[U-Boot-Users] [PATCH] mpc83xx: make dtb basename file references equal those of linux

[Kim Phillips <kim.phillips@freescale.com>]

On Sat, 08 Mar 2008 10:19:56 +0100
Wolfgang Denk <wd@denx.de> wrote:

> Dear Kim,
> 
> in message <20080307204848.8a7b5cba.kim.phillips@freescale.com> you wrote:
> >
> > > I  don't  think  it's  exactly  intuitive  to  have  a  board   named
> > > "mpc832xemds" and the related files use "mpc832x_mds".
> > > 
> > > That looks awfully broken to me.
> > 
> > afaik, you can supposedly buy an mds board with an mpc8321,
> > mpc8321e, mpc8323, or an mpc8323e (the trailing 'e' denotes whether the
> > crypto engine has its fuse intact).  It's just the mpc8323e that is
> > (probably by far) the most common.
> 
> Yes, I know. By "board name" I mean the name of the configuration in
> U-Boot, and the related file names i. e.
> 
> 	Makefile:	MPC8323ERDB_config
> 			MPC832XEMDS_config
> 			MPC832XEMDS_HOST_33_config
> 			MPC832XEMDS_HOST_66_config
> 			MPC832XEMDS_SLAVE_config
> 			MPC832XEMDS_ATM_config
> 	doc/README.mpc8323erdb
> 	doc/README.mpc832xemds
> 	include/configs/MPC8323ERDB.h
> 	include/configs/MPC832XEMDS.h
> 	board/freescale/mpc8323erdb/Makefile
> 	board/freescale/mpc8323erdb/config.mk
> 	board/freescale/mpc8323erdb/mpc8323erdb.c
> 	board/freescale/mpc832xemds/Makefile
> 	board/freescale/mpc832xemds/config.mk
> 	board/freescale/mpc832xemds/mpc832xemds.c
> 	board/freescale/mpc832xemds/pci.c
> 
>   and:
>   	CONFIG_MPC832XEMDS
> 
> 
> compare Linux:
> 
> 	arch/powerpc/configs/mpc832x_mds_defconfig
> 	arch/powerpc/configs/mpc832x_rdb_defconfig
> 	arch/powerpc/boot/dts/mpc832x_mds.dts
> 	arch/powerpc/boot/dts/mpc832x_rdb.dts
> 	arch/powerpc/platforms/83xx/mpc832x_mds.c
> 	arch/powerpc/platforms/83xx/mpc832x_rdb.c
> 
>   and:
>   	CONFIG_MPC832x_MDS
> 
> > linux board support files are consistent /within/ linux, and u-boot
> 
> No, not even this.
> 
> arch/powerpc/boot/dts/mpc832x_mds.dts says:
> 
> 	* MPC8323E EMDS Device Tree Source
> 	 model = "MPC8323EMDS";
> 	 compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
> 
> There is no name with an underscore there.
> 
> > board support files are intra-u-boot consistent; it's just this
> > particular file (the device tree) needs to be inter-linux and u-boot
> > consistent (for interoperability purposes).  Since linux does currently
> 
> As you can see above, there are  more  places  where  the  same  name
> could or rather should be shared between U-Boot and Linux:
> 
> - for the board specific #define's
> - for the board configuration ("MAKEALL foo" resp. "make foo_config"
>   in U-Boot and "make foo_defconfig" in Linux)
> - for the file names in the source trees

you're right..

> Depending on your lab setup, you probably also share between U-Boot
> and Linux
> 
> - the name of the /tftpboot directory
> - the name of the BDI2000 config file
> - the port name on the terminal server for serial console access
> - the port name remote power switch unit
> 
> > host the device tree files, we should probably follow their naming
> > scheme, unless you want to discuss hosting device tree files in
> > u-boot ;).
> > 
> > fyi, the board file was changed in the linux git tree commit
> > be156bed9ebfe365c6d95f715eae3529cf694fcb
> 
> 
> But OK - that's your stuff. I will not block your commit now,  but  I
> really  think this shouldbe cleaned up - in your own interest, and in
> the interest of your users.

I'll have a look into it when I get a chance.

Thanks,

Kim