From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Sat, 08 Mar 2008 01:59:23 +0100
Subject: [U-Boot-Users] [PATCH] mpc83xx: make dtb basename file
	references equal those of linux
In-Reply-To: Your message of "Fri, 07 Mar 2008 14:27:48 CST."
	<47D1A544.1050701@freescale.com>
Message-ID: <20080308005923.EF0FD247AF@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <47D1A544.1050701@freescale.com> you wrote:
>
> > I don't think this is a good idea. File names and board config  names
> > should  match  as  far  as  possible,  and  here is no good reason to
> > deviate from this rule.
> 
> But the DTS files have already been renamed.  The DTS for the MPC832xE-MDS is
> called mpc832x_mds.dts, so the DTB is going to be called mpc832x_mds.dtb.

Well, then undo that change, please?

It doesn't make sense to me. Note that you only  change  the  default
environment,  i.  e.  all the installed systems out in the field will
most probably still use the old names anyway, even if they update  to
a recent version of U-Boot...

> Would you prefer that Kim also renamed MPC832XEMDS.h to MPC832X_MDS.h, as well
> as change the Makefile?

No, definitely not.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The explanation requiring the fewest assumptions is the  most  likely
to be correct.                                    -- William of Occam