[U-Boot-Users] 440EPX is not booting from 1Gb/128MB NAND flash

[Stefan Roese <sr@denx.de>]

Hi Nikhil.

On Thursday 14 February 2008, Nikhil Gautam wrote:
> Thanks for all the help in solving the problem. I have some questions
> about submitting the patch and testing of the patch.
>
> First of all I am working on proprietary board based on AMCC sequoia
> board.

You need to create a new board port for your custom board. This could be done 
by "cloning" the Sequoia port and modifying it.

> Hence some of the files I changed are module specific like 
> config.mk in nand_spl/board/....and I also modified the following
> lines in u-boot-nand.lds
>
>     cpu/ppc4xx/start.o	(.text)
>
>     /* Align to next NAND block */
>     . = ALIGN(0x20000);
>     common/environment.o  (.ppcenv)
>     /* Keep some space here for redundant env and potential bad env blocks
> */ . = ALIGN(0x80000);
>
> Above is to allow some space for u-boot environment and possible bad
> blocks. This file is also module specific.

Right. All this should *not* go into the Sequoia port but into your new board 
port. The infrastructure is ready for it.

> Besides these two files I have changed nand_boot.c and ndfc.c.

Sure. These are probably the only common changes needed.

> Considering all this, how should I create this patch. Should I create
> a patch for the sequoia board?

*NO*. Please don't. Create you own board port.

> Also how are we going to test this patch? I'll make sure it meets all
> the requirement in terms of coding style, etc but as far as testing
> goes, I can only test on my board because sequoia reference board
> comes only with 256Mb NAND flash.

You will test this on your board and I (or somebody else) will test it on 
already supported NAND booting platforms.

Hope this helps.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================