From mboxrd@z Thu Jan  1 00:00:00 1970
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Fri, 15 Feb 2008 11:02:31 +0100
Subject: [U-Boot-Users] [PATCH] Extend ATI Radeon driver to support
	more	video modes
In-Reply-To: <20080215092413.GC8190@enneenne.com>
References: <47B38277.6010001@denx.de>
	<20080214003914.1F01524050@gemini.denx.de>
	<20080215092413.GC8190@enneenne.com>
Message-ID: <20080215100231.GA4599@game.jcrosoft.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 10:24 Fri 15 Feb     , Rodolfo Giometti wrote:
> On Thu, Feb 14, 2008 at 01:39:14AM +0100, Wolfgang Denk wrote:
> > In message <47B38277.6010001@denx.de> you wrote:
> > > 
> > > >> +#if 1 /* @ 60 Hz */
> > > >> +		mode->crtc_h_total_disp = 0x009f00d2;
> > > >> +		mode->crtc_h_sync_strt_wid = 0x000e0528;
> > > >> +		mode->crtc_v_total_disp = 0x03ff0429;
> > > >> +		mode->crtc_v_sync_strt_wid = 0x00030400;
> > > >> +		mode->crtc_pitch = 0x00a000a0;
> > > >> +		mode->ppll_div_3 = 0x00010060;
> > > >> +#else /* @ 75 Hz */
> > > >> +		mode->crtc_h_total_disp = 0x009f00d2;
> > > >> +		mode->crtc_h_sync_strt_wid = 0x00120508;
> > > >> +		mode->crtc_v_total_disp = 0x03ff0429;
> > > >> +		mode->crtc_v_sync_strt_wid = 0x00030400;
> > > >> +		mode->crtc_pitch = 0x00a000a0;
> > > >> +		mode->ppll_div_3 = 0x00010078;
> > > >> +#endif
> > > > 
> > > > Mmm... better adding a configuration define here or just remove the
> > > > unused code.
> > > 
> > > Ok, I'm going to drop the unused code then.
> > 
> > No, please keep it as reference in case anybody needs this later.
> 
> Uh? =:-o Why did you change your mind? ;)
> 
> |  Delivery-date: Sun, 01 Apr 2007 15:18:41 +0200
> |  From: Wolfgang Denk <wd@denx.de>
> |  To: Rodolfo Giometti <giometti@enneenne.com>
> |  cc: Markus Klotzb?cher <mk@denx.de>
> |  Subject: Re: [PATCH] ISP116x HCD (Host Controller Driver)
> |
> |  [snip]
> |
> |  Please remove code in "#if 0 ... #endif" blocks.
> |
> |  [snip]
> |
> |  Best regards,
> |
> |  Wolfgang Denk
> 
> However I suggested also to add a configuration define, something
> like:
> 
> #if defined(CFG_ATI_RADEON_60HZ)
> ...
> #elif defined(CFG_ATI_RADEON_75HZ)
> ...
> #else
> #error "..."
> #endif
> 
Please use CONFIG and not CFG too allow this parameter in Kconfig

Best Regards,
J.