[U-Boot-Users] [PATCH 06/11] mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI

[Anton Vorontsov <avorontsov@ru.mvista.com>]

This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
controller and FHCI (QE USB).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 board/freescale/mpc8360erdk/mpc8360erdk.c |   17 +++++++++++++++++
 1 files changed, 17 insertions(+), 0 deletions(-)

diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c
index 8005a50..3bcdda7 100644
--- a/board/freescale/mpc8360erdk/mpc8360erdk.c
+++ b/board/freescale/mpc8360erdk/mpc8360erdk.c
@@ -186,6 +186,23 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{1,  7, 1, 0, 0}, /* LVDS_BKLT_CTR */
 	{2, 16, 1, 0, 0}, /* LVDS_BKLT_EN */
 
+	/* AD7843 ADC/Touchscreen controller */
+	{4, 14, 1, 0, 0}, /* SPI_nCS0 */
+	{4, 28, 3, 0, 3}, /* SPI_MOSI */
+	{4, 29, 3, 0, 3}, /* SPI_MISO */
+	{4, 30, 3, 0, 3}, /* SPI_CLK */
+
+	/* Freescale QUICC Engine USB Host Controller (FHCI) */
+	{1,  2, 1, 0, 3}, /* USBOE */
+	{1,  3, 1, 0, 3}, /* USBTP */
+	{1,  8, 1, 0, 1}, /* USBTN */
+	{1,  9, 2, 1, 3}, /* USBRP */
+	{1, 10, 2, 0, 3}, /* USBRXD */
+	{1, 11, 2, 1, 3}, /* USBRN */
+	{2, 20, 2, 0, 1}, /* CLK21 */
+	{4, 20, 1, 0, 0}, /* SPEED */
+	{4, 21, 1, 0, 0}, /* SUSPND */
+
 	/* END of table */
 	{0,  0, 0, 0, QE_IOP_TAB_END},
 };
-- 
1.5.2.2