[U-Boot-Users] [PATCH ARM] AT91CAP9 support : move board files to Atmel vendor directory.

[Stefan Roese <sr@denx.de>]

On Monday 04 February 2008, Stelian Pop wrote:
> Le dimanche 03 f?vrier 2008 ? 13:54 +0100, Haavard Skinnemoen a ?crit :
> > I think they should be collected according to board manufacturer or
> > brand, not cpu type. So boards/atmel is for boards manufactured by
> > Atmel, not all boards that happen to have an Atmel cpu on them.
> >
> > Or at least that's what appears to be the current practice.
>
> Ok, so everybody seem to agree that it is good practice to use the
> vendor directories.

Yep, thats what I meant.

> The (incremental) patch below moves the AT91CAP9ADK board files into the
> vendor directory.

Acked-by: Stefan Roese <sr@denx.de>

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================