From: Sascha Laue <Sascha.Laue@gmx.biz>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] bugfix: the watchdog post for lwmon5
Date: Tue, 01 Apr 2008 15:13:03 +0200 [thread overview]
Message-ID: <20080401131303.17520@gmx.net> (raw)
In-Reply-To: <20080401083320.B918D24544@gemini.denx.de>
You are right! I've checked it again and find the mistake by myself.
Subject: [PATCH] bugfix: lwmon5 watchdog post
If the hardware watchdog detects a voltage error, the watchdog set GPIO62 to low.
The watchdog POST have to detect this lowpegel.
Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
---
post/board/lwmon5/watchdog.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c
index 48ff687..899fbfb 100644
--- a/post/board/lwmon5/watchdog.c
+++ b/post/board/lwmon5/watchdog.c
@@ -55,7 +55,7 @@ static void watchdog_magic_write(uint value)
int sysmon1_post_test(int flags)
{
- if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
+ if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS) == 0) {
/*
* 3.1. GPIO62 is low
* Assuming system voltage failure.
--
1.5.2.4
-------- Original-Nachricht --------
> Datum: Tue, 01 Apr 2008 10:33:20 +0200
> Von: Wolfgang Denk <wd@denx.de>
> An: "Sascha Laue" <Sascha.Laue@gmx.biz>
> CC: u-boot-users at lists.sourceforge.net
> Betreff: Re: [U-Boot-Users] [PATCH] bugfix: the watchdog post for lwmon5
> In message <20080401075941.145820@gmx.net> you wrote:
> > bugfix: the watchdog post for lwmon5 doesn't work. This Patch fix it.
> > To trigger and activate the watchdog correct it is necessary to create 2
> pulses.
> > Lowpegel on GPIO62 point to a voltagefailure.
>
> Please fix English ("correct", "Lowpegel", "voltagefailure").
>
> Is it really 2 pulses - or just one, consisting of
>
> > Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
> ...
> > - if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
> > + if (0 == gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
>
> Please write that as:
>
> if (gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS) == 0) {
> or
> if (!gpio_read_in_bit(CFG_GPIO_SYSMON_STATUS)) {
>
> > * 3.1. GPIO62 is low
> > * Assuming system voltage failure.
> > @@ -99,6 +99,9 @@ int lwmon5_watchdog_post_test(int flags)
> > ints = disable_interrupts ();
> > /* 3.2.2. strobe watchdog once */
> > WATCHDOG_RESET();
> > + base = post_time_ms (0);
> > + while (post_time_ms (base) < 2)
> > + WATCHDOG_RESET();
>
> Are you absolutely sure that is needed?
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Tactical? TACTICAL!?!? Hey, buddy, we went from kilotons to megatons
> several minutes ago. We don't need no stinkin' tactical nukes. (By
> the way, do you have change for 10 million people?) - lwall
next prev parent reply other threads:[~2008-04-01 13:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-01 7:59 [U-Boot-Users] [PATCH] bugfix: the watchdog post for lwmon5 Sascha Laue
2008-04-01 8:33 ` Wolfgang Denk
2008-04-01 11:32 ` Wolfgang Denk
2008-04-01 13:13 ` Sascha Laue [this message]
2008-04-14 6:33 ` Wolfgang Denk
2008-04-14 17:44 ` Detlev Zundel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080401131303.17520@gmx.net \
--to=sascha.laue@gmx.biz \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox