From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Wed, 16 Jan 2008 11:25:23 +0100
Subject: [U-Boot-Users] [PATCH (RESUBMIT)] ppc4xx: Refactor ECC POST for
	AMCC Denali core
In-Reply-To: <478D0B1E.9090906@acm.org>
References: <478D0B1E.9090906@acm.org>
Message-ID: <200801161125.23558.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Tuesday 15 January 2008, Larry Johnson wrote:
> The ECC POST reported intermittent failures running after power-up on
> the Korat PPC440EPx board.  Even when the test passed, the debugging
> output occasionally reported additional unexpected ECC errors.
>
> This refactoring has three main objectives: (1) minimize the code
> executed with ECC enabled during the tests, (2) add more checking of the
> results so any unexpected ECC errors would cause the test to fail, and
> (3) use synchronization (only) where required by the processor.
>
> Signed-off-by: Larry Johnson <lrj@acm.org>

Applied, thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================