From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Tue, 8 Jan 2008 13:34:48 +0100
Subject: [U-Boot-Users] Do we enable Interrupts in U-Boot?
In-Reply-To: <7f245da80801080411g4f8e4f82xdb0f6271a8b20f5a@mail.gmail.com>
References: <7f245da80801080411g4f8e4f82xdb0f6271a8b20f5a@mail.gmail.com>
Message-ID: <200801081334.49170.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tuesday 08 January 2008, Chetan Nanda wrote:
> I am using a custom board (similar to MALTA) with MIPS - 4KEC processor on
> it. I use u-boot to load linux on our board.
>
> My Question is :
> Do we enable interrupt in u-boot code  for UART and ETHERNET or we
> have running in Polling Mode?

Normally all this is done in polling mode.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================