[U-Boot-Users] [PATCH 07/11] mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc

[Anton Vorontsov <avorontsov@ru.mvista.com>]

Current DDR setup easily causes memory corruption, this patch fixes it.

Also fix TIMING_CFG0_MRS_CYC definition.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 include/configs/MPC8360ERDK.h |   48 ++++++++++++++++++++++++++++++----------
 include/mpc83xx.h             |    3 +-
 2 files changed, 38 insertions(+), 13 deletions(-)

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 97797cc..ba25a59 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -89,8 +89,8 @@
 
 #define CFG_83XX_DDR_USES_CS0
 
-#undef CONFIG_DDR_ECC		/* support DDR ECC function */
-#undef CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+#define CONFIG_DDR_ECC		/* support DDR ECC function */
+#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
 
 /*
  * DDRCDR - DDR Control Driver Register
@@ -104,20 +104,44 @@
  */
 #define CONFIG_DDR_II
 #define CFG_DDR_SIZE		256 /* MB */
-#define CFG_DDRCDR		0x80080001
 #define CFG_DDR_CS0_BNDS	0x0000000f
 #define CFG_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \
-				 CSCONFIG_COL_BIT_10)
-#define CFG_DDR_TIMING_0	0x00330903
-#define CFG_DDR_TIMING_1	0x3835a322
-#define CFG_DDR_TIMING_2	0x00104909
-#define CFG_DDR_TIMING_3	0x00000000
-#define CFG_DDR_CLK_CNTL	0x02000000
+				 CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
+#define CFG_DDR_SDRAM_CFG	(SDRAM_CFG_SDRAM_TYPE_DDR2 | SDRAM_CFG_ECC_EN)
+#define CFG_DDR_SDRAM_CFG2	0x00001000
+#define CFG_DDR_CLK_CNTL	(DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CFG_DDR_INTERVAL	((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+				 (1115 << SDRAM_INTERVAL_REFINT_SHIFT))
 #define CFG_DDR_MODE		0x47800432
 #define CFG_DDR_MODE2		0x8000c000
-#define CFG_DDR_INTERVAL	0x045b0100
-#define CFG_DDR_SDRAM_CFG	0x03000000
-#define CFG_DDR_SDRAM_CFG2	0x00001000
+
+#define CFG_DDR_TIMING_0	((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+				 (9 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+				 (3 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+				 (3 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+				 (0 << TIMING_CFG0_WWT_SHIFT) | \
+				 (0 << TIMING_CFG0_RRT_SHIFT) | \
+				 (0 << TIMING_CFG0_WRT_SHIFT) | \
+				 (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CFG_DDR_TIMING_1	((      TIMING_CFG1_CASLAT_30) | \
+				 ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
+				 ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+				 ( 3 << TIMING_CFG1_WRREC_SHIFT) | \
+				 (10 << TIMING_CFG1_REFREC_SHIFT) | \
+				 ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+				 ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+				 ( 3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CFG_DDR_TIMING_2	((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+				 (4 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+				 (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+				 (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+				 (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+				 (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+				 (0 << TIMING_CFG2_CPO_SHIFT))
+
+#define CFG_DDR_TIMING_3	0x00000000
 
 /*
  * Memory test
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index df052e3..20df166 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -880,7 +880,7 @@
 #define TIMING_CFG0_PRE_PD_EXIT_SHIFT	16
 #define TIMING_CFG0_ODT_PD_EXIT		0x00000F00
 #define TIMING_CFG0_ODT_PD_EXIT_SHIFT	8
-#define TIMING_CFG0_MRS_CYC		0x00000F00
+#define TIMING_CFG0_MRS_CYC		0x0000000F
 #define TIMING_CFG0_MRS_CYC_SHIFT	0
 
 /* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
@@ -903,6 +903,7 @@
 #define TIMING_CFG1_WRTORD_SHIFT	0
 #define TIMING_CFG1_CASLAT_20		0x00030000	/* CAS latency = 2.0 */
 #define TIMING_CFG1_CASLAT_25		0x00040000	/* CAS latency = 2.5 */
+#define TIMING_CFG1_CASLAT_30		0x00050000	/* CAS latency = 2.5 */
 
 /* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2
  */
-- 
1.5.2.2