[U-Boot-Users] [PATCH] ppc4xx: Don't use last 256 bytes of SDRAM, workaround for 440EPx CHIP 11 errata

[Stefan Roese <sr@denx.de>]

Hi Wolfgang,

On Thursday 20 March 2008, Wolfgang Denk wrote:
> > This patch adds this workaround for the following 440EPx boards:
> > sequoia, lwmon5. Others should probably follow this example.
>
> OK, the default configs for Sequoia doesn't use shared log buffer, and
> the lwmon5 uses CONFIG_ALT_LB_ADDR (i. e. it puts the log buffer in
> OCM), so these boards will work.
>
> But any changes to the configuration may easily break this again.

Understood.

> I don't like the idea that  each  affected  board  has  to  fix  this
> (probably  differently)  in  it's board config file. I would prefer a
> fix (common to all affected boards) in one central location.

I don't like this either. But I have not come up with a "generic" solution 
till now. It's not so easy since the 440EPx SDRAM setup code is sometimes 
common (cpu/ppc4xx/denali_spd_ddr2.c) and sometimes board specific. And it 
gets even more complicated when ECC initialization is needed too. So 
currently I have no "better" solution as to do it in a board specific way.

As always, patches implementing a "better" more generic solution are welcome.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================