From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 04/11] mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
Date: Mon, 24 Mar 2008 20:46:46 +0300 [thread overview]
Message-ID: <20080324174646.GD19904@localhost.localdomain> (raw)
In-Reply-To: <20080324174449.GA17079@localhost.localdomain>
This is needed for BCM PHYs to work on this board.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
include/configs/MPC8360ERDK.h | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 27b037a..1588610 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -290,7 +290,7 @@
#define CFG_UEC1_TX_CLK QE_CLK9
#define CFG_UEC1_ETH_TYPE GIGA_ETH
#define CFG_UEC1_PHY_ADDR 2
-#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
#endif
#define CONFIG_UEC_ETH2 /* GETH2 */
@@ -301,7 +301,7 @@
#define CFG_UEC2_TX_CLK QE_CLK4
#define CFG_UEC2_ETH_TYPE GIGA_ETH
#define CFG_UEC2_PHY_ADDR 4
-#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
#endif
/*
--
1.5.2.2
next prev parent reply other threads:[~2008-03-24 17:46 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-24 17:44 [U-Boot-Users] [PATCH 0/11] Few MPC8360E-RDK related patches Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 01/11] uec: add support for gbit mii status readings Anton Vorontsov
2008-03-25 1:08 ` Kim Phillips
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 02/11] uec: add support for RGMII_RXID interface mode Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 03/11] uec: add support for Broadcom BCM5481 Gigabit PHY Anton Vorontsov
2008-03-24 17:46 ` Anton Vorontsov [this message]
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 05/11] mpc83xx: MPC8360E-RDK: add support for NAND Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 06/11] mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI Anton Vorontsov
2008-03-24 17:46 ` [U-Boot-Users] [PATCH 07/11] mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 08/11] mpc83xx: MPC8360E-RDK: add dhcp command Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 09/11] mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 10/11] mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK Anton Vorontsov
2008-03-24 17:47 ` [U-Boot-Users] [PATCH 11/11] mpc83xx: add "fsl, soc" and "fsl, immr" compatible fixups Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080324174646.GD19904@localhost.localdomain \
--to=avorontsov@ru.mvista.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox