From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Thu, 7 Feb 2008 17:28:12 +0100
Subject: [U-Boot-Users] U-Boot WinCE booting support?
In-Reply-To: <47AB303B.5040402@dave-tech.it>
References: <47AB303B.5040402@dave-tech.it>
Message-ID: <200802071728.12984.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Andrea,

On Thursday 07 February 2008, R&D4 wrote:
> we are currently using u-boot (1.2.0) on our ARM9 based platform to boot
> WinCE 4.2, 5.0 and 6.0 images (.bin).
> More than this we also changes some part of WinCE BSP to allow passing
> "kernel bootline parameters" (as much like in linux ;-) ) to configure
> console output (on serial line) or ip configuration.

Thanks. That's good news.

> If you want I can send you the patch: it's a bit "ugly" ;-) but it can
> be made platform indipendent with ease.
> Basically it adds a new command (bootwince) which is much like bootm,
> but "check AND decompress" .bin images and run WinCE.
> Of course the WinCE image can be started directly RAM (e.g. downloaded
> via TFTP for debugging pourpose) or from Flash (for stand alone
> operations).

Yes, please send me the patch. Perhaps we will clean it up and integrate it 
into the common source.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================