From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] Enabling UART0 and UART1
Date: Sat, 16 Feb 2008 06:33:01 +0100 [thread overview]
Message-ID: <200802160633.02151.sr@denx.de> (raw)
In-Reply-To: <1919a34f0802150828oda6a89ev848bdae96771a984@mail.gmail.com>
On Friday 15 February 2008, Sean wrote:
> I have enabled both UART0 and UART 1 using the CONFIG_SERIAL_MULTI in my
> board specific header file. The board is based on PPC 440GX processor. I
> used the serial1_puts and serial1_getc to access the UART1 but without
> access. Does anybody have used this functions before?
Yes, this was tested successfully on multiple 4xx platforms. I don't remember
testing it on a 440GX though. Could be that the pin multiplexing is not
initialized correctly. Please recheck that the GPIO configuration and the PFC
registers are setup correctly for UART1.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
prev parent reply other threads:[~2008-02-16 5:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-15 16:28 [U-Boot-Users] Enabling UART0 and UART1 Sean
2008-02-16 5:33 ` Stefan Roese [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200802160633.02151.sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox