* [U-Boot-Users] [PATCH] ppc4xx: Update PMC440 config file
@ 2008-01-11 13:55 Matthias Fuchs
2008-01-11 14:55 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Matthias Fuchs @ 2008-01-11 13:55 UTC (permalink / raw)
To: u-boot
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
include/configs/PMC440.h | 16 +++-------------
1 files changed, 3 insertions(+), 13 deletions(-)
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index 87fca3c..67bf4b1 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -41,7 +41,9 @@
#define CONFIG_SYS_CLK_FREQ 33333400
+#if 0 /* temporary disabled because OS/9 does not like dcache on startup */
#define CONFIG_4xx_DCACHE /* enable dcache */
+#endif
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
@@ -272,6 +274,7 @@
CFG_BOOTFILE \
CFG_ROOTPATH \
"netdev=eth0\0" \
+ "ethrotate=no\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -354,10 +357,6 @@
#define CONFIG_CMD_SDRAM
/* POST support */
-/* ethernet POST sometimes freezes the CPU.
- * So disable it for now until issue is solved
- */
-#if 0
#define CONFIG_POST (CFG_POST_MEMORY | \
CFG_POST_CPU | \
CFG_POST_UART | \
@@ -366,15 +365,6 @@
CFG_POST_FPU | \
CFG_POST_ETHER | \
CFG_POST_SPR)
-#else
-#define CONFIG_POST (CFG_POST_MEMORY | \
- CFG_POST_CPU | \
- CFG_POST_UART | \
- CFG_POST_I2C | \
- CFG_POST_CACHE | \
- CFG_POST_FPU | \
- CFG_POST_SPR)
-#endif
#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
--
1.5.3
^ permalink raw reply related [flat|nested] 2+ messages in thread* [U-Boot-Users] [PATCH] ppc4xx: Update PMC440 config file
2008-01-11 13:55 [U-Boot-Users] [PATCH] ppc4xx: Update PMC440 config file Matthias Fuchs
@ 2008-01-11 14:55 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2008-01-11 14:55 UTC (permalink / raw)
To: u-boot
On Friday 11 January 2008, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Applied. Thanks.
Viele Gr??e,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-01-11 14:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-01-11 13:55 [U-Boot-Users] [PATCH] ppc4xx: Update PMC440 config file Matthias Fuchs
2008-01-11 14:55 ` Stefan Roese
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox