[U-Boot-Users] Please pull u-boot-mpc83xx.git

[Wolfgang Denk <wd@denx.de>]

In message <20080328190420.509c7d43.kim.phillips@freescale.com> you wrote:
> On Fri, 28 Mar 2008 18:49:59 -0500
> Kim Phillips <kim.phillips@freescale.com> wrote:
> 
> > Wolfgang D.,
> > 
> > please pull SATA configuration patches for 8315 and 837x boards, a
> > cleanup of the 83xx SPRIDR code, and some 8323 rdb fixes:
> > 
> ok, I've pushed Joakim's relocation fixes patch.  New summary looks
> like:
> 
> Dave Liu (2):
>       mpc83xx: initialize serdes for MPC837xEMDS boards
>       mpc83xx: enable the SATA interface on mpc837xemds board
> 
> Joakim Tjernlund (1):
>       Make MPC83xx one step closer to full relocation.
> 
> Kim Phillips (4):
>       mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
>       mpc83xx: unreinvent mem_clk
>       mpc83xx: display ddr frequency in board_add_ram_info banner
>       mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
> 
> Michael Barkowski (2):
>       mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
>       mpc8323erdb: fix EEPROM page size and get MAC from EEPROM

Applied, thanks.

The merge caused a conflict in lib_ppc/board.c - please check if
everything looks OK for you. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Human beings were created by water to transport it uphill.