From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Tue, 4 Mar 2008 13:23:06 +0100
Subject: [U-Boot-Users] ppc4xx:  PCI init failure on kilauea?
In-Reply-To: <561662.22192.qm@web45108.mail.sp1.yahoo.com>
References: <561662.22192.qm@web45108.mail.sp1.yahoo.com>
Message-ID: <200803041323.07049.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Monday 03 March 2008, H L wrote:
> Yup, that was it!  And along with, of course, the needed J14 jumper.

Right.

> Thank 
> you!
>
> Curiously with an adapter in PCIE0 which comes up fine, one still sees the
> same "complaint" message on the other PCIE slot when there's no adapter
> therein.

This message will always appear when no PCIe board is detected.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================