[U-Boot-Users] Possible memory leak in cpu/ppc4xx/4xx_enet.c

[Stefan Roese <sr@denx.de>]

Dave,

On Saturday 15 March 2008, Dave Littell wrote:
> I've seen an issue with my 1.3.1-based port of U-Boot where a relatively
> large number of pings issued from the command line will ultimately fail
> with the message:
>
> Cannot allocate private hw data for eth_device...
>
> I looked around this message and it seems that ppc_4xx_eth_initialize()
> malloc()?s a EMAC_4XX_HW_PST structure and assigns it to dev->priv.
> However, nothing ever frees this buffer so standing on a ping will
> ultimately pull down all the available memory.

Hmmm. IIRC ppc_4xx_eth_initialize() is only called once upon bootup for 
ethernet driver initialization. The function called each time before network 
action is ppc_4xx_eth_init().

> One fix might be to free( dev->priv ) at the end of ppc_4xx_eth_halt().
>  I tried this today and noted no ill effects.

So did it work for you?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================