[U-Boot-Users] [PATCH 1/3] ppc4xx: PPC405GPr add missing EIRR register

[Stefan Roese <sr@denx.de>]

On Tuesday 05 February 2008, Stefan Roese wrote:
> > Therefore I concluded that it is very PPC405GPr specific. But I did not
> > check all other PPC405 variants.
>
> Yes, you seem to be right here. This *is* 405GPr specific. But I don't
> think it is worth adding this CONFIG_405GPr. Right now by setting
> CONFIG_405GP in your board config file, it should work correctly on boards
> with 405GP *and* 405GPr. We shouldn't loose this "feature". So please add
> this define if CONFIG_405GP is defined. And add a comment that it is only
> valid for 405GPr.

And please use the upper case name from the users manual: CPC0_EIRR. I know 
this is not done consistently but I we should use these names for newer 
definitions since it makes it easier to match those defines with the manuals.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================