[U-Boot-Users] [PATCH]ppc_4xx:netstal HCU5 board: added various fixes and POST

[Wolfgang Denk <wd@denx.de>]

In message <200801141530.23152.niklausgiger@gmx.ch> you wrote:
> Moved some code to nestal/common/nm_bsp.c.
> Added support for the vxWorks EDR.
> Enable trace for Lauterbach, if present.
> Added support for POST.
...
> +	if (mfspr(dbcr0) & 0x80000000) { /* External debugger alive */
> +		/* enable trace facilty for Lauterback

		/*
		 * enable trace facilty for Lauterbach
		...

> -	/*-------------------------------------------------------------------+
> -	  | Set priority for all PLB3 devices to 0.
> -	  | Set PLB3 arbiter to fair mode.
> -	  +-------------------------------------------------------------------*/
> +	/*-------------------------------------------------------------------
> +	  * Set priority for all PLB3 devices to 0.
> +	  * Set PLB3 arbiter to fair mode.
> +	  *-------------------------------------------------------------------*/
...
> -	/*-------------------------------------------------------------------+
> -	  | Set priority for all PLB4 devices to 0.
> -	  +-------------------------------------------------------------------*/
> +	/*-------------------------------------------------------------------
> +	 * Set priority for all PLB4 devices to 0.
> +	 *-------------------------------------------------------------------*/

If you change multiline comments, then please do it right. The
preferred style for long (multi-line) comments is: 

        /*
         * This is the preferred style for multi-line
         * comments in the Linux kernel source code.
         * Please use it consistently.
         *
         * Description:  A column of asterisks on the left side,
         * with beginning and ending almost-blank lines.
         */


> +	/* TLB#12: */
> +	tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )

Here and in some other places: please mind the maximum line length.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If the code and  the  comments  disagree,  then  both  are  probably
wrong."                                                - Norm Schryer