From mboxrd@z Thu Jan  1 00:00:00 1970
From: Wolfgang Denk <wd@denx.de>
Date: Mon, 14 Apr 2008 21:50:50 +0200
Subject: [U-Boot-Users] [PATCH] Add support for Atmel flash
In-Reply-To: Your message of "Sun, 13 Apr 2008 15:36:58 +0200."
	<1208093818.23686.11.camel@voyager.dsnet>
Message-ID: <20080414195050.4D7E5248BB@gemini.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <1208093818.23686.11.camel@voyager.dsnet> you wrote:
> 
> Le samedi 12 avril 2008 =E0 21:03 +0200, Ulf Samuelsson a =E9crit :
> > Add ID codes for most recent Atmel NOR flashes
> 
> Is there any added value on using the atmel flash driver instead of the
> standard CFI driver ? It surely doesn't have any on the SAM9/CAP9
> boards, but I'm not sure of the older AT91RM9200.

I don't think there is.

For the existing boards, the already exisitng values should be
sufficient, and for new boards we should use the CFI driver.

I intend to NAK new boards with CFI conformant flashes that don't use
the CFI driver unless thay have very good reasons.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The more data I punch in this card,  the lighter it becomes, and the
lower the mailing cost."
                     - Stan Kelly-Bootle, "The Devil's DP Dictionary"