From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Tue, 04 Mar 2008 09:30:00 +0100
Subject: [U-Boot-Users] PPC4xx enet crossover
In-Reply-To: Your message of "Mon, 03 Mar 2008 15:27:05 EST."
	<2C7DE72B9BD00F44BAECA5B0CBB873950729A0@hermes.terascala.com>
Message-ID: <20080304083000.BE3EB24344@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <2C7DE72B9BD00F44BAECA5B0CBB873950729A0@hermes.terascala.com> you wrote:
>
> There were differences in the PHY setup between Linux and U-Boot.
> 
> This patch fixes the problem. Apparently "remote fault" is being set,
> which signals to some devices (on the other end of the cable) that a
> fault has occurred, while other devices ignore it. I believe the RF bit
> was causing the issue, but I removed T4 also, to match up with Linux.

I verified that it fixes the problem with our setup (Sequoia board
with HP Procurve switch), too. I still see a timeout for the very
first packet after a reset, but after that it's working fine.

Thanks.

Could you just please add your Signed-off-by: line?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
At the source of every error which is blamed on the computer you will
find at least two human errors, including the error of blaming it  on
the computer.