From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Thu, 13 Mar 2008 20:38:46 +0100
Subject: [U-Boot-Users] PowerPC 405EP - NAND Flash (MT29F2G08AAC)
In-Reply-To: <8ff29df80803131127m202f8674p7be03c6ee60d25de@mail.gmail.com>
References: <8ff29df80803131127m202f8674p7be03c6ee60d25de@mail.gmail.com>
Message-ID: <200803132038.46477.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thursday 13 March 2008, Pawel Pastuszak wrote:
> I trying to get nand flashing working for powerpc 405ep, i am currently
> having some problem with read and writing to the flash. I was wondering if
> anybody got the MT29F2G08 flash working.

Sure. It's working on multiple 405EP implementation I have seen so far. 
Perhaps not exactly with the NAND chips you mentioned. But that shouldn't 
really matter. You are aware that the 405EP doesn't have a build-in NAND 
controller and you need minimal external logic to connect a NAND chip to the 
405EP?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================