From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rodolfo Giometti <giometti@enneenne.com>
Date: Thu, 17 Apr 2008 10:23:43 +0200
Subject: [U-Boot-Users] Again on PCMCIA/IDE and PXA270
In-Reply-To: <20080417034924.GA3353@game.jcrosoft.org>
References: <20080416164606.GE9860@enneenne.com>
	<20080417034924.GA3353@game.jcrosoft.org>
Message-ID: <20080417082343.GA12487@enneenne.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Thu, Apr 17, 2008 at 05:49:24AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 18:46 Wed 16 Apr     , Rodolfo Giometti wrote:
> > Hello,
> > 
> > Using a 1GB CF on my system I get:
> > 
> >    equantum> pinit on
> >    KINGSTON CF CARD 1GB
> >                Fixed Disk Card
> >                IDE interface 
> >                [silicon] [unique] [single] [sleep] [standby] [idle] [low power]
> >    equantum> ide reset
> > 
>  Could you gice more information about your environment : u-boot
>  version, hard init, etc...

Yes, sorry. u-boot version 1.2.0 running on PXA270 based board.

What do you mean by "hard init"? The GPIOs settings or so?

>  And also could specify the Voltage of the Flash that you use 3.3V, 5V,
>  3.3/5V.

The voltage is 3.3.

Thanks for your help,

Rodolfo

-- 

GNU/Linux Solutions                  e-mail:    giometti at enneenne.com
Linux Device Driver                             giometti at linux.it
Embedded Systems                     phone:	+39 349 2432127
UNIX programming                     skype:     rodolfo.giometti