[U-Boot-Users] Please pull u-boot-83xx.git

[U-Boot-Users] Please pull u-boot-83xx.git

[Kim Phillips]

Wolfgang D.,

We're up to three versions of patches from different people to fix
non-powerpc build breakage (due to the new SPI driver), so I decided to
make this easy for you :)

I've chosen and applied Ben Warren's version of the fix (which declares
the new CONFIG_MPC8XXX_SPI define), along with some seemingly harmless
TQM834x flash size fixes.  Please pull:

The following changes since commit 98b742489c09780be6a832eeaa4e5eff824792bb:
  Wolfgang Denk (1):
        inka4x0: remove dead code

are available in the git repository at:

  git://www.denx.de/git/u-boot-mpc83xx.git

Ben Warren (1):
      Fix conditional compilation of mpx8xxx_spi driver

Jens Gehrlein (2):
      TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
      TQM834x: enable DHCP

 drivers/spi/mpc8xxx_spi.c     |    4 ++--
 include/configs/MPC8349EMDS.h |    1 +
 include/configs/TQM834x.h     |    7 ++++---
 3 files changed, 7 insertions(+), 5 deletions(-)

Danke schoen,

Kim

[U-Boot-Users] Please pull u-boot-83xx.git

[Wolfgang Denk]

Dear Kim,

in message <20080129121053.923e0ceb.kim.phillips@freescale.com> you wrote:
> 
> We're up to three versions of patches from different people to fix
> non-powerpc build breakage (due to the new SPI driver), so I decided to
> make this easy for you :)
> 
> I've chosen and applied Ben Warren's version of the fix (which declares
> the new CONFIG_MPC8XXX_SPI define), along with some seemingly harmless
> TQM834x flash size fixes.  Please pull:
> 
> The following changes since commit 98b742489c09780be6a832eeaa4e5eff824792bb:
>   Wolfgang Denk (1):
>         inka4x0: remove dead code
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-mpc83xx.git
> 
> Ben Warren (1):
>       Fix conditional compilation of mpx8xxx_spi driver
> 
> Jens Gehrlein (2):
>       TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
>       TQM834x: enable DHCP

Applied, thanks a lot!

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All this doesn't alter anything, you know. The world is still full of
stupid people. They don't use their brains. They don't seem  to  want
to think straight.                    - Terry Pratchett, _Soul Music_

[U-Boot-Users] Taishan or ppc440gx pci reset

[k b]

Hi,
I'm using the amcc taishan board and have a pci-x device connected to it.
1) how do I take the pci device out of reset at boot up ?
2) and how do i reset the pci device ?

thanks 
Kunal

_________________________________________________________________
Climb to the top of the charts!?Play the word scramble challenge with star power.
http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan

[U-Boot-Users] Taishan or ppc440gx pci reset

[Stefan Roese]

On Tuesday 12 February 2008, k b wrote:
> I'm using the amcc taishan board and have a pci-x device connected to it.
> 1) how do I take the pci device out of reset at boot up ?

This will be done automatically upon bootup/reset.

> 2) and how do i reset the pci device ?

I don't think that you can force a PCI reset manually. The PCI reset is most 
likely directly coupled with the board reset.

But why are you asking? Do you experience problems with PCI-X devices on 
Taishan?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================