22:01 ` Wolfgang Denk
2008-03-26 0:24 Kim Phillips
2008-03-26 1:03 ` Wolfgang Denk
2008-01-17 20:13 Kim Phillips
2008-01-18 2:11 ` Dave Liu
2008-01-23 12:02 ` Wolfgang Denk
2008-01-23 12:22 ` Liu Dave
2008-01-23 12:00 ` Wolfgang Denk
2008-01-16 18:39 Kim Phillips
2008-01-16 18:44 ` Joakim Tjernlund
2008-01-16 18:48 ` Kim Phillips
2008-01-16 20:16 ` Ben Warren
2008-01-17 9:19 ` Joakim Tjernlund
2008-01-17 9:22 ` Liu Dave
2008-01-17 14:36 ` Ben Warren
2008-01-17 14:35 ` Ben Warren
2008-01-16 21:06 ` Wolfgang Denk
2008-01-11 4:04 Kim Phillips
2008-01-11 23:12 ` Wolfgang Denk
2007-12-20 23:56 Kim Phillips
2007-12-21 0:15 ` Joakim Tjernlund
2008-01-08 10:26 ` Joakim Tjernlund
2008-01-08 16:21 ` Kim Phillips
2008-01-08 16:53 ` Joakim Tjernlund
2007-12-26 23:44 ` Wolfgang Denk
2007-08-10 5:46 Kim Phillips
2007-08-10 8:38 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080108102159.0fe3989f.kim.phillips@freescale.com \
--to=kim.phillips@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox