public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH v2 1/2] nand: FSL UPM NAND driver
Date: Mon, 14 Jan 2008 23:09:32 +0300	[thread overview]
Message-ID: <20080114200932.GA24168@localhost.localdomain> (raw)
In-Reply-To: <20080114200611.GA3442@localhost.localdomain>


Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/mtd/nand/Makefile   |    2 +
 drivers/mtd/nand/fsl_upm.c  |  201 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/mtd/fsl_upm.h |   39 ++++++++
 3 files changed, 242 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mtd/nand/fsl_upm.c
 create mode 100644 include/linux/mtd/fsl_upm.h

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 42864f9..244fa09 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -32,6 +32,8 @@ COBJS-y += nand_ecc.o
 COBJS-y += nand_bbt.o
 COBJS-y += nand_util.o
 
+COBJS-y += fsl_upm.o
+
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
 OBJS 	:= $(addprefix $(obj),$(COBJS))
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
new file mode 100644
index 0000000..5cc410a
--- /dev/null
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -0,0 +1,201 @@
+/*
+ * FSL UPM NAND driver
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *                    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_FSL_UPM)
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/fsl_upm.h>
+#include <nand.h>
+
+#define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */
+#define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */
+#define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */
+#define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */
+
+static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
+{
+	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset);
+}
+
+static void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
+	while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+		eieio();
+}
+
+static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
+{
+	out_be32(upm->mar, cmd << (32 - width * 8));
+	out_8(upm->io_addr, 0x0);
+}
+
+static void fsl_upm_setup(struct fsl_upm *upm)
+{
+	int i;
+
+	/* write upm array */
+	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA);
+
+	for (i = 0; i < 64; i++) {
+		out_be32(upm->mdr, upm->array[i]);
+		out_8(upm->io_addr, 0x0);
+	}
+
+	/* normal operation */
+	out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
+	while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+		eieio();
+}
+
+static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
+			int page_addr)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_upm_nand *fun = chip->priv;
+
+	fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+
+	if (command == NAND_CMD_SEQIN) {
+		int readcmd;
+
+		if (column >= mtd->oobblock) {
+			/* OOB area */
+			column -= mtd->oobblock;
+			readcmd = NAND_CMD_READOOB;
+		} else if (column < 256) {
+			/* First 256 bytes --> READ0 */
+			readcmd = NAND_CMD_READ0;
+		} else {
+			column -= 256;
+			readcmd = NAND_CMD_READ1;
+		}
+		fsl_upm_run_pattern(&fun->upm, fun->width, readcmd);
+	}
+
+	fsl_upm_run_pattern(&fun->upm, fun->width, command);
+
+	fsl_upm_end_pattern(&fun->upm);
+
+	fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+
+	if (column != -1)
+		fsl_upm_run_pattern(&fun->upm, fun->width, column);
+
+	if (page_addr != -1) {
+		fsl_upm_run_pattern(&fun->upm, fun->width, page_addr);
+		fsl_upm_run_pattern(&fun->upm, fun->width,
+				    (page_addr >> 8) & 0xFF);
+		if (chip->chipsize > (32 << 20)) {
+			fsl_upm_run_pattern(&fun->upm, fun->width,
+					    (page_addr >> 16) & 0x0f);
+		}
+	}
+
+	fsl_upm_end_pattern(&fun->upm);
+
+	if (fun->wait_pattern) {
+		/*
+		 * Some boards/chips needs this. At least on MPC8360E-RDK we
+		 * need it. Probably weird chip, because I don't see any need
+		 * for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
+		 * 0-2 unexpected busy states per block read.
+		 */
+		while (!fun->dev_ready())
+			debug("unexpected busy state\n");
+	}
+}
+
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	out_8(chip->IO_ADDR_W, byte);
+}
+
+static u8 nand_read_byte(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	return in_8(chip->IO_ADDR_R);
+}
+
+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	for (i = 0; i < len; i++)
+		out_8(chip->IO_ADDR_W, buf[i]);
+}
+
+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	for (i = 0; i < len; i++)
+		buf[i] = in_8(chip->IO_ADDR_R);
+}
+
+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+	struct nand_chip *chip = mtd->priv;
+
+	for (i = 0; i < len; i++) {
+		if (buf[i] != in_8(chip->IO_ADDR_R))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static void nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+}
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	struct nand_chip *chip = mtd->priv;
+	struct fsl_upm_nand *fun = chip->priv;
+
+	return fun->dev_ready();
+}
+
+int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
+{
+	/* yet only 8 bit accessors implemented */
+	if (fun->width != 1)
+		return -ENOSYS;
+
+	fsl_upm_setup(&fun->upm);
+
+	chip->priv = fun;
+	chip->chip_delay = fun->chip_delay;
+	chip->eccmode = NAND_ECC_SOFT;
+	chip->cmdfunc = fun_cmdfunc;
+	chip->hwcontrol = nand_hwcontrol;
+	chip->read_byte = nand_read_byte;
+	chip->read_buf = nand_read_buf;
+	chip->write_byte = nand_write_byte;
+	chip->write_buf = nand_write_buf;
+	chip->verify_buf = nand_verify_buf;
+	chip->dev_ready = nand_dev_ready;
+
+	return 0;
+}
+#endif /* CONFIG_CMD_NAND */
diff --git a/include/linux/mtd/fsl_upm.h b/include/linux/mtd/fsl_upm.h
new file mode 100644
index 0000000..634ff02
--- /dev/null
+++ b/include/linux/mtd/fsl_upm.h
@@ -0,0 +1,39 @@
+/*
+ * FSL UPM NAND driver
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *                    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __LINUX_MTD_NAND_FSL_UPM
+#define __LINUX_MTD_NAND_FSL_UPM
+
+#include <linux/mtd/nand.h>
+
+struct fsl_upm {
+	const u32 *array;
+	void __iomem *mdr;
+	void __iomem *mxmr;
+	void __iomem *mar;
+	void __iomem *io_addr;
+};
+
+struct fsl_upm_nand {
+	struct fsl_upm upm;
+
+	int width;
+	int upm_cmd_offset;
+	int upm_addr_offset;
+	int wait_pattern;
+	int (*dev_ready)(void);
+	int chip_delay;
+};
+
+extern int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun);
+
+#endif
-- 
1.5.2.2

  reply	other threads:[~2008-01-14 20:09 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-09 17:50 [U-Boot-Users] [PATCH v2 0/5] mpc83xx: MPC8360E-RDK related patches Anton Vorontsov
2008-01-09 17:57 ` [U-Boot-Users] [PATCH 1/5] mpc83xx: add "fsl, qe" compatible fixups Anton Vorontsov
2008-01-09 17:57 ` [U-Boot-Users] [PATCH 2/5] mpc83xx: add support for the MPC8360E-RDK Anton Vorontsov
2008-01-09 17:57 ` [U-Boot-Users] [PATCH 3/5] nand: FSL UPM NAND driver Anton Vorontsov
2008-01-10 17:31   ` Stefan Roese
2008-01-14 20:06     ` Anton Vorontsov
2008-01-14 20:09       ` Anton Vorontsov [this message]
2008-01-16 13:16         ` [U-Boot-Users] [PATCH v2 1/2] " Stefan Roese
2008-01-14 20:09       ` [U-Boot-Users] [PATCH v2 2/2] mpc83xx: MPC8360E-RDK: add support for NAND Anton Vorontsov
2008-01-14 20:09       ` [U-Boot-Users] [PATCH] nand: fsl_upm: convert to updated MTD NAND infrastructure Anton Vorontsov
2008-01-16 13:19         ` Stefan Roese
2008-01-15  8:41       ` [U-Boot-Users] [PATCH 3/5] nand: FSL UPM NAND driver Stefan Roese
2008-01-09 17:57 ` [U-Boot-Users] [PATCH 4/5] mpc83xx: MPC8360E-RDK: add support for NAND Anton Vorontsov
2008-01-16 18:31   ` Kim Phillips
2008-01-17 12:40     ` Anton Vorontsov
2008-01-09 17:58 ` [U-Boot-Users] [PATCH 5/5] mpc83xx: UEC: add support for Broadcom BCM5481 Gigabit PHY Anton Vorontsov
2008-01-10 20:41   ` Ben Warren
2008-01-10 21:10     ` Peter Barada
2008-01-11  5:26       ` Ben Warren
2008-01-11  4:00 ` [U-Boot-Users] [PATCH v2 0/5] mpc83xx: MPC8360E-RDK related patches Kim Phillips

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080114200932.GA24168@localhost.localdomain \
    --to=avorontsov@ru.mvista.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox