From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 02/11] uec: add support for RGMII_RXID interface mode
Date: Mon, 24 Mar 2008 20:46:28 +0300 [thread overview]
Message-ID: <20080324174628.GB19904@localhost.localdomain> (raw)
In-Reply-To: <20080324174449.GA17079@localhost.localdomain>
PHY drivers will use it to setup software delay between RXD and RXC
signals.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/qe/uec.c | 1 +
drivers/qe/uec.h | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 55f37cb..d34430c 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -417,6 +417,7 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
break;
+ case ENET_1000_RGMII_RXID:
case ENET_1000_RGMII:
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
upsmr |= UPSMR_RPM;
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index c384055..7762de6 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -642,6 +642,7 @@ typedef enum enet_interface {
ENET_100_RGMII,
ENET_1000_GMII,
ENET_1000_RGMII,
+ ENET_1000_RGMII_RXID,
ENET_1000_TBI,
ENET_1000_RTBI
} enet_interface_e;
--
1.5.2.2
next prev parent reply other threads:[~2008-03-24 17:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-24 17:44 [U-Boot-Users] [PATCH 0/11] Few MPC8360E-RDK related patches Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 01/11] uec: add support for gbit mii status readings Anton Vorontsov
2008-03-25 1:08 ` Kim Phillips
2008-03-24 17:46 ` Anton Vorontsov [this message]
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 03/11] uec: add support for Broadcom BCM5481 Gigabit PHY Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 04/11] mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 05/11] mpc83xx: MPC8360E-RDK: add support for NAND Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 06/11] mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 07/11] mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 08/11] mpc83xx: MPC8360E-RDK: add dhcp command Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 09/11] mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 10/11] mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 11/11] mpc83xx: add "fsl, soc" and "fsl, immr" compatible fixups Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080324174628.GB19904@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox