From mboxrd@z Thu Jan  1 00:00:00 1970
From: Stefan Roese <sr@denx.de>
Date: Wed, 23 Apr 2008 16:25:29 +0200
Subject: [U-Boot-Users] ppc4xx: gpio setup broken for ppc405ep
In-Reply-To: <200804230854.22005.super.firetwister@gmail.com>
References: <6a6049b80803271104x598b47adta1dc97f9d13102c@mail.gmail.com>
	<6a6049b80803310433h6e237542te056fc755a0dcf2a@mail.gmail.com>
	<200804230854.22005.super.firetwister@gmail.com>
Message-ID: <200804231625.30003.sr@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday 23 April 2008, Markus Brunner wrote:
> After some emails with John from AMCC here are the Results:
>
> About the "random" tri-state select settings in the tables for alternate
> function for 440EP

Thanks for the update here.

<snip>

> The high/low addresses of the select registers of 405EP and the way they
> are assigned to the pins are like any other amcc processor. This means the
> current Users manual is wrong and will be updated.

OK, thanks for contacting AMCC here.

<snip>

> So we've got to change something with the gpio setup.

Patches welcome. :)

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================