From: Wolfgang Denk <wd@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH]ppc_4xx:netstal/common define routines used by all boards
Date: Mon, 14 Jan 2008 21:16:24 +0100 [thread overview]
Message-ID: <20080114201624.F1291248DE@gemini.denx.de> (raw)
In-Reply-To: Your message of "Mon, 14 Jan 2008 15:26:09 +0100." <200801141526.09784.niklausgiger@gmx.ch>
In message <200801141526.09784.niklausgiger@gmx.ch> you wrote:
> Added some routines used by all Netstal boards nm_show_print and
> common_misc_init_r and the very specific code to handle our SW installation
> procedure (set_params_for_sw_install).
>
> Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
> ---
> board/netstal/common/nm_bsp.c | 131 ++++++++++++++++++++++++++++++++++++-----
> 1 files changed, 116 insertions(+), 15 deletions(-)
>
> diff --git a/board/netstal/common/nm_bsp.c b/board/netstal/common/nm_bsp.c
> index a9de45e..2c1d483 100644
> --- a/board/netstal/common/nm_bsp.c
> +++ b/board/netstal/common/nm_bsp.c
> @@ -20,22 +20,123 @@
>
> #include <common.h>
> #include <command.h>
> +#include <net.h>
>
> -#ifdef CONFIG_CMD_BSP
> -/*
> - * Command nm_bsp: Netstal Maschinen BSP specific command
> - */
> -int nm_bsp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define DEFAULT_ETH_ADDR "ethaddr"
> +
> +extern void hcu_led_set(u32 value);
> +extern u32 get_serial_number(void);
> +extern u32 hcu_get_slot(void);
> +
> +enum {
> + /* HW_GENERATION_HCU1 is no longer supported */
> + HW_GENERATION_HCU2 = 0x10,
> + HW_GENERATION_HCU3 = 0x10,
> + HW_GENERATION_HCU4 = 0x20,
> + HW_GENERATION_HCU5 = 0x30,
> + HW_GENERATION_MCU = 0x08,
> + HW_GENERATION_MCU20 = 0x0a,
> + HW_GENERATION_MCU25 = 0x09,
> +};
> +
> +
> +void nm_show_print(int generation, int index, int hw_capabilities)
> +{
> + int j;
> + /* reset ANSI terminal color mode */
> + printf ("\x1B""[0m""Netstal Maschinen AG: ");
> + if (generation == HW_GENERATION_HCU3)
> + printf("HCU3: index %d", index);
> + else if (generation == HW_GENERATION_HCU4)
> + printf("HCU4: index %d", index);
> + else if (generation == HW_GENERATION_HCU5)
> + printf("HCU5: index %d", index);
> + else if (generation == HW_GENERATION_MCU25)
> + printf("MCU25: index %d", index);
else
???
You probably want to do this in a loop over an array of structs
matching "generation" IDs with names - will become more readable and
less error prone. And eventually smaller code, too.
> + }
> +
> + /* IP-Adress update */
> + {
> + IPaddr_t ipaddr;
> + char *ipstring;
Please don't do this. Declare the vaiable at entry into this funtion.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
A direct quote from the Boss: "We passed over a lot of good people to
get the ones we hired."
prev parent reply other threads:[~2008-01-14 20:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-14 14:26 [U-Boot-Users] [PATCH]ppc_4xx:netstal/common define routines used by all boards Niklaus Giger
2008-01-14 15:05 ` Stefan Roese
2008-01-14 20:16 ` Wolfgang Denk [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080114201624.F1291248DE@gemini.denx.de \
--to=wd@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox