From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Thu, 27 Mar 2008 15:09:23 +0100
Subject: [U-Boot-Users] Current U-Boot doesn't boot device tree enabled
	kernel anymore
Message-ID: <200803271509.23870.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

I just ran into a problem with current U-Boot on Kilauea and device tree 
enabled Linux kernel (arch/powerpc). After updating U-Boot the kernel doesn't 
boot anymore:

=> run net_nfs_fdt
Waiting for PHY auto negotiation to complete... done
ENET Speed is 1000 Mbps - FULL duplex connection (EMAC0)
Using ppc_4xx_eth0 device
TFTP from server 10.0.0.152; our IP address is 10.0.0.182
Filename 'kilauea/uImage'.
Load address: 0x200000
Loading: #################################################################
         #######################
done
Bytes transferred = 1288707 (13aa03 hex)
ENET Speed is 1000 Mbps - FULL duplex connection (EMAC0)
Using ppc_4xx_eth0 device
TFTP from server 10.0.0.152; our IP address is 10.0.0.182
Filename 'kilauea/kilauea.dtb'.
Load address: 0x400000
Loading: #
done
Bytes transferred = 8000 (1f40 hex)
## Booting kernel from Legacy Image at 00200000 ...
   Image Name:   Linux-2.6.25-rc7-next-20080327-d
   Created:      2008-03-27  13:51:18 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1288643 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
ERROR: image overwritten - must RESET the board to recover.


Before updating U-Boot I am able to boot exactly this kernel/dtb combination 
without problems:

=> run net_nfs_fdt
Waiting for PHY auto negotiation to complete... done
ENET Speed is 1000 Mbps - FULL duplex connection (EMAC0)
Using ppc_4xx_eth0 device
TFTP from server 10.0.0.152; our IP address is 10.0.0.182
Filename 'kilauea/uImage'.
Load address: 0x200000
Loading: #################################################################
         #######################
done
Bytes transferred = 1288707 (13aa03 hex)
ENET Speed is 1000 Mbps - FULL duplex connection (EMAC0)
Using ppc_4xx_eth0 device
TFTP from server 10.0.0.152; our IP address is 10.0.0.182
Filename 'kilauea/kilauea.dtb'.
Load address: 0x400000
Loading: #
done
Bytes transferred = 8000 (1f40 hex)
## Booting image at 00200000 ...
   Image Name:   Linux-2.6.25-rc7-next-20080327-d
   Created:      2008-03-27  13:51:18 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1288643 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using the fdt at 0x400000
Using Kilauea machine description
...


Any ideas?

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================